I have a label control. I added table dynamically into the label. and dynamically buttons into table cells. On button click of each cell raises a popup where I can add a item. Now I have a problem, My table is not refreshing when I added the items and closed the popup. But they are adding on the next event raise.
View 5 RepliesI have a parent control and a child control. On parent control load I am setting a cookie value. On child control I am checking if this cookie is not null then call parent control's CalculateDeliveryAndTax() method. How should I go about accessing from child control, parent control's CalculateDeliveryAndTax() method.
View 2 Repliesi have the following scenario: one formview. when in editmode there is a child formview linked to the other by a column value. i need to take the value of one of the values of parent formview controls and set it to a textbox of child formview in insert mode. I wish to know which event should I use in codebehind to bind both controls? (that escenario will have paging and must keep the binding as if it was master detail)
View 9 RepliesI Have a webpage suppose ParentPage.aspx which contains a iframe. Under iframe i am calling another webpage Childpage.aspx . Now i want to access ParentPage controls from ChildPage and change the property of that control.
how it is possible ?
Below i am writing a code which i am trying. In this code Page.PreviousPage is always null .
[code]....
C#- bind treeview runtime using dataset and data table
simple example
In asp.net, I have a parent and a child control. Within the child control I have a dropdown list. Based on dropdown list's selected value I would like to toggle Visibility of Panel in parent control. For instance if I select Show in child control dropdown list, I need to pass true to parent control to make Panel visible and vice versa. How should I do that. I have read that can be done via the event handling and have seen certain scenarios but I am not clear on that.
View 3 RepliesIm having the flowwing problem i have a gridview that i want to list many records when i click on a row iwant to be able to click on a button and go to the form of this record in order to update it. All the navigation works fine.I click on the button and then using javascript i window.open the page that has the form the problem is that when the new page loads the parent page (the page that has the gridview refreshes and because there are many records it is really annoying how can i use window open to pop up a child page without having the parent window to refresh.
Because im using all this in a dotnetnuke framework i have tried enabling and disabling partial rendering to the parent page page but always refreshes when i open the child window
Using vb.net/asp.net 2005.
I have a page books.aspx that has a control named authors.ascx.
Inside the authors control there is a "select" button I want to add some kind of listener or event handler (not sure of the correct terminology) so on the parent page (books.aspx) I can respond to the "select" button being clicked.
I have to pass the authorID from the user control to the parent page.
In my authors.ascx control I just created this event:
[Code]....
Now I need to write the function for SelectAuthorBtnClick and I think add some kind of listener in the parent page to listen and handle the event.
If for example my userControl has a CheckBox called IsGreatCoder and the userControl is embedded in a main page (parent page).
I normally have gained access to the IsGreatCoder.Checked value in the main-page by exposing it through a public property that I have to manually write (say "IsAGreatCoder").
If UserControl is included in the main page as "userControl1", then I would access it as "userControl1.IsAGreatCoder".
But, I was wondering if there was anyway to declare the UserControl such that all the UI controls added to it were declared as being public, that way allowing me to gain access to the actual controls in the main page (the parent).
Essentially I would like to be able do something like userControl1.IsGreatCoder.Checked instead of having to implement a property.
The reason I want to do this is that I want to have access to many more of the check-box's properties and it would be a pain to implement each one as a public property.
I have the next aspx page.
<%@ Page Title="" Language="C#" MasterPageFile="~/MasterPage.Master" AutoEventWireup="true"
CodeBehind="newsEditor.aspx.cs" Inherits="ExpertSiteV2.newsEditor" %>[code]....
In some situation i want to delete all the contents of Panel1. I write in the code:
Panel1.Controls.Clear();
But it doesn't work and i get message: Page cannot be null. Please ensure that this operation is being performed in the context of an ASP.NET request.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: Page cannot be null. Please ensure that this operation is being performed in
the context of an ASP.NET request.
Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace: [InvalidOperationException: Page cannot be null. Please ensure that this operation is being performed in the context of an ASP.NET request.]
System.Web.UI.ScriptManager.get_IPage()
+373832 System.Web.UI.ScriptManager.OnPagePreRenderComplete(Object
sender, EventArgs e) +54
System.Web.UI.Page.OnPreRenderComplete(EventArgs
e) +8698462
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean
includeStagesAfterAsyncPoint) +1029
Blockquote
What's wrong? Or how should i do this properly?
I have a user control which contains two text fields each assigned with requiredfield validators this control contains another user control contains say a button .On click of this button i need to validate the fields from the parent control text fields.I try the Page.Validate("ValidationGroup") with Page.IsValid it validates but the error message is not shown .Error message is shown only if i try to validate it from the contains which contains the required field validators ?
View 1 RepliesI have parent form in which i have two buttons. button1 and button2. By clicking on button1 a model popup widow shows. In popup window i have a button like button3 what i need that by cliking on button3 on popup page i want to fire button2 event on parent page and close popup page.
View 1 RepliesI want to bind parent repeater item index in child repeater control using inline code not code behind side.
For example
[Code]....
I have a 2 part question for web user controls: 1. I want to have an event fire in my user control, but have it be consumed by the parent page, like:
<asp1:Object id="objectMain" runat="server" OnClick="Click" />
Is it possible to do this? Or do I need to make a server control for this functionality? I have it being able to be set in the Page_Init, but I'd like to make it as similar to actual controls as possible. Also, if it is possible to access via the Events section under Properties, that would be good and 2. I am trying to register the web user control as an AsyncPostbackTrigger for another UpdatePanel. With the previous question in mind, is it also possible to set this via the GUI, or does this need to be set programmatically as well?
I have an EDIT.ASPX page and on that page I have some labels and textboxes and a user control. I listed all the related codes you can have a clear picture - not all of the codes are given me a problem. ONLY ONE.
HELP ---> On the Uer control (SiteTemplate2.ascx) I have a DataList that is being populated by the database and that works fine. I have a
CHECKBOX on the user control page each time the user check the CHECKBOX the user control content totally disappears from the EDIT.ASPX page. There is no error message -- I believe this is a post back error but I don't know how to fix it.
Goal: Each time the checkbox called (CHKBSideBar) is clicked on the user control page all of the page content should stay in place that include
EDIT.ASPX Page and the refeneced USER CONTROL. I should be implement a CheckedChanged Function without either of the pages lossing DATA. I need to be able to access post back event from the user control of the Edit.aspx page. When the user click a box on the user control page how do I keep the same Page_Load event on the edit page. I need to reference the Edit page from the user control.
Note: The edit page loads the user control (SiteTemplate2.ascx)SEE CODES BELOW
I know this is a lot and thank you in advanced for your help. I tried to include all the pages that are key players. I must user the user control bacuase the user can select different template so eliminating the user control is not an option.
'*******************************************************************
The user control is being referenced from the web.config file ** Works find! **
[Code]....
EDIT.ASPX Page **-- WORKS FINE!** [Code]....
since APS.Net 4.0 I have a curious problem with an event.
There is a FormView and inside of the EditItem there is a GridView. In the Footer of the GridView I put Controls for inserting records.
But when I fire a markup defined RowCommand of that GridView then the same event is getting fired for the Parent FormView. First I had 'Insert' as the CommandName and so I was getting the Error that my FormView had to be in insert mode to insert a record. Then I changed the RowCommand of the GridView to 'xxx' and I got also the RowCommand 'xxx' at the RowCommand eventhandler of the Parent FormView.
The project was migrated from .Net 3.5 a few days ago, but nothing was manually changed in the code/markup. And the problem was not there with the "old" framework.
[Code]....
Of course, I could simply change the CommanName of the LinkButton e.g. to 'InsertChild' but I would like to know:
Is this a known change or a bug of ASP.Net 4.0?
i have 2 combobox A & B.. the values in B is populated according to selected value in A,, my code works fine when i click combo A and select a item,, the values according to it get populated on combo B. i have written it on the change event...
But when i use tab to navigate and select the items in combo A and change on pressing keyboard down key...the items in combo B is not getting populated with new values.. existing values does not get changed,,, ie change event is not getting fired... how can i manage it in down/up key in keyboard when using tab,,,,
I have a LinkButton within a User Control and it has handled with:
Private Sub LoginLinkLinkButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles LoginLinkLinkButton.Click
Response.Redirect("/", True)
End Sub
On certain ASPX pages I would like to handle the click from the page's code behind, opposed to within the user control. How do I override the handle within the control from the parent's code behind page?
Update:
Based on the answer, I have the following no added to the User Control:
[code]....
The problem is determining the correct syntax for the if line because the above is invalid.
I have a control that handles commenting. In this control, I have set a delegate event handler for sending an email.
I then have various types of controls, e.g. blog, articles etc, each of which may or may not have the commenting control added (which is done dynamically with me not knowing the id's), i.e. the commenting control is added outside this control. Each of these controls handles it's emailing differently(hence the event).
What I'm trying to determine, is how to assign the event in the parent control. At the moment, I'm having to recursively search through all the controls on the page until I find the comment control, and set it that way. Example below explains:
COMMENTING CONTROL
public delegate void Commenting_OnSendEmail();
public partial class Commenting : UserControl
{
public Commenting_OnSendEmail OnComment_SendEmail();
private void Page_Load(object sender, EventArgs e)
{
if(OnComment_SendEmail != null)
{
OnComment_SendEmail();
}
}
}
PARENT CONTROL
public partial class Blog : UserControl
{
private void Page_Load(object sender, EventArgs e)
{
Commenting comControl = (Commenting)this.FindControl<Commenting>(this);
if(comControl != null)
{
comCtrol.OnComment_SendEmail += new Commenting_OnSendMail(Blog_Comment_OnSendEmail);
}
}
}
EDIT:
The reason I ask is that if I search from this.Page as the initial control, I am worried about time taken to search down the control tree to find it. Each different type of page would be different in how many control it would have. On some testing, it returns back quite quickly the result.
Is there a client side event that occurs on a user control when its parent submits to the server?
View 1 RepliesSimple and blunt: my cascading dropdownlists clear when a postback occurs. Does anyone know a quick way around that?For more information, read on...
I have 5 dropdown lists that define a training class location and line of business: Site, Parent Client, Client, Program, Project I'm trying to build cascading dropdownlists that can work from any direction (i.e. select a site and all other lists are filtered by site...select a project and all other dropdown lists are filtered by project). I've built the SQL Select statement behind the lists that filters (accurately).
i want to access the child datagrid controls from parent datagrid command event.
View 4 RepliesI am using a form view control which has two binded textbox. Now at this level it works fine and the textboxes show the values from database. But when i insert a panel inside the form view and move these two textboxes inside the panel, they dont show any values. What could be the reason for this?
View 2 RepliesI had a little project is create dynamic control. My project had get detail of content and replace in sign string, Add control in sign. After click button I will find in control, I had added on page load in panel. I can't get value in child control panel, Don't have control in panel. My source is
protected void Page_Load(object sender, EventArgs e)
{
string config_design = GetConfigueKey(configDesign);
Genform(config_design, GetContent(config_design));
if (IsPostBack)
{
btn_submit_click(sender, e);
}
else
{
string config_design = GetConfigueKey(configDesign);
Genform(config_design, GetContent(config_design));
}
}
protected String GetContent(string designname)
{
string rev = "";
mClsDB = new clsConn();
strSql = "SELECT STR_DESIGN_CONTENT,STR_DESIGN_NAME,INT_FORM_ID FROM TBL_DESIGN WHERE INT_DESIGN_ID = " + designname + " ";
DataTable dt = mClsDB.GetDataTable(strSql);
if (dt != null)
{
if (dt.Rows.Count > 0)
{
rev = dt.Rows[0]["STR_DESIGN_CONTENT"].ToString();
}
}
return rev;
}
protected void Genform(string designname, string content)
{
string rev = content;
mClsDB = new clsConn();
//strSQL = " SELECT INT_FIELD_ID,STR_FIELD_NAME,STR_FIELD_SIZE,STR_FIELD_CSS,STR_FIELD_DEFAULTVALUE,BIT_FIELD_VISIBLE,INT_FIELD_VALIDATE_TYPE,STR_FIELD_MINMAX,STR_FIELD_TYPE_NAME ";..................
Adding an ImageButton to the ImageMap control as a child control. I am developing a map that will be contained some user-defined nodes. The user can click anywhere of the map to add the node to that location. X locations and Y Locations are stored in the database. Initializing the page all stored nodes will be created programmatically. My problem is that the created nodes are invisible. If I replace the ImageMap with a panel control then all dynamically created nodes will be visible but in this situation I cannot capture the X and Y locations.
protected System.Web.UI.WebControls.ImageButton
btn;
protected void Page_Load(object sender,
EventArgs e)
{
btn.ImageUrl = "Images/..."
}
override protected
void OnInit(EventArgs e)
{
btn = new ImageButton();
btn.ID = "btn1";
btn.Style["Position"] =
"Absolute";
btn.Style["Top"] =
"100px";
btn.Style["Left"] =
"100px";
ImageMap1.Controls.Add(btn);//... invisible nodes
// Panel1.Controls.Add(btn);//... visible nodes
base.OnInit(e);
}
So I have one of the following problems:
1. Adding child to the ImageMap Control OR
2. Capturing the mouse X and Y Locations in the panel