Web Forms :: How To Install Project To Web Domain
May 5, 2013I just want to place a .net project in the domain. What the process I have to follow. And I don't have a any knowledge about domain and placing the project on the domain.
View 1 RepliesI just want to place a .net project in the domain. What the process I have to follow. And I don't have a any knowledge about domain and placing the project on the domain.
View 1 RepliesAnyway, I need to pick up on another person's project who has left and essentially what I have is his code base which compiles under Visual Studio2010 Ultimate. I need to dig into his code (VisualBasic) in order to fix some minor problem & make some enhancements. So anyway, I started it up and compiled everything. Then I press the little green arrow button, and the project starts up and launch the browser which then access and run this project. However I need to run this under IIS because I have to try access the webservice from a remote platform. Meaning this has to serve a remote connection and not just the browser from within VisualStudio. Could someone give me a little howto in order to set this up and running under IIS?
View 2 Replieswhen i install the setup ,i want to install whereever i want That means ,i want to browse the mycomputer folders
View 2 RepliesThe last phase of the installer fails with this message:Installation IncompleteThe installer was interrupted before [project] could be installed. You need to restart the installer to try again.
Running msiexec /i installer.msi /l*vx setup.log shows the following entries in the setup log:
INFO : [...] [ApplyWebFolderProperties]: Getting web folder property token...
INFO : [...] [ApplyWebFolderProperties]: Token is '/LM/W3SVC/1/ROOT/ProjectDir/DynamicData/Filters'.
INFO : [...] [ApplyWebFolderProperties]: Getting METADATA_HANDLE for the directory '/LM/W3SVC/1/ROOT/ProjectDir/DynamicData/Filters'.
[code]...
I got a new domain name for my project that I developped and I went in and changed all the old domain names to the new ones thru out the project and it actaully seemed to work. For a few days now when I first go to the page it askes me to login like it should then when I navigate to other pages it asks for login again once logged in that page then works well if I navigate to a new page for the session it asks again to login. I am using forms authentication.
View 5 RepliesMy root problem is that I get the following error message from my CruiseControl server :
errorMSB4019: The imported project "C:Program FilesMSBuildMicrosoftVisualStudiov10.0WebApplicationsMicrosoft.WebApplication.targets" was not found.
I know all i have to do to workaround this issue is to copy the files to the folder but I just can't found anyone having thoses files and based on this thread I tried to "explicitly install the Web Application Project support on my machine" BUT I don't have such an option from the Microsoft Visual Studio 2010 Professional Setup tool ...where can I found the content of the following folder : C:Program
FilesMSBuildMicrosoftVisualStudiov10.0WebApplications ?
I tried to install VS 2008 on my different systems already having Framework 2 installed, it failed to install. I tried it may a times even on different systems. It runsbut after Serial No. and next i see error .net framework 3.5 installation failed and there down a list of all componetns it shown which have not been attempted. I am going to devlpe the software and without t i can;t do anything..
View 2 RepliesThe following code works as it was originally designed to move a file from one directory to another directory on the same server, but I need to change it to work so it will move a file from one server to another server. My challenge is how to define the source directory on a different server and check if file exists.
Code behind:
Protected Sub btnSubmit_Click(ByVal sender
As Object, ByVal e As System.EventArgs)
Handles btnSubmit.Click
[Code]....
when i try to install sql server 2005 in my laptop its shows warning that my IIS might be not install or diable.i install IIS before instaltion of SQL SERVER. its perfly running , i am running my apllication in IISi cant understand why SQL SERVER shows this warnign due to this warning my managment studio is not install .i am using WIndows 7 home premiunam o.s.
View 4 RepliesI have also installed SSL on a subdomain. I have put payment page under this sub domain.
View 4 RepliesMy feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 1 RepliesWe have a ASP.NET site that partially depends on forms authentication for login credentials, however the implementation of IPrincipal is completely custom.
But, when running the site on a particular server (which is somewhat semi-hardened when it comes to security), the app crashes when invoking IPrincipal.IsInRole() with the following messsage:
System.SystemException: The trust relationship between the primary domain and the trusted domain failed.
This indicates a communication error between the web-server and the DC, however since our application doesn't at all utilizes Windows authentication, I don't see why it needs to communicate with the DC.
This is my implementation:
[code]...
EDIT:
I was finally enable to reproduce this error on my dev-machine (i revoked my machine from the DC yesterday, but didn't reproduce it until today)
HttpContext.User is actually a WindowsPrincipal by default it seems, and the error in my code was that I only replace it with CustomPrincipal upon login. Hence, unathenticated users still get the WindowsPrincipal which then fails horribly if you have trust issues on your AD.
I tried changing the default principal by invoking this on appstart
AppDomain.CurrentDomain.SetPrincipalPolicy( PrincipalPolicy.NoPrincipal);
But this doesn't seem to kick in. How do I change the default Principal in ASP.NET?
Im returning the username from sharepoint site as a string. This is done successfully with the below code but I also get the domain with it. How can I only return the username and not the domain either through sharepoint or programmatically removing it? domain/username
[Code]....
My feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 2 RepliesI have two domain servers X and Y.My Asp.net Web application is hosted on Domain X.But my scope is required to authorize the user of Domain Y on the Web application hosted on Domain X server.I am using Windows Authetication mode in application
View 2 RepliesI have a main domain "mydomain.com" and then a sub domain "forums.mydomain.com". If a user visits "forums.mydomain.com" without being logged in, they are redirected to "mydomain.com/login.aspx".
The two scenarios are:
If they are redirected to the login page with "mydomain.com/login.aspx?ReturnUrl=http://forums.mydomain.com", then they are succesfully logged into the forums but NOT the main site.
If they are simply redirected to the login page with "mydomain.com/login.aspx" with no returnUrl, they are correctly logged into both the main site and the forums.
I have a domain: http://www.mydomain.com. This domain is redirected to http://mydomain.anotherDomain.com.
I user forms authorization, so when the user navigates to Default.aspx he is redirected to Login.aspx. Pretty standard stuff.
On FireFox the user can log in on both on http://www.mydomain.com and http://mydomain.anotherDomain.com.
But with Explorer http://www.mydomain.com doesn't work. I only get the Login.aspx page.
Can it have anything to do with that on http://www.mydomain.com I can't see the filename ('Default.aspx', 'Login.aspx')? How can I enable so the filename is included in the redirected domain?
I have an intranet web application. There are 2 user groups, group A belongs to the domain and group B does not. If I set the IIS to enable anonymous access, Request.ServerVariables("LOGON_USER") always return nothing. If I disable anonymous access and set Integrated Windows authenication, a Windows login prompt will come up if group B's users want to access the website.
How can I setup IIS so that when domain user access the website, it will direct to the main page with Session("user_name") = Request.ServerVariables("LOGON_USER"). If a user is not a domain user, the website will direct him/her to a login.aspx instead of having the Windows authenication prompt, then set Session("user_name") = txtUserName.Text, and finally redirect to the website main page ?
is it possible to remove Main Domain cookie from Sub Domain ?I am using single sign on .On logout i want to remove the maindomain cookie
View 2 RepliesWe have a website for our company on one domain and we have a login form to a webmail solution on another domain.Now i would like to build a form on our website the transfers the request to the login form on the webmail domain and automatically validate the user if user and pass are correct.Need help to find the correct way of doing this. The domains is hosted by our company, the website and webmail is on different servers. I don't want to use the querystring,
View 3 RepliesWhen I turn on Code Coverage in my test settings, on a project that references the Unity DI container I get the following error:
Cannot initialize the ASP.NET project'{Project Name}'.
The event log specifies the following reason:
Could not load file or assembly 'Microsoft.Practices.Unity, Version=2.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name signature could not be verified.
could i use the begin request of Global.asax to redirect everything, from mydomain. domain to www.mydomain.domain?
View 1 RepliesWe're doing a whitelabelled version of our site, which will be hosted at foo.ourdomain.com.
However we need to ensure session is maintained between www.ourdomain.com and foo.ourdomain.com, as our SSL certificate only covers the main domain.
In practice this means we'll swap to the main domain on our payment pages, which run HTTPS, and then redirect back to the subdomain, after payment.
So the question is: How do we maintain the session when doing so ?
I've tried with <httpCookies domain=".ourdomain.com" /> in web.config to no avail :-(
Edit: Figured it out now, I lacked domain on my <forms /> tag to handle login properly.
I've got an Search Engine Optimisation problem where users are able to access my site by specifying any sub-domain. This is causing duplicate page issues with SEO.For example if a user mis-types 'www' then posts a link on a forum, google is crawling 'wwww.domain.com'. Furthermore, google is also crawling 'domain.com'.I need a way of forcing the site to always redirect to 'www.domain.com' regardless of how the user accesses the site.
View 4 RepliesOn the Timelog page, I want to put 2 dropdown list: 1 Manufacturing Project, 1 Engineer Project. However, users can choose either Manufacturing project dropdown or Engineer project dropdown (not both).
View 4 Replies