Has anyone ran into problems using masterpages and inserting data into sql? I have ran into this numerous times where I will set up a page using a masterpage, through a few controls on the page to insert data say from a datagrid, do an insert and the data never inserts.
Then I will change the page to a regular webform page, nothing differnet other than it's not using the masterpage, and wala, the data gets inserted?
Is it possible to convert / migrate Sharepoint Masterpages to ASP.NET Masterpages ?
View 1 RepliesIs it possible to convert / migrate Sharepoint Masterpages to ASP.NET Masterpages ?
View 2 RepliesI am new to Masterpages and thought I would set up some buttons on the left and right side of a masterpage and leave the center open for a ContentPlaceHolder for the stuff I would do in other pages.Is this possible?
View 2 Repliesi want to know what is purpose of using masterpage?
View 5 RepliesWhile I know that Masterpages changes the id of the elements, and need to use:
[Code]....
Notice that while I can access the name of the parent <span />, the child element <input /> has the name changed away from the parent. This is a radiobuttonlist and I'm trying to deselect it, but the page is inside the MasterPage.
I have a master page, in which i have added 4 content templates.
[Code]....
In the content page( for example in the "MainContent"), I have used code as:
[Code]....
When I run the start page, I am able to see the calendar and editor, but the header and footer are not visible. I have header and footer content also defined in seperate pages.
And also, when i click on the calendar to move the months, i am getting a javascript error as "Sys is Undefined".
How to view the proper page? How to make the master page, which will have left menu, header,main content and footer?
Im looking for a way to add a naviagtion webpart to multiple pages via the catalog part - without using masterpages.
View 3 RepliesI using Masterpages and user defined controls, on my user defined control I added a CalenderExtender, but I can get it to work, when I set the TargetControlID="txtPSD" the name of my textbox it vanishes from the screen. Question is am I putting it in the wrong place??? see the bold code below, TargetControlID error is name contains uppercase lettter that are not allowed.
[Code]....
Is there a way to add the same webpart to multiple pages across a site (using shared personalisation) without the use of masterpages?
View 5 RepliesThis is my treeview code. when i enter through orderentryhome page i want to invisible savedordermenu and checkout menu. If i click submit button in organizationdetails.aspx page then savedordermenu and checkoutmenu will diaplay along with other menus. This is my requirement.
<asp:TreeView ID="trvMaster" runat="server" ForeColor="#E9CF24" Width="157px"
ExpandDepth="2" ShowLines="True">
<Nodes>
<asp:TreeNode Text="File Maintanence" Value="File Maintanence">
<asp:TreeNode Text="Organization" NavigateUrl="~/FileMaintenance/frm_vieworganization.aspx"
Value="Organization"></asp:TreeNode>
<asp:TreeNode Text="Vendor" NavigateUrl="~/FileMaintenance/frm_ViewVendors.aspx"
Value="Vendor"></asp:TreeNode>
<asp:TreeNode Text="Items" NavigateUrl="~/FileMaintenance/frm_Items.aspx" Value="Items">
</asp:TreeNode>
</asp:TreeNode>
<asp:TreeNode Text="Order Entry" Value="Order Entry">
<asp:TreeNode Text="Organization List" NavigateUrl="~/OrderEntry/frm_OrganizationDetails.aspx"
Value="Organization List"></asp:TreeNode>
<asp:TreeNode Text="Saved orders" NavigateUrl="~/OrderEntry/frm_savedorder.aspx"
Value="Saved Orders"></asp:TreeNode>
<asp:TreeNode Text="Order Entry" NavigateUrl="~/OrderEntry/frm_OrderEntry.aspx" Value="Order Entry">
</asp:TreeNode>
<asp:TreeNode NavigateUrl="~/OrderEntry/frm_Deliveries.aspx" Text="Deliveries" Value="Deliveries">
</asp:TreeNode>
<asp:TreeNode NavigateUrl="~/OrderEntry/frm_Shortout.aspx" Text="ShortOut" Value="ShortOut">
</asp:TreeNode>
<%-- <asp:TreeNode NavigateUrl="~/OrderEntry/OrderEntryHome.aspx"
Text="Order Entry Home" Value="Order Entry Home"></asp:TreeNode>--%>
<asp:TreeNode NavigateUrl="~/OrderEntry/CheckOut.aspx" Text="Checkout" Value="Checkout">
</asp:TreeNode>
</asp:TreeNode>
<asp:TreeNode Text="Draft Bids" Value="Draft Bids"></asp:TreeNode>
</Nodes>
</asp:TreeView>
I got one masterpage and one content / child page having gridview control .I want to do client side validations using javascript, can anyone suggest me where i have to do this.i.e.., either in masterpage or in content page(I know that only at the <head> tags we can include javascript file, but in content pages there are no html tags,i don't want to use server side validation controls , and i want to validate the server side controls in gridview
View 2 RepliesI have a website that serves all its pages using a single 404 page. it displays hotel profiles form business and depending on different profile levels offers more or less functionality and information.
Through the DB a masterpage is selected and usercontrols are applyed to that.
I have a contact page like this : 404.aspx > masterpage.Master > contact.ascx
My form action looks like this default.aspx?404%3bhttp%3a%2f%2fwww1.testsite.co.uk%3a80%2fcontactus
and when I click the button this where I send up with an error "Validation of viewstate MAC failed" error.
I have read stuff on these for 4 hours but still have no idea where to start.
Do I need to
Catch the form action URL (postback URL) in the baseclass and change it back to [URL] - If I do this are the form firled values still intact
Do i need to do something to change the form.action url before the page is built, if so is this done in the masterpage preinit event as this is what the form tag is
What I know works is that the usercontrol is aware of the postback, but not the form values.
I want to be able to add a 404 based contact us form on any one of 1000s of profiles and be able to catch the values. Idearly I would like to do this in the codebehind of the usercontrol as this keeps the code seperate
I am sure this must be possible and normally I can work stuff out, but here I am totally stuck. I am trying to do this in VB.
I am using ASP.NET3.5, I want to Add rows dynamically to a table.I have written this code.This code is working fine if the Page is not having masterPage file. If I use masterpagefile in my ASPX age,controls(textboxes) are displaying at bottom of the page,and the data in textboxes is not retaining after click on Add button.Disaapering the text box values. My .Aspx:
[Code]....
How do you add a PayPal button inside of a content detail of a master page. Since a MasterPage automatically encapsulates and nests ALL of the code of its contentplaceholder, by definition...all design and coding in a contentplaceholder cannot encorporate a form. This is true because w3 specs do not allow the nesting for forms.
[Code]....
I am going to change an image, based on the incoming URL. So lets say, I have an image control named "specialImg", and 5 images I want to load based on the incoming URL.
Using C#, how do I accomplish the following?
User clicks a link and the URL is categoryproduct1, and when the page loades, I want this "specialImg" control to show the product1 image (it would read in the incoming URL and based on the name, change the image). If the user then goes to categoryproduct2, when the page loads, I want the "specialImg" control to display product2 image.. and so on.
I set the image control to runat="server", I guess I need to find out how to reference it by C# on page load.
So I have a couple of Masterpages as base templates and a couple of themes that can be applied to either one of these masterpages. Using profiles, global.asax and some code behind I can change the Themes dynamically but they are associated with the profile. In other words, once the user logs off, the theme is changed back to default.
My objective is to use an Admin page to
1. change the theme of the site permanently for all users, including anonymous visitors.
2. change the masterpage for all pages permanently for all users, including anonymous visitors.
So when I log off after changing the settings, the new settings are retained.
i am having problem to insert data in database from data list view...I want that when i click on download hyperlink, the file that has been downloaded and all its other related information must get save in the database
Below I am providing my code. ..when i use the below code..all the files that are show in data list view get stored in the database along with the one that i have clicked...i am biniding data to data list view of other database/table and i want to store the file info that i have downloaded into another database/table..CODE IS...
public void DataList1_ItemBound(Object sender, DataListItemEventArgs e)
{
if (e.Item.ItemType == ListItemType.Item || e.Item.ItemType == ListItemType.AlternatingItem) [code]....
I am using an ObjectDataSource in my FormView for INSERT.
Data inserts correctly to my backend SQL table, however as i am posting back a success/fail message to the same page, i have noticed that after a successful INSERT if it hit the Refresh button the INSERT is doubled up.
How can i stop a user pressing the Refresh button and doubling the INSERT?
Is there a setting somewhere or can i stop this programmatically within my ObjectDataSource_Inserting method perhaps?
I have a web page with a gridview & formview (master/detail relationship) combo. On page load the gridview shows all records from a SQL table. On my page I have a button that when clicked shows the formview in Insert mode to allow users to add a new record to the data. I have also added a column to my gridview that has a link. When a user clicks this link it hides the gridview and shows the formview in edit mode with the detail from the record selected from the gridview.
In my formview I am using a listbox control to allow users to select multiple values. The choices in the listbox are populated by a SQL data table. I have successfully written code to post the selected listbox values to my SQL data field during Insert. When the user selects a record to edit I have code in the databound event to select values in the listbox from the choices based on the value in the sql data field. This works as well. My problem is that I cannot figure out the correct code to update my SqL data when a user is editing the record and makes changes to the selected listbox value. I have included my design code for my listbox in my formview edittemplate and also my behind code that I have attempted.
<td
style="width: 454px">
<asp:ListBox
ID="lbox_ConstructionType"
runat="server"
DataSourceID="SqlDataConstructionTypes"
DataTextField="Construction_Type"
DataValueField="Construction_Type"
SelectionMode="Multiple"
Width="144px"></asp:ListBox>
<asp:TextBox
ID="tbox_Ctype"
runat="server"
Text='<%# Bind("ConstructionTypeID") %>'></asp:TextBox></td>
[Code]....
bjdtrw["companyname"] = name1;
bjdtrw["address1"] = ad1;
bjdtrw["address2"] = ad2;
[code]...
I am using a formview to show data, with edit, insert and delete enabled. My problem is with the insert.When i click the insert, the formview changes fine to the template for inserting new data, the problem is it was allowing the user to insert the ID themselves, I have made this readonly, but how would i go about ensuring the ID key is made the next number in line? and that it is printed to this textbox?
View 1 RepliesOn BtnClick, I am inserting all data from my RADGRID into my SQL database. But it was just inserting 'zeros' for all records. what i am missing in the code. My code is below.
[Code]....
I have two formviews and two datasources on a page.
The first shows data from datasource 1 in various labels.
The second shows only a 'new' button to switch to insert mode.
On the seconds insertmode, id like the data in textbox1 to be already filled with data shown in the first formviews label1 (or [id] from sqldatasource1 if thats better?)
i need to insert 160 parameters to my database table through Stored procedure. is there any good and best way of inserting values into Table rather than crating 160 parameters on stored procedure and assigning values to the parameters in the c# code? please help me to achieve my need.Note : I have 160 columns in my table . Also what is the way to avoid creating 160 params in the stored procedure.i have all the 160 values in 160 properties of class file.
View 2 Replies
