i just want the RadioButtonList without the radio button on it, i will code the rbl so that selected items have a different background color and make it look more professional, the radio buttons themselves i want to be able to get rid of in terms of appearance...
View 13 Replieshow can i set the same horizontal level between text and radio button to radiobuttonlist.
the text horizontal level always lower than radio button.
I want to present a list of delivery options to end users which will be in 3 columns - service description, radio button (to select) and then the price of the service. Also I want to auto postback when the user selects a service from the appropriate radio button - e.g. :
[code]....
I have set this up using a repeater control and stand alone radio button, plus literals to display the text elements all within a tabular structure which looks OK. I have actually overcome the issue where by default you can select all radio buttons using the prescribed javascript fixes I found when searching. This way offers me control over the formatting which is important.
However it does not seem that intuitive to pickup the selected value of the radio button this way, especially with the auto postback - I am having issues trying to access the selected radio button to interpret what the user wants.
It would seem much more appropriate for a RadioButtonList but I can't work out how to override the default formatting, and also how to insert extra table columns for the price etc to keep it all nicely formatted.
So either I need to crack the interpretation of the current setup or to find out is there a way to hijack the default setup of the RadioButtonList?
I'm at my wit's end when it comes to this. JavaScript definitely isn't my strong suit and I've been trying to google for a solution. Here's the code I have:
[Code]....
What I want to do is whenever you click a radio button on the Group1Most RadionButtonList, it will disable the corresponding radio button on the Group1Least RadioButtonList. The problem is I can't figure out how to select an individual radio button within the RadioButtonList.
I have an "articles" page that holds a radiobutton list and a textarea. when the user selects a radio button, the text area is populated. now the users wants to be able to point to an article via a url link. (everything is dynamic and being pulled from a db source)
by using a 3 party tool i was able to grab the exact http request (below) that will link to the users' selection. the problem is the url is extremely long. is there another way to link to the radio button selection? that way i can just modify the query string to fit a specific format.
[code]....
I'm attempting to display the answers in a certain survey, exactly as the surveyed person viewed the original survey. However, when viewing, I don't want the browser to allow changing of the selected options in a RadioButtonList. Is there a way to make a RadioButtonList read-only, without using radioButtonList1.Enabled = false?
I've tried subclassing RadioButtonList and adding a Fixed attribute to it that only allows changing of the selected value whenever Fixed = false, but it doesn't prevent the user from changing the values; it only reverts it to the original value if the RadioButtonList has AutoPostBack = true, and I want to avoid using postbacks at all.
I've considered using the graphics for a selected/unselected radio button and coding it up as pure HTML, string and bale wire.
On my web form, I have a RadioButtonList as follows:
Select a radio button when page loads based on RadioButtonList's DataSource
I've two radio buttons in my web site for selecting sex, one s for Male & another s for Female, Problem is during the Run time, I was able to select both the Radio Buttons, but as per my need i should select only one radio button. And i should perform validation Wn user not selected even one radio button i should show the error msg, like " select sex "
View 8 Replies[Code]....
VB.Net
[Code]....
RadioButtonList, Gridview, TemplateColumn, get selected radio value in VB
I'm trying to implement accessibility (keyboard only) ability on my site, but I'm having problems with Radio Button lists. When using radiobuttonlists, when initially, none of the radio buttons is selected, I am able to tab through every single value and select one upon hitting "enter". However, after a value is selected, I can only tab to the selected values, which presents a problem if I want to change the selected value.
From what I understand, radio buttons are grouped at the container controller level, thus when it is considered a group, only one can be selected at a time.
i have a table which looks something like the following
<table id="Table1" border="0">
<tr>
<td><b>1.</b> Question 1</td>[code]....
how do i go about looping through each group of radio buttons and getting the text of the selected radio button ?the code displayed above is created dynamically ... in my aspx file i have the following code
<asp:Table ID="Table1" runat="server">
</asp:Table>
Using jQuery I want to be able to click an element which will also checks it's related radio button. I had this working fine until we had to add runat="server" to the radio buttons.When I apply this it prevents my jQuery function from working how to get round it, heres a simplified version of the code:HTML
<input type="radio" runat="server" id="sector1Radio" name="SectorGroup" title="Sector1" />
jQuery
$('#SomethingElse').click(function() {
$('input[title=Sector1]').attr('checked','checked');
});
I've found out that when its converted to a .net control instead of checked="checked" (as it would be usually) it is just Checked, so I changed that but on inspecting the DOM in multiple browsers, none of my radio buttons are being checked(Are there any other ways I can use jQuery to check a radio button that has runat="server"?
I have a web application that shows a page containing between 6 and 20 AJAX UpdatePanels, contained with Custom Web (.ascx) Controls.
You can see an example of such a page here:
[URL]
The problem I'm getting is that when the user FIRST clicks any of the radio-buttons on any of the controls in the page, ALL the radio buttons that have an active selection ALSO fire an rb_CheckChanged event (see application log below). On subsequent radio-button
clicks, only that RB fires the event (as expected).
This behaviour is having a dramatic impact on performance. The page loads quickly, and a "normal" RB click provides an AJAX update correctly within 1 second. The problematic first RB click, however, takes up to SIX seconds to process, which is unacceptable from a user experience standpoint.
Developed in VS.NET 2008, ASP.NET 3.5. Also I converted the "Web Site" solution to a "Web Application" (pre-compiled) and got the same performance (still too slow). Release builds run only marginally faster than debug builds.
Why would a single RB selection change cause all RB's that have a "selection" set on them to also fire? (The "selection" is determined through database settings every time the control is populated, which is called from within the parent page control's Page_Load function. This selection is determined also at first page load, since all the controls get populated then, so why would the clicking of an RB cause them all to fire an event, and only once? That's what I don't get...)
Not sure if this is an AJAX issue, or general ASP.NET UI issue, so I'm posting in two forums on this one.
I have the following code<asp:RadioButton runat="server" Text="Male"></asp:RadioButton>I want a gap between the radio button and the radio button text, I made the following changes in the text field(prefixed a space) Text=" Male". However, I don't feel this is the most efficient way.
View 1 RepliesI have 3 tabs with 3 seperate gridview and radios buttons in them. Each page has a seperate submit button, but for some reason each pages submit button is validating all the radio buttons on each tab, i picked the seperate controls to validate under but on any submit theya re all validated instead of just the ones on that tab.
[Code]....
I have a databound Gridview (with a LINQ datasource). The gridview displays questions from the SQL DB to the user. I've inserted a radio button list into the gridview with 3 horizontal radio buttons with fixed values of 1,2,3 for the user to select. I have a question ID, a tempuserID, and AnswerValue columns set up in the database. It all works nicely.
After the user selects radio buttons, I would like for them to push a button to submit the QuestionID, the associated Radio Button Value (AnswerValue) and their tempUserID into the DB. How do I do this? I'm not sure what to do next and what VB/LINQ code to put in the code behind file in the button click event handler. I'm also not sure on what to use for the tempUserID, can I use the sessionID? I'm using VB and here's my code:
[Code]....
I'm trying to calculate the circumference and area of a circle when the diameter is entered by the user,I need the page to include a text box control to enter the diameter in, a button to post back the page and perform the necessary calculations on its on_click event and two label controls to display the results,with them rounded to two decimal places,
View 1 Repliesi have a web page in which i place radio button list, when i select any radio button, on printing i get light color for selected radio button, how i get selected radio button dark colour so that it can visible easily..
View 13 RepliesI have a requirement that generate radio button dynamically in the code behind view.
While i am giving the id value of the radio button it will generate automatic id value like this
"ctl00_cphContent_rbVeryPoor5_1" But i am setting only "rbVeryPoor5_1" (while i am viewing in the view source)
[Code]....
[Code]....
I have some radiobutton in my page that users can checked.I want when users select radiobutton they can deselected them now they can just select radiobutton i want do some thing like checkbox that users can checked it and if they didn't want they can deselected them.
View 1 RepliesI want to show my database records in circle. If i use grid view or data grid or datalist then records will show in table structure. I want to show dynamic records in circle not as like forum view.
View 9 Repliesbelow is my code
<form id="form1" runat="server">
<div>
<table>
<tr>
<td style="width:100%;"> [code]...
if you see the UI, the radiobuttonlist display in a first line and the button displays bottom of that Radiobuttonlist, i want to display the button right side of the radiobuttonlist, how to do this?
I have problem when resetting the radio button.
3 radio buttons with search option and a reset button.
When clicking reset buttion , I will select the first radion button and reset the system. But the functionality is working based on the first radio button, but its not checked. It is checked in the previous state. check in the below website.
[URL]
Click on "Add stuff" , Then search widgets , here you can see the section what i said before. click on the search , you can see the list of widgets and select the "My widgets" and click search , you can see "No widgets found"... now when you click the reset button you can see the list of widgets which are related to the first "All Widgets" radio button,but the radio button is still in the previous state even though i set Allwidgets.checked = true; May i know why its not working?
I Have few radio buttons which are grouped together, and i want to reterive their values.But i am not sure how can i do that.
View 2 RepliesMy web page has one radio button and three sub radio buttons. When I click on Main Radio button, I am enabling the sub radio button using Javascript, and user can select the options. Now the problem is, when I click on submit on this page, I am unable to get the selected radio button. i.e., Suppose if I select 1st sub radio button and click on submit. I am checking in the code for sub radio button selection, I am getting no radio buttons are selected. The above condition is for first time only. Now go to another page and traverse to the page again, I am successful, i.e., I am getting the selections properly.
View 8 Replies