I set debug=true in web.config file but once app got error only display general error message. I have to run app in web server to get error detail.
How to make error detail in client site so that I can read error detail?
I set debug=true in web.config file but once app got error only display general error message. I have to run app in web server to get error detail.
How to make error detail in client site so that I can read error detail?
I'm trying to setup is a News module with article listing paging and article detail paging. I have a GridView with paging that lists my articles just fine. In that list, some article titles have links that direct to an article detail page by passing in the articleID to the details page. I was able to setup my details page, which uses a DetailsView control, to use paging by using an ObjectDataSource with pageIndex and pageSize parameters from the querystring. Once on my detail page, I can use my navigation arrows to move through Next and Previous articles just fine.
No matter which article I click in my article list, my detail page always starts with pageIndex 0 and thus not the article I clicked on. I understand why that is because it's going by pageIndex value instead of articleID. What I need it to do is, set the detail to whatever articleID i pass in, then allow me to navigate Next and Previous to THAT particular article instead of starting me off from pageIndex 0.
[Code]....
I have an "Edit" page that uses a FormView bound to an EntityDataSource. The page is called with the ID field of the record to edit in the query string: "EditEmployee.aspx?ID=10". The EDS the FormView is bound to is using: AutoGenerateWhereClause=true and a QueryStringParameter. Below the FormView I have a ListView that contains some child records of the FormView. The ListView is bound to a seperate EDS and also uses the (same) QueryStringParameter.
The problem I am having is when this ListView attempts to Insert or Edt a column I receive an error because I don't have the ID field (EmployeeID) of the parent bound anywhere in the ListView (and obviously, it is setup as a ForeignKey so it fails, like it should). Any advice on the best way to get this ID (EmployeeID) column bound in the ListView? There are many things I can do in code behind, but I would like to solve this in the markup if possible. I can move the ListView so that it is inside of the FormView if necessary.
article on binding to a list and I've got that working fine on one view. But what I'm stuck when doing it off a master record. Everything seems to work except that when I look in the database the detail records previous associated with the current master have their Foriegn key to master set to Null and a new set of detail records have been inserted. I've got a really simple form for this object
[Code]....
The form collection comes back with the expected prefixes:
[Code]....
And the Controller.UpdateModel(master) binds all the properties correctly. But when I call dbContext.SaveChanges it issues the follow sql from sql profiler (psuedo code)
[Code]....
I've got a work around that works but it's pretty hackish and I'm currently not matching up the keys so it's dependent on everything coming back in the right order. Plus I've got to include all the fields that I want updated.
[Code]....
I thought that entity framework's code first was the culprite but I've unit test that and it works fine. I've got a feeling that UpdateModel is somehow removing and re-adding the children. Has anyone else got this to work? Of course, I could throw in the towel and parse the indexed field names myself, but I'm so close!
How can I read a file from client's pc? I found out that it required to upload the file to server and read it from the server, what if I want to read it directly from client's pc, can I do that
View 4 RepliesI've been experimenting with using EF (asp.net 3.5 sp1) with a master detail page. Using northwind as the database, I'm simply trying to have categories as master and products as detail. I have read everything I could find on the net about the where condition and it still fails with this error as soon as I click the select link in the master grid:
Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerServerErrorException: A property with name 'CategoryID' does not exist in metadata for entity type 'WebAppEF01.Products'.
What strikes me is that the CategoryID column is not exposed by the EF model. That's been rolled up into the navigation element 'Categories' I suppose...but on the surface this seems to create the problem I've running in to. I've tried turning off the autogeneratewhere clause but didn't have success. The code for this page follows below.
[Code]....
I have a treeview which showcheckbox=true, when the checkbox is ticked I need to run a js function on client side and read the value of the checkbox
I set the treeNode1.value=i
In IE, I can get the value of each check box (which is i...)
but in chrome, firefox and safari, the value is always "On"
I have developed an application where I need to create a page to read data from Excel File and then update it to the database. The code that I wrote works only when the application runs from my machine. When I deployed the application to the server it gave an error- 'C:PRFileIimport_File.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. here is mu code -
protected void InsertData(object sender, EventArgs e)
{
OleDbConnection oConn = new OleDbConnection
(@"Provider=Microsoft.Jet.OLEDB.4.0; Data Source=C:\PuertoRicoFile\Puertorico_Iimport_File.xls ; Extended Properties=Excel 8.0 ");
OleDbCommand oCmd = new OleDbCommand("select * from [Puertorico_Data$]", oConn);
oConn.Open(); //Here [Puertorico_Data$] is the name of the sheet in the Excel file where the data is present
OleDbDataReader oleDbReader = oCmd.ExecuteReader();
string AgentIP = "";
string TagName = "";
string Status = "";
string Severity = "";
int EventCount = 0;
string EarliestEvent = "";
string LatestEvent = "";
while (oleDbReader.Read())
{
AgentIP = (string)oleDbReader[0]; // valid(oleDbReader, 0);//Here we are calling the valid method
TagName = (string)oleDbReader[1]; //valid(oleDbReader, 1);
Status = (string)oleDbReader[2]; //valid(oleDbReader, 2);
Severity = (string)oleDbReader[3]; //valid(oleDbReader, 3);
EventCount = Convert.ToInt32(oleDbReader[4]); //oleDbReader[0]; //valid(oleDbReader, 4);
EarliestEvent = (string)oleDbReader[8]; //validate(oleDbReader, 8);
EarliestEvent = EarliestEvent.Substring(0, 19);
LatestEvent = (string)oleDbReader[9]; //validate(oleDbReader, 9);
LatestEvent = EarliestEvent.Substring(0, 19);
InsertDataIntoSql(AgentIP, TagName, Status, Severity, EventCount, EarliestEvent, LatestEvent);
}
SqlConnection mySQLconnection = new SqlConnection(ConfigurationManager.ConnectionStrings["IssNetworkReportingSystemConnString"].ConnectionString);
mySQLconnection.Open();
SqlCommand cmdSql = new SqlCommand("AddMonth_Event_TotalInfo_for_Puertorico", mySQLconnection);
cmdSql.CommandType = CommandType.StoredProcedure;
dbReader = cmdSql.ExecuteReader();
dbReader.Close();
cmdSql = new SqlCommand("AddQtr_Event_TotalInfo_for_Puertorico", mySQLconnection);
cmdSql.CommandType = CommandType.StoredProcedure;
dbReader = cmdSql.ExecuteReader();
dbReader.Close();
oConn.Close();
lblMsg.Text = "Data Imported Sucessfully";
lblMsg.ForeColor = System.Drawing.Color.Green;
}
public void InsertDataIntoSql(string agentIP, string tagName,
string Stat,string severity,int eventCount, string eEvent, string lEvent)
{//inserting data into the Sql Server
SqlConnection mySQLconnection = new SqlConnection(ConfigurationManager.ConnectionStrings["IssNetworkReportingSystemConnString"].ConnectionString);
mySQLconnection.Open();
SqlCommand sqlSelect = new SqlCommand("SELECT SeverityID from Severity where SeverityDesc=@SeverityDesc",mySQLconnection);
sqlSelect.CommandType = CommandType.Text;
sqlSelect.Parameters.Add("@SeverityDesc", SqlDbType.NVarChar).Value = severity;
dbReader = sqlSelect.ExecuteReader();
int severityId = Convert.ToInt32(dbReader.Read());
dbReader.Close();
SqlCommand sqlInsert = new SqlCommand("Insert into IdsData_Puertorico(AgentIP,TagName,Status,SeverityID,EventCount,EarliestEvent,LatestEvent)" +
" values (@AgentIP,@TagName,@Status,@SeverityID,@EventCount,@EarliestEvent,@LatestEvent )" ,mySQLconnection);
sqlInsert.CommandTimeout = 0; //timeout unlimited
sqlInsert.CommandType = CommandType.Text;
sqlInsert.Parameters.Add("@AgentIP", SqlDbType.NVarChar).Value = agentIP;
sqlInsert.Parameters.Add("@TagName", SqlDbType.NVarChar).Value = tagName;
sqlInsert.Parameters.Add("@Status", SqlDbType.NVarChar).Value = Stat;
sqlInsert.Parameters.Add("@SeverityID", SqlDbType.Int).Value = Convert.ToInt32(severityId);
sqlInsert.Parameters.Add("@EventCount", SqlDbType.Int).Value = Convert.ToInt32(eventCount);
sqlInsert.Parameters.Add("@EarliestEvent", SqlDbType.DateTime).Value = DateTime.Parse(eEvent);
sqlInsert.Parameters.Add("@LatestEvent", SqlDbType.DateTime).Value = DateTime.Parse(lEvent);
sqlInsert.CommandType = CommandType.Text;
sqlInsert.ExecuteNonQuery();
mySQLconnection.Close();
}
I have to read a client side ini file in Aspx page and use that data in server side processing. refer to a link or any sample if possible.
View 6 RepliesThis is my main page in which I have collapsible panel and my phone gridview is contained in it. The Initial page loads up properly and shows the gridview. All the errors happen when I select a gridview row for modal popup edit. I get the following errors one after other after ignoring each one of them. I have been struggling with his for almost a week. Following are the sections of the main page and the code in the gridview ascx control. Main GridView User Control Page.
[Code]....
I have a Page with a FileUpload control on the top with the "Insert" button, in order to insert pictures Below that, i have a Listview showing all the pics. THis is the way i am placing my Update Panel:
[Code]....
How can i, press the INSERT button and reloads only the Content Template after INSERTING?
I have to read the first couple of lines of a csv file client side to present the user with a preview before uploading a large file.
I'm using c# with ASP.Net (VS2010)
Does anyone know how this can be done? Also that it works in all browsers!?!
(It's not possible to use activeX or so, we do not want our clients to install something!)
I have a project of ASP.NET which is a Customer satisfaction Survey, i need to to incorporate the option selected by customer with the a client side text file which i located at the client machine, read a text file on client or should i develop the survey application as window application.
View 7 RepliesI am working in coordination with the pHp developer, he is sending me some username, key at my aspx page and on that basis i am checking the authenticity from the DB, if authentic user then i'll do response.write("YES"), if not then i'll do response.write("NO"). The PHP developer saying that he will read my response.write and on that basis he will allow the user to get logged in to his PHP site. i want to know how will he read My response.write from ASPX page. He was saying he will read it, and will put it in session, i am very confused how will he read my response.write.
View 1 RepliesI don't think the site has a web service available, so I need to pass the login credentials and read the xml file (e.g.https://www.somesite.com/needthisfile.xml). What do I use to do this?
View 1 RepliesI have the basic Master / Detail Views working great with the default ASP.NET MVC Route; however I would like to build some URLs like this: /Class/Details/5 -- General Detail view [Working] What I'm not sure about (and I'm not tied to this URL format, just something roughly equalivent.)
/Class/5/Details/Logs -- Detail View with Logs
/Class/5/Details/Status -- Detail View with current Status
Another way to put this, is like this: /{controller}/{id}/{controllerSpecificMaster}/{action}/ What I'm trying to avoid, is cluttering up my ViewsClass directory with a bunch of Views, which are all basically derivatives of the Details view. I'm on ASP.NET MVC 1 and .NET 3.5 SP1.
Say on website1 there is a link to website2(asp.net)ites are unlrelated to each other, different servers and different domains.Website1 may even be php.The link on website1 is <a href='http://www.website2.com/default.aspx' >LINK to website2</a>Question: Can I in codebehind in website2/default.aspx read were the link came from, thats is determine it came from www.website1.com, when default.aspx was selected into browser?
View 2 RepliesAnyone know of a way to read out in a list all of the UpdatePanel Client ID's I have on a page? Basically I need to loop through all controls in the page with a type of UpdatePanel, and display the ClientID for each..
I have four update panels on this page and I am using this
private string LoopUpdatePanel(ControlCollection controlCollection)
{
StringBuilder sb = new StringBuilder();
foreach (Control control in controlCollection)
{
if (control is UpdatePanel)
{
sb.Append(((UpdatePanel)control).ClientID + ", ");
}
if (control.Controls != null)
{
LoopUpdatePanel(control.Controls);
}
}
return sb.ToString();
}
is this c# code intended to read local client files?System.IO.FileStream content = System.IO.File.Open("c: est.txt", System.IO.FileMode.Open);It gives me error FILE NOT FOUND
View 2 RepliesServer Error in '/' Application. Attempted to read or write protected memory. This is often an indication that other memory is corrupt.Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[code]....
I've read that OnClick is executed on the server and onClientClick is executed on the client. Is it better to use OnClientClick to do something like close a modal popup?
If my understanding is correct then this would avoid a trip to the server to accomplish the same task. This would be great for something that doesn't need to make a round trip to the server and back.
We just re-worked about a dozen pages in a website we created - changing the masterpage - adding lots more CSS - changes to images and so on.
The production webserver runs this page using HTTPS:
What do I have to do in IIS to create another "website" that can be accessed? Doesn't the certificate refer to the specific site that's named in that cert?
I used PopupControl Extender to display row details from a gridview, and need to update the two textboxes, but the changed value in the textboxes did not get picked up when click the update button on the popup window, so I need to get client side javascript to read the new changed value from these text boxes. However, I tried a few way, none worked for me, not sure what is wrong.
1. Add a javascript function in the .aspx file and use onclientclick of the linkbutton control to call the function, I got error of "Microsoft JScript runtime error: Object required".
<script language="javascript" type="text/javascript">
function newTextValue(textbox)
{
var text = document.getElementById("TextBox1").Value;
alert(text);
}
</script)
<asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("GalleryTemplateName") %>' Height="20px" Width="230px"
style="text-align: left"></asp:TextBox>
<asp:LinkButton ID="LinkButton2" runat="server" Font-Bold="True" CommandArgument='<%# Eval("GalleryTemplateId") %>'
oncommand="LinkButton2_Click" OnClientClick="newTextValue(this)" >Update</asp:LinkButton>
2. Use ScriptManager.RegisterClientScriptBlock in the aspx.cs file, :
ScriptManager.RegisterClientScriptBlock(this, this.GetType(), "changevalue", "alert(document.getElementById('TextBox1').value);", true);
but the alert window did not showup, that means the client javascript did not run? I just use an alert window to test to see if the textbox value is picked up. Note, I used Ajax Toolkit PopupControl Extender, all codes are in an update panel.
This is CSS code
@font-face {
font-family: 'FuturaStdBook';
src: url('site/font-face/futurastd-medium-webfont.eot');
src: local('☺'), url('site/font-face/futurastd-medium-webfont.woff') format('woff'), url('site/font-face/futurastd-medium-webfont.ttf') format('truetype'), url('site/font-face/futurastd-medium-webfont.svg#webfont') format('svg');
font-weight: normal;
font-style: normal;
}
h2 {font-family:'FuturaStdBook', sans-serif}
Can it be related to mime type?
How can i ensure my path is right?