Web Forms :: SSL On Webform, Mixed-content Message?
Aug 11, 2010
We have a webform this is in SSL but it is giving that mixed content message that everything on the page is not covered by SSL. Is this a simple matter of viewing source on the page and tracking down any links that may be pointing to an HTTP site rather than an HTTP site? And if I need these links how do I solve this problem?
View 1 Replies
Similar Messages:
Aug 4, 2010
I have a website that deliveres content from secure source (https://) after the user authenticates. I added a new page where I use an Iframe to display a pdf file. It works fine when I try it from the dev server where I do not get directed from https, but when trying from the actual site I get the error message 'Do you want to view only the webpage content that was delivered securely?' I understand this is because the Iframe source is not secure (the source file is in the root directory of the webpage) Where should I store the content for the Iframe? Can I use a local directory on the server rather than one in the root directory?
View 5 Replies
Dec 8, 2010
I have a site written for ASP.NET using a library written for ASP. The library resides in a dll and the site calls it to get the number of leave days an employee has left from a database. The dll was outsourced so I don't have access to the source.
I've set up the database and visual studio project locally. When I run the site and login to the system, an error message is displayed where the leave days should be displayed but the site runs normally. If I register the dll using regsvr32, the leave days are displayed when I login, but when I try to browse the rest of the site, the session is dropped and I'm automagically logged out. If I deregister the dll, then I can browse the site once I've logged in again but, once again, the error is displayed.
View 1 Replies
Aug 8, 2010
I am trying to make a simple form that is positioned within a contentHolder. The "CommitChange" Function should do a simple action - update a message to the data in the textBoxes in the form. However, though I change the text through input (writing in the textBox txtEmail [URL] for instance), the values stay the same as they were when the page loaded. Why Does the page not update the values in the textBoxes?
Here is the function:
protected void CommitChange(object sender, EventArgs e)
{
ContactMessage messageToUpdate = new ContactMessage(
idToEdit,txtName.Text,txtEmail.Text,txtPhone.Text,txtMsg.Text,DateTime.Now.ToShortDateString(),
int.Parse(DdlStatus.SelectedValue),int.Parse(DdlSubject.SelectedValue),txtAddress.Text,txtCity.Text,
txtMobile.Text,txtInnerText.Text);
BLLContactMessage.updateMessage(messageToUpdate);
lblOutput.Text = "Message Updated";
lblOutput.Visible = true;
}
View 2 Replies
May 7, 2010
I'm getting this message when going to a web app that accesses my service.
"The content type text/html of the response message does not match the content type of the binding (text/xml; charset=utf-8)..."
The thing is, it happens once in a while even when no changes have been made to the service or the web app. And I can make it go away most of the time by going directly to the .svc?wsdl page in my browser and then coming back to the web app.
View 2 Replies
Sep 17, 2013
I am following this article [URL] ....
It's working fine except for zip file. When ever i am attaching zip file in mail, it is giving me error
"Exceeded storage allocation. The server response was: 5.7.0 This message was blocked because its content presents a potential"....
View 1 Replies
Apr 11, 2010
I have managed to send emails with a button click to whomever i specify and whatever content i specify from my website. is there anyway i can make the email and content of the messages dynamic, and make the emails automatic?? on a date (from my database) i would like it to email a certain user some templated message: Congratulations "name", you have won "money" or something like that? Basically on a datetime, pull certain information from the database relating to the one user i am emailing, and send it automatically?
View 2 Replies
Oct 6, 2010
I'm working on an asp.net c# application that sends an email with one attachment.The attachment is a vCalendar file.
Here's the code:
StringBuilder sbCalendar = new StringBuilder();
DateTime dtStart = eventDate;
DateTime dtEnd = eventDate;[code].....
I want to get rid of that text, and display only the contents of my messageBody parameter and have the vCalendar file just attached to the mail message.How can i do this? Is this an outlook issue or a coding issue?
Edit: I'm only interested in displaying the message in Microsoft Outlook. I've looked into the source of the message (in Outlook right click > View Source) and the text i want to get rid of is within the <body></body> html tags of the message)
View 1 Replies
Aug 7, 2010
in a page that i have datagrid i see that if the content of the grid has changed in the meantime then occurs thwe follow message in all browsers(different in every browser)To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier.and then if i click yes resends the last post that was sended
View 32 Replies
Jul 6, 2010
I want to display message content when i click on subject without refreshing the page, what controls i should use, it should like inbox mail, when i click subject messages will hide and aontent will display like that i want.shoould i hide the grid and display the content????// or using i frames should i call???which controld i should use, like update panel, and iframes.if i use iframe any problem.
exactly it should be like mail INBOX.
View 3 Replies
Feb 26, 2010
I am using a server control on a single web.forms page. I have to use this control on a web.forms page since its a server control, although this is actually a MVC project. So I created a web.forms folder and put my new page in it. I then copy the example code from the signature control. I get the following error:
The base class includes the field 'ctrlSign', but its type (WebSignatureCapture.SignatureControl) is not compatible with the type of control (ASP.signaturecapture_signaturecontrol_ctlsignature_ascx).
I know the code works because if I removed the ID attribute from the server control, it no longer gives me this error and my control renders. But I need the attribute for the ID so I can perform is post event
I am using this signature control. Here's the web.forms code...
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Index.aspx.cs" Inherits="KahunaCentralTIDRevamp.SignatureCapture.Index" %> [code]....
View 2 Replies
May 27, 2010
I'm working on a web application. One of my co-workers has written some asp.net forms pages. The page classes all inherit from BasePageClass, which of course inherits from the Page class. I wish to add some MVC controllers that I've been told need to use the same logic implemented in the BasePageClass. Ordinarily, I would want to inherit the functions in the BasePageClass in the controller classes, but this breaks the inheritance heirarchy.
View 1 Replies
Feb 6, 2010
Here is what I am trying to do. I have a page with two link buttons and an updatepanel (the two linkbuttons trigger the updatepanel). I have two usercontrols which have labels with same ID's. When I click the first link button, I add the first usercontrol to the updatepanel and set the label value to datetime.now
if i click the second link button i see that the value of the label from the first control is set in the label in second user control. if the id's are different there is no problem - but in my case the usercontrols are being developed by different teams and I am integrating them in the way i mentioned - so they may have same ids.
View 3 Replies
Nov 4, 2010
I AM Using:
Microsoft Visual Web Developer Express 2010
My Development Server has:
Windows 7 Home Premium 64 Bit
IIS 7.5
ASP.Net 4.0
When I attempt to upload 1 file under 4mb, everything works wonderful When I attempt to upload 1, 2 or 3 files with a total size under 4mb, everything works wonderful When I attempt to upload 1 file, over 4mb or When I attempt to upload 1, 2, or 3 files that total over 4mb, a problem arises! And Continue to read and not assume it's just my Web.Config file, for I did attempt to set the maximum upload size to higher than 4mb, a copy of my Web.Config is included below!
Here is my Problem:
I have a need to upload 3 Files, 1 File being a .jpg file and the other 2 files will be .mp3 files. If I try to upload 1 file that is over 4mb or if the sum of the 3 files is over 4mb, I get a> The Regular Debug Message:
Maximum request length exceeded.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Maximum request length exceeded.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Code].....
View 5 Replies
Oct 19, 2010
in webform 1, i have search button when i click its open webform2 and there the gridview.
I want when i click the link in gridview in webform 2 then it close webform 2 and change the datasource parameter in webform 1 without open the new window (still same window)
View 2 Replies
Mar 21, 2011
What is right way to send visitors from one webform to other. What are their limitations and their plus points.
View 2 Replies
Feb 5, 2010
ASP.NET 3.5 SP 1 Following code in ASPX:
<asp:Button
ID="calcShipping"
UseSubmitBehavior="false"
Text="Calc Shipping Costs"
OnClick="calcShipping_Click"
runat="server"
/>
<asp:Button
ID="submit"
runat="server"
Text="Submit Query"
/>
Renders like this in HTML (I find this to be correct):
<input
type="button"
name="calcShipping"
value="Calc Shipping Costs"
onclick="javascript:__doPostBack('calcShipping','')"
id="calcShipping"
/>
<input
type="submit"
name="submit"
value="Submit Query"
id="submit"
/>...........................
View 2 Replies
Oct 19, 2010
How do you back-door authenticate Windows users into a website using forms authentication running on IIS 7.0?
View 1 Replies
Jan 13, 2011
I have a question about mixed mode authentication. I've been doing some research into this, but I haven't found the answer yet, so I figured I'd just ask:
I have an internal application that requires login. Right now it's using forms-based authentication. We'd like to make it so that, if you're internal and authenticated against Active Directory, you don't need to login to the application. However, if you're coming in from the outside (or don't have an AD account), it would then require them to login via the forms-based Login.aspx page.
From my research, it seems that the only way to do this is to enable forms based auth as the default membership provider, then on the back-end do a check at Page_Load to pull their login name, match it against the .NET membership and then authenticate them automatically - am I wrong on this?
The documents I've found all seem to point to the user having to login anyway, just the login being stored in AD - instead of having the user just login once to their machine in the morning and using that to verify them and their roles in subsequent applications.
View 4 Replies
Aug 24, 2010
I have an ASP.NET application that can be installed with either Forms Authentication or Windows Authentication. All of my customers install using Windows Authentication. I use Forms Authentication in-house as it is easier for me to work with different clients. But enough about that.
I have a module as part of my application for Mobile Users. It displays a very simple HTML interface for low bandwith phones and air cards. It seems that some phones when going to this type of site that is Windows Authentication, it throws an error saying that you aren't authorized to view the page. From a computer, it will ask for credentials.
What I would like to do is use Windows Authentication Or Forms for my Main Application, but in the MOBILE folder, it would be nice if I could use FORMS Authentication. Can I mix the two? Can I just add a Web.Config to the folder for the Mobile Files and put FORMS Authentication?
The only other way I thought of doing this is:
1) create a seperate installable application that is always FORMS Authentication that is not part of the main application. Which sucks, as I now have to manage two applications.
2) In the main Web.Config I can set that folder to have no authentication and it will be avail to anyone, and then enforce my own authentication on the few pages it contains.
View 1 Replies
Mar 3, 2010
I am working on a very basic ASP.Net 2.0 website that will have a backend based on SQL Server 2005. The website has three basic pages (Home, About, and Contact) that are fully viewable by everyone. However, there is a fourth page called "Employee Login" that must present a Login/Password system to the visitor of the page. Upon successful login, a few more pages shall become accessible to authenticated users only.I need the simplest Form based authentication here however; the User Names and their Passwords are going to be coming from the SQL Database. Setting up the authentication to Form simply locks out the whole website. I need the basic pages to be login-free. Only certain pages need a login.
View 3 Replies
Dec 13, 2011
I have the requirement for internal users to acces our web app without loggin in manually so using windows authentication, external users need to be refered to a form based authentication.
Now I have implemented the solution [URL] ....
However I also need to employ roles for authorization. The forms side is all set up but I cannot seem to get it to work for the windows side of things, looking for implementing a mixed mode involving roles?
I tried adding in an extra provider
<providers>
<add name="SqlRoleManager" type="System.Web.Security.SqlRoleProvider" connectionStringName="aspnetdbConnection_dev" applicationName="Corp.Web.GSP"/>
but how to configure it for usse only by the windows users. Secondly if I set it as the default where I have code like
if (Roles.IsUserInRole("Internal") || Roles.IsUserInRole("SysAdmin") || Roles.IsUserInRole("Sales"))
{
I get an
Method is only supported if the user name parameter matches the user name in the current Windows Identity error
<add name="WindowsRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" />
View 5 Replies
Apr 19, 2010
I have forgotte password page in my application,page have one textbox to insert email address,when user click on submit button if inserted email address (i.e. abc@gmail.com) does not exits in DB it will give custome error message like "Email ID not available".after that suppose user will enter inproper email address (aaa#gmail.com) than client side validation for regular expression will file "Email id not valid",at same both message be on screen,now i want only one message at a time.so please can you help me for same
View 2 Replies
Jan 20, 2011
I'm having a tough time implementing mixed-mode authentication (windows & forms based) for my application using IIS 7. Doing it in IIS6 is easy, but the process doesn't translate to 7/7.5 - and my research has led to me to conflicting answers, none of which.
I have redirect page called WindowsLogin.aspx, and a forms-based one called Login.aspx. I'm having difficulty enabling Windows authentication for just WindowsLogin.aspx.
View 1 Replies
Feb 15, 2010
I am working on an application built using ASP.NET 1.1 but that invokes services built in ASP.NET 2.0.
Attempts to debug my code by setting a breakpoint and attaching the w3wp.exe process fail because IIS is running under ASP.NET 2.0.
If I select ASP.NET 1.1 as the version in IIS then debugging works, but the calls to the 2.0 services (which are everywhere) causes the page to crash.
Does anyone have a solution/workaround to this problem?
View 1 Replies