I have several dropdowns on a page that I have named dd1 - dd15. They all have the same data source, so I created a class to get the source and now I need to loop through and load each one. I think I might be close, but could use a push. Here is my class:
[Code]....
Heres my code from my page load event:
[Code]....
I have a webpage used to document work performed on a job. There can be as many as 6 employees for every line of work documented and I have placed 6 ddl's which are all populated with the same list of employees along with 6 text boxes for the hours. I loop through each ddl in the code behind to add the work performed to the server but I'm thinking there must be a better way to do this. I'll add the code for the first two ddl's so you can get an idea of what I need to do.
[Code]....
I am using panel to hide and display certain controls on a page, On one of my panel i have three drop down, all i want is to make sure that user has selected something from the dropdowns otherwise they cant proceed, i am using the requiredfield validator but its just not working
[Code]....
I have 45 dropdown lists in my asp page. There are some methods that I can apply to all of these dropdowns. Is it possible to convert them into an array of dropdowns for ease of use?
View 2 RepliesI have an update panel in a user control and I am adding multiple instances of it for example 5.
When that update panel refreshes the page load occurs 5 times.
How can I prevent it only for once?
In my page I would like to load multiple gridview one by one (with or without update panel). Once the page loads I want gridview one to start loading then the next one load and so for the other gridviews.
While the gridview is loading the gridview should show loading gif.
I have a simple UserControl that I've created that simply allows a user to enter the date. For the time being, it has a single Textbox with ID="tbDate". I am trying to dynamically add this control multiple times via (for example) `placeholder.Controls.Add(LoadControl())` but am receiving the error "An entry with the same key already exists". I could, perhaps, change the ID of the elements but then it would be difficult to grab the value entered by the user.
View 3 Replies am using a master page, with children pages.
I am using forms authentication, and a session object to hold user information once the user is authenticated.
I am able to login and log out. I am able to log in and use the "remember me" functionality of the forms authentication.
When attempting to test the "remember me" functionality, the master page load event contains code to check the forms authentication & remember me, and retrieve user info from the database to automatically log the user in. This fires correctly, and the screens all load with the user successfuly logged in, and the users info is successfully stored in a session object.
Without touching anything on the screen, a moment passes and then the master page load event spontaneously fires again, Page.User.Identity.Name still contains the user name, however the session variable is now null, and throws an error.If I tell it to run past this error, it does, and the application continues to function normally, withthe session variables set correctly.
Its almost as if that second firing is ina different session, or something.
I have no problem posting code, but I have a profile class holding / handling the session communication, etc so it is a bit cumbersome.
provide me the cascading dropdown code upto 3 levels without using the WebService .
View 1 RepliesI have a form in which I have two drop downs. A decision in one fires the other. The basic rule is:
Drop Down A -> select items 1,2 or 3. Drop down B loads list 1
Drop Down A -> select items 4,5 or 6. Drop down B loads list 2
This works fine on first load and save of the form. The problem is when I edit. Lets say I selected and saved item 3 in Drop Down A. On Editing: If I change Drop Down A, the select changed event fires every time I change it except when i reselect what was saved. It leaves me in a situation where I can choose 3 in Drop Down A but are left with the wrong list in Drop Down B as the event doesn't refire on that selection.
I've tried every trick I can think of but I can't seem to get around this issue. (We've tried radiobutton lists and its the same issue. Setting the value in a variable and attempting to reset the control to clear what it thinks the original value is doesn't work either.)
I have figured out how to programmically hide a dropdown on same page and on a different page using a Session when the Dropdownbox im using has a static drop down list. I am, however, having issues with a dropdown that is data bound to a DB for the dropdown list.I have gone over the code many times and that seems to be where my issue lies.
Here is where i set the selected item to a session on one .CS page:
[code]...
I'm currently writing a website with two linked drop downs, when you click one it changes what options can be used in the second one, that's all find and dandy however i need to have the option for an "Any" (*) option in both of them, I did have it working with appenddataitems turned on and "
<
asp:ListItem
Enabled=true
Selected=True
Text="Any"
Value="*"
/>
"
however this causes problems as you click an option in the first dropdown then change it and the second drop down keeps the options for the first selection aswell. Am i going to have to live without the Any option in the second box and put in code if firstbox.text = "Any" then Secondbox.text = "Any" (when it comes to doing the search on the database?)
I am having slight trouble with the menu control on a website which I am developing. In IE 8 the text doesn't appear in the dropdowns. This is intermittent between two different nodes. :S I have added the z-index: 1000; fix, but it doesn't seem to have any effect. The site is currently here: watercress.lukestratton.co.uk , please don't pass the URL around. This is fine in ALL other browsers. I think it may be something to do with my CuFon font conversion scripts.
View 2 RepliesI got a web app linked to a SQL Server 2005. The registration page for learners on this page require a lot of information and many of them are on dropdown controls linked each to their own table adapter. The table adapters are linked to tables within the Database. The dropdowns consist of info like designations, grades, categories, race, etc. The tables like designations changes from day to day as new types of designations are added and the other removed. What will the best way be to add data to the dropdowns? Another way I considered are to have one table and add a field like a type field that distinguish between the dropdown so that I only use one table adapter, or are there a better way. Some Code:
[Code]....
I have three dropdowns, the second one is visible only if first dropdown selection is "Sunshine"
I have a blank space between when the second dropdown visible = false
it is possible to avoid this blank space, between the dropdowns.
I have a sample app below
[Code]....
I have two lines of dropdown menus. There are 3 dropdown in each line (together 6). First dropdown in each line is "independent". The second and third are dependent. If user selects second, page loads and user can then selects item in third. So user have option to select first OR second and third in each line.
.ASPX code:
[Code]....
Since I've found out that you can't validate dropdown controls directly with CustomValidator I've wrote few lines of code for each of dropdowns to insert some values in txtBx_Cln1n2 which will be hidden when the page will be finished.
[Code]....
Unfortunately the code for CustomValidator have some bugs. If user doesn't select anything error message is shown. But if he choose 1 employee and then second and then select (I doubt that anybody will do this but I want to be sure and prevent as much exceptions as possible) the first item in one of the dropdowns ("all employees" or "employees by group") the custom Validator will allow execution of code for link button although the validation code should prevent this.
[Code]....
I know I could this a little better since code is quite complicated if I want to tell the user which employee he/she forget to enter. I've tried instead of SelectedItem.Value also SelectedIndex != 0 but the problems are the same.
I couldn't validate this without the use of textbox. But this method is also making complications since user can select 2 employees and then in one of the selected dropdown change selection to index = 0. Maybe I have to disable viewstate on all dropdowns? But this would probably affect INSERT of data?
I've been trying to figure out the issue and knowone seemd to know. I put a dropdown on my page and when I view it from my server, it works fine. When I tell it to go and get it's values from a DB I can no longer see it on the page when I view it from the server. Here's the code I have for it:
<td
class="style28">
<asp:DropDownList
ID="DropDownList2"
runat="server"
DataSourceID="AccessDataSource1"
DataTextField="Team"
DataValueField="ID">
</asp:DropDownList>
<asp:GridView
ID="GridView1"
runat="server"
AutoGenerateColumns="False"
DataKeyNames="ID"
DataSourceID="AccessDataSource1"
EmptyDataText="There are no data records to display."
Visible="False">
<Columns>
<asp:BoundField
DataField="ID"
HeaderText="ID"
ReadOnly="True"
SortExpression="ID"
/>
<asp:BoundField
DataField="Team"
HeaderText="Team"
SortExpression="Team"
/>
</Columns>
</asp:GridView>
<asp:AccessDataSource
ID="AccessDataSource1"
runat="server"
DataFile="App_DataIRISBS.mdb"
SelectCommand="SELECT [ID], [Team] FROM [tblTeam]"></asp:AccessDataSource>
</td>
I have some text fields fields of my page say P1, say T1, T2, T3. I also have a link button in my page which links it to another page P2, which also has some textfields. I also have a link button which links it back to page P1.
When i fill in the text fields in my page P1 go to the next page P2 and try to return to P1. I loose the values in t1, t2, t3.
How to retain those values even if i am moving back and forth between these pages
I have two dropdowns menu in detailsview (Both one table) . I want to change items in the second dropdown when the user selects an item in the first dropdown.
What I did as following but it does not work :
Add an empty SelectedIndexChanged event on the first dropdown and then, bind the second to the first under Selectedvalue. Also, sat AutoPostBack="True" on first dropdown.
I have three parameters to search and the record is being populated on the gridview.
Paremeters are dropdown lists:
lstDepartment, lstSection, lstLocation
I used AutoPostBack to true for above dropdowns but the problem I am facing is when I select value in lstDepartment to show values in lstSection then gridview data refreshes and after that when I select lstSection to show values in lstLocation then again gridview refreshes.
What I want to do is to when I'll select dropdown one by one then gridivew display data when a Search button pressed.
I don't want to refresh gridview everytime on the basis of dropdown selection.
I am developing a web application in ASP.NET3.5 with C#. I also using Telerik RadAjax Control. When user click the menu then open the page with a new tab(Like web Browser).I want to create, when user back any previous tab(page) the will be show the previous data without loading 2nd time( like browser tab).
View 4 RepliesSo I am using a formview that gets in Update mode with a bunch of values from a sqldatasource --- but I want to fill a couple dropdowns with data from the database --- but I cannot figure out how to bind the data to the dropdown box FIRST and then select the value in that dropdown box... but I keep getting an error that the Selected value is not a part of the dropdown (I assume because the sqldatasource is trying to bind BEFORE I can get the dropdown box bound).
IE -- when I load my values, lets say a 'Crop' comes back as 'Corn' ... I want to download the available crops from the database (ie. corn, beans, wheat, okra, etc.) and then set the selected value as CORN.... SO HOW do I get the dropdown filled BEFORE I try and bind the selected value?
i've 4 similar dropdowns in my form in four different categories, is there any way to bind one of them so that the remaining dropdowns can be automatically filled or binded with the same content as first dropdown
View 4 RepliesHere is the situation. I need to hit ~50 servers and grab some data from a file. I then want to display a few rows for each in an ASP.NET GridView control.
I tried doing this with Threads/ThreadPool and successfully gather all the data in session.
What I'd like to do, and what I am having a hard time figuring out, is update the grid for the user after each server is done loading.
If I put the databinding code in the thread, it will only display whatever has loaded by the time the response is sent back to the client. If I take it out of the thread, I'd have to wait until all threads were done to send the response, and that doesn't do what I want.
I seeing some stuff about Asynchronous Client Callbacks, but I'm not sure if that's what I need to be using. I have no idea how to manipulate a GridView from Javascript.
I have an existing asp.net web application I am redesigning to use a service architecture. I have the beginnings of an WCF service which I am able to call and perform functions with no problems. As far as updating data, it all makes sense. For example, I have a button that says Submit Order, it sends the data to the service, which does the processing.
Here's my concern: If I have an ASP.NET page that shows me a list of orders (View Orders page), and at the top I have a bunch of drop down lists for order types, and other search criteria which is populated by querying different tables from the database (lookup tables, etc). I am hoping to eventually completely decouple the web application from the DB, and use data contracts to pass information between the BLL, the SOA, and the web app. With that said, how can I reduce the # of WCF calls needed to load my "View Orders" page? I would need to make 1 call get the list of orders, and 1 call for each drop down list, etc because those are populated by individual functions in my BLL.
Is it good architecture to create a web service method that returns back a specialized data contract that consists of everything you would need to display a View Orders page, in 1 shot? Something like this pseudocode:
public class ViewOrderPageDTO
{
public OrderDTO[] Orders { get; set; }[code].....
Or is it better practice in the page_load event to make 5 or 6 or even 15 individual calls to the SOA to get the data needed to load the page? Therefore, bypassing the need for specialized wcf methods or DTO's that conglomerate other DTO?
