Web Forms :: Class Method Error "Arithmetic Operation Resulted In An Overflow"
Sep 28, 2010
I have a class that runs calculations on numbers and populates the results to my SQL database. My code behind page instantiates the class object, and in a loop it makes use of the method five times (once per loop). Essentially, my code behind collects the information from controls and passes the information to the class method for processing. The method works just fine most of the time.
On one of the iterations I get a error before the code even gets to the class. The error is, "Arithmetic operation resulted in an overflow." What strikes me as odd is that while stepping through the code, the loop crashes with that error before getting to the class that runs the calculations. Additionally, no arethmetic operations are performed on the form's code-behind page (which calls the method). I even put a break-point on the class constructor but the code crashed before reaching that constructor.
The information being sent is the results of matches from a sporting event. As a troubleshooting measure I changed the order of the matches by deleting them an re-entering them into the database in a different order. Again only this one particular match crashed. Here is the code that crashes:
[Code]....
View 5 Replies
Similar Messages:
Sep 30, 2010
I do not understand how this problem happens, and I need help. The code below is very simple. It collects data entered into controls; instantiates a class; then sends the data to a class method for processing. No resulting value is returned to this code.You can see that there are no areithmetic operations performed on the data, but I sometimes get the error "arithmetic operation resulted in an overflow" right here on the last line cRating.SetRating(etc...).
[Code]....
The class method uses the player id values (single) for the two players (iHPlayerID and iAPlayerID) to find their rating values. Calculations are made and the database is updated.Observation 1:I don't want to discuss the class method too much because, and this is the odd part,the code behind breaks before reaching the class. I have inserted a breakpoint at the start of the class method and ran the code. The error occurrs and the class codenever appears.
Observation 2:I mentioned that the class uses the players' ID values to look-up their rating from the database and round that value (single) to an integer. The code works just fine if the integer values of the players and not the same. The code fails and gives the error every time if the integer values are the same. How can this happen if the class code never executes?
View 2 Replies
Oct 19, 2010
know why this does this?
Server Error in '/' Application.
Arithmetic operation resulted in an overflow.
[code]....
View 2 Replies
Mar 31, 2011
I have an update panel that works lovely in my test solution but when I put it into the main project it does not work correctly.I've made it very simple, but still no joy, it consists of:the file upload controla link buttonthe link button has an onclick method that takes the file and creates a byte array. For some reason the contentLength is -2 every time. It does not matter what type of file I am using. Every time!
This is very frustrating considering it works fine in my test solution.Is there anything I am missing or should be looking at? EDIT:I am using VS2008CODE:
<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
</head>
[code]...
View 2 Replies
Sep 22, 2010
While executing select statement for a table then iam getting arithmetic overflow error.I found that retrieviing the data for a particular column showed that error ,sum() for that column is showing error.Is there any way i can rectify this problem.
View 10 Replies
May 7, 2015
I am trying to insert a value in database from a dropdownlistddlvaue = 10.00 - 11.00in db asstarttime=10:00:00endtime=11:00:00using split function
string dropdownvalue = ddlduration.SelectedItem.Text.ToString();
string et = dropdownvalue.Split('-')[1].ToString();
endtime = et.Split(' ')[1].ToString();
starttime = dropdownvalue.Split(' ')[0].ToString();
I am joining date value + time value in the query uisng('" + datevalue + "' + ' ' + '" + starttime + "')
'2014-05-15' + '16.00' --> to get 2014-05-15 16:00:00
it is getting inserted successfullybut while selecting and viewing it from the database I am getting error as,
"Arithmetic overflow error converting expression to data type datetime"
If i mannually enter the date in db it is workingmanuall value=2014-09-30 14:00query value =2014-09-30 14:00
both are same but error is only occuring for query inserted value
View 1 Replies
Feb 15, 2010
First of all im new to asp.net and am in the process of learning it.
Heres my problem, i am receiving this error when submitting the form: "Arithmetic overflow error converting numeric to data type numeric"
And it halts at command.ExecuteNonQuery();
Input form:
[Code]....
Code Behind:
[Code]....
Stored Procedure:
[Code]....
View 11 Replies
Apr 18, 2010
i have set the type of a column in a table numeric(6,2) but when i insert a value above 9999,99 i get the error
"Arithmetic overflow error converting numeric to data type numeric."
Do you know whats wrong??
ofc thats all through visual studio for an asp site thats why im posting here
View 4 Replies
Mar 24, 2011
using sql server 2005. I am working with an existing database field and there is a field where the string in this format: YYYYMMDD, for example 05/16/2002 is displayed as:
<example>
20020516
</example>
anyways I am trying to convert that string to a date like so:
[Code]....
however when I try to do this I am getting the following error
<ERROR>
Arithmetic overflow error converting expression to data type datetime.
</ERROR>
does anyone know a good solution for this? I just want to convert the string to datetime so I can use the value in my WHERE clause.
View 6 Replies
Mar 16, 2011
I have the following query:
Dim roommates = From p In dbroom.Residents _
Where p.room = queryStudent.First.r.id _
Where p.building = queryStudent.First.b.id _
Where p.year = year _
Where p.semester = term _
Select p.person_name
It currently returns no results. I was getting an error when attempting to bind this resultset (since it was empty) to a repeater in ASP.NET, so I attempted to escape it:
If roommates.Count() = 0 Then
Dim nomates As String = "No current roommates."
rptrRoommates.DataSource = nomates
rptrRoommates.DataBind()
Else
rptrRoommates.DataSource = roommates
rptrRoommates.DataBind()
End If
But I still get the same error:
The method 'First' can only be used as a final query operation. Consider using the method 'FirstOrDefault' in this instance instead.
View 1 Replies
Apr 19, 2014
How to pass parameter while calling a class file in aspx.cs...my class file,
public ExifMetaInfo(Uri imageUri)
{
BitmapFrame bFrame = BitmapFrame.Create(imageUri, BitmapCreateOptions.DelayCreation, BitmapCacheOption.None);
_metaInfo = (BitmapMetadata)bFrame.Metadata;
}
I am calling this in my aspx.cx as,
protected void Page_Load(object sender, EventArgs e)
{
WPFExifInfo.ExifMetaInfo classfile = new WPFExifInfo.ExifMetaInfo(Uri imageuri);
}
here showing error in (Uri imageuri);
View 1 Replies
Apr 8, 2010
Getting error when referencing a public method of Class1.cs (not in App_Code) in Default.aspx.cs.
View 5 Replies
May 10, 2010
This is very frustraiting because I have read a thousand posts on this and nothing works. I have a gridview which is programatically bound to a dataset which is created from dataset.readxml(xdocument.createreader). The table gets created without issue.
I have allow sorting set to true. when i click the sorting linkbutton I get the event handler error. So i create an empty event handler and that doesn't give me an error but also accomplishes nothing. So I searched and searched and found that i need to call the gridview.sort method to programmatically sort in the event handler. So when i do this
GridView1.Sort(expression, SortDirection.Ascending)
as seen in
[URL]
i get stackoverflow error. it creates an infinate loop. none of the 20 or so posts out there seem to answer how to handle this. They say that this method is the way to call sorting.
below is my event handler
[Code]....
the behaviour is that the event handler fires and executes to the sorting line which in turn refires the event handler.
View 2 Replies
Jan 8, 2010
Whenever I try to use the Website Administration Tool i get an error messege stating:
error invoking ad&minister website.
Details: The method or operation is not implemented.
How can I fix this?
View 4 Replies
Mar 15, 2010
I have used a MaintainScrollPositionOnPostBack = true function in 2.0 but is giving a stack overflow at line 0 error. What is the fix to this. I understand that it is a bug in IE.
View 2 Replies
Jan 18, 2011
I have a MS SQL Srver 2005 Database, that has a table with a DatTime column. The DateTime column is of smalldatetime type. The date and time is auto generated by the DB using getdate() function. This is because its a LOG recording table, so logs are just inserted and date-time is generated by the db.
When creating a log and saving into the DB through Entity Framework, using LINQ query, it causes an error while saving saying:
"SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM."
upon investigating using breakpoints i have noticed, when Entity Framework tries to save the Log object, the date set by Entity Framework is set to:
01/01/0001 00:00:00
I guess this is why error is coming up. Is there any way to resolve this?
I am using .Net 3.5 framework.
View 1 Replies
Dec 19, 2011
I am getting this error..
An unhandled exception of type 'System.StackOverflowException' occurred in mscorlib.dll
Sub randgen()
Randomize()
rndum = ""
Dim i As Integer = 0
For i = 1 To 8
x = Int(Rnd() * 10)
rndum = rndum & x
[Code] ...
I am getting error at con.Open()
View 1 Replies
Oct 21, 2010
i write script to add meta information to mp4 video, when my script try to add mp4 meta information to mp4 file. I/O Error arises and operation terminated possibly cause of "no permission to open file". which permission is required to solve this issue. I am using ASP.NET. windows 7.
View 5 Replies
Jan 3, 2011
I am working on file upload in my application.When the file is upload,i found this error :
SqlDateTime overflow.Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM
I cannot find solutions regarding to this error.Plz help me.Here is my codes where i think the error is come out.
[Code]....
View 30 Replies
Apr 16, 2012
sometimes i get timed out & sometimes error sending mail error when i am trying to send even only one mail frm yahoo to gmail or gmail to yahoo
i have a function fr emailing where in i pass the parameters needed
View 1 Replies
Apr 26, 2014
In My Project We Filter Dataview Which Contail Integer and string value
sort data likes this
dvv.RowFilter = filterfor + " Like " + SearchExpression;
but when integer value is encounter Error occurred
Cannot perform 'like' operation on system.int64 and system.string
View 1 Replies
Jun 25, 2010
I created a method in my class which will determine if an input is a numeric value or not.
Code:
[URL]
And even I input a numeric value in my entry, still I get the error message "Invalid entry". Can anyone from this community have an idea on how am I going to solve this issue.
View 3 Replies
Oct 18, 2010
I have an ObjectDataSource that I want to perform updates using a business entity i.e. Type="Object"). Since the values for the entity are within a user control, I have stored a reference to the control in Session and in the updating event, set the new instance to the value of the entity from the user contol property (which also pulls values from the form viaother properties of the control):
Protected Sub MasterDataSource_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.ObjectDataSourceMethodEventArgs) Handles MasterDataSource.Updating
Dim entity As New Login()
Dim accountControl As AccountInfo = TryCast(Session("AccountCtrl"), AccountInfo)
entity = accountControl.Entity
e.InputParameters.Add("entity", entity)
End Sub
And here's the markup for the datasource:
<asp:ObjectDataSource ID="MasterDataSource" runat="server" EnableCaching="true" CacheDuration="10"
SelectMethod="SelectAll" UpdateMethod="Update" TypeName="Data.DAL.LoginDAL">
</asp:ObjectDataSource>
My question is, how can I get the update method to pass this entity to the update method in my BLL class? It seems the Update method requires an ID or reference to the original object to use in determining whether any changes have taken place, but I don't really want to do this. In other words, I just want to use the Update event on my ObjectDataSource to pass my entity to the method ("Update") I set as a property and then let this business method handle the update of the data. Shown below, is the BLL update method I want to call:
Public Overloads Function Update(ByVal entity As Login)
If entity Is Nothing Then
Throw New ArgumentNullException("entity")
End If
MyBase.Update("UpdateLogin", entity.Username, entity.Password, entity.FirstName, entity.LastName, entity.Role, entity.Region, _
entity.Email, entity.Title, entity.TierID, entity.Street, entity.City, entity.State, entity.Zip, entity.Mobile, entity.Phone, entity.Fax)
End Function
When I try to call this as it stands now, I get an error: ObjectDataSource 'MasterDataSource' could not find a non-generic method 'Update' that has parameters: ID, entity. Previously, I'd set up a long list of parameters of basic data types (string, int, boolean), but this is rather cumbersome and I was hoping to use an entity for this (FYI, I also got the same type of error when I tried this approach, but with the ID as the
last parameter in the list). Perhaps what I'm doing here is atypical to how the ODS is normally used?? Has anyone done something like this successfully?
View 1 Replies
May 13, 2010
I am trying to run following, it is giving me error "Collection was modified; enumeration operation may not execute" how can I resolve
[Code]....
View 10 Replies
Jul 21, 2010
I get an error for the below code in <script>. Until this line the images is loading fine:
img.src = "images/4.jpg"But if I declare that line, I have an error message box that appears on the webpage:
"Stack overflow at line: 0"I have never had this error before and wonder what is causing this as I need to declare alot of images in this way. As seen I am downloading one image at a time from the server ant putting it to its controls wich works fine until this line of code.
[Code]....
View 6 Replies
