i want to create a few textbox dynamically in place holder but when i created and click on btn and use findcontrol to retrive input data that created dynamically storing data in db , i will receive an error like this :
Object reference not set to an instance of an object
My code:
[Code]....
But when I look at the result, just one RSS instance displayed. How can I add without create two instances of RSS control like this:
[Code]....
I have an application which has a default.aspx page. Inside the default.aspx page i have several <asp:placeholders>. I also created several webcontrols.
<asp:PlaceHolder id="headerPlaceHolder" runat="server">
I am building a website in which all of the site layout is in Master page and the content of the site is in the inherited pages. I have various links for navigation in which i simple use Response.Redirect to transfer to different pages. Now the problem is that I want to put the content place holder inside Ajax Update panel so that the postbacks are Asynchronous and I want to show the postback by an animated image inside Update Panel progress control. The problem is that I am unable to achieve this result and the entire page is posted back and rendered again. I have placed the content place holder inside the Ajax control toolkit's Update panel but it does not work. Is there any way that I can change the content of the content place holder to a new page with asynchronous postback.
View 9 RepliesJust getting started on ASP .NET and I have a question. I've created a user control that is show's an image. Using a place holder I add 5 items of that control. The problem is that in the display it shows me the control's vertically and I want it to be shown horizontally. Just to demonstrate what I mean (the numbers are the user controls been added):It shows:
1
2
3
4
5
I wanted to show: 1 2 3 4 5 I've tried a few thing's such as using a table - but the table expands with the place holder so It didn't make a differences.
I want to have only 1 placeholder on the page and depending on which buttons are pressed, different user controls are dynamically added. To add to the
fun of everything, I need to pass in different values for each user control.
I know that in order to have the values passed into the different user controls and bind to a certain list it needs to happen in the Page_Init inside of the .ascx.cs file - aside from that, I am lost.
How to refresh the area of only "content Place holder" not whole page.
View 1 Replieshow to iterate through all the controls in just my Content place holder ? What I'm looking to do is to Enable/Disable all the controls in my Content place holder (WEbControls as well as HTML Controls).
View 2 RepliesAjax calendar control not working properly with content place holder of Master Page.Most of time Calender Control hides when mouseover with out changing date in content place holder of Master Page.same code works in normal aspx pages.
View 2 Repliesim trying to do the following test:
i have one web page (test) and two masterpages (master_1 & master_2).
the test's masterpage is determined by querystring, so far it's working fine. both master pages have a set on links in content place holder area, but is it possible i can hide the content place holder where my links are, from one of the masterpage when my test page loads, because i don't wish to use the links in the masterpage for my test page. i don't want to delete the links either as i'll need them later on.
I have a master page called SiteMaster.master
The master page has a content place holder (ContentPlaceHolderID="MainContent")
I have a default page (default.aspx) with a VB code behind which pulls some data.
What I'd like to be able to do is write my data to that place holder for example:
<b>theData</b>
This is a simplified example of what I'll be doing but the part I can't figure out is how to write the content directly to the place holder on the master page from the code behind of the default the page.
i put one label in Master Page,
i want to change that name according to the conditions.
i have another page HOme.aspx,in that i enter user name. that name should come in Master page lable for that what should i do.?
In design time I created a Gridview and a delete button in a page test.aspx:
[Code]....
The program stopped at statement "if ((row.Cells[COL_INDEX_SELECTED].Controls[0] as CheckBox).Checked)",
because it cannot find the checkbox created before.
I tried to shift all the code in Page_Load to Page_Init, but the ticked checkboxes are still lost.
I could find the ticked checkboxes names in its request object parameters(this.Request.Params.AllKey) if I setup a breakpoint on the error statement.
Does anyone konw what's happening and how to retrieve the selected rows?
I'm putting together a help page for my web app and figured that rather than the usual 'Help' file stuff, I could put a short video help file along with an explanation.
I have a page with around 12 topics, I'd like the user to be able to click a link and it shows a video clip (either .avi or mov file) on the page. It would be cool if the movie placeholder just showed the link to the movie that was clicked rather than a new page each time.
i am using this code to reset all my textboxes and Dropdowmlists after the button is clicked:
void resetField(object myObj)
{
//RadioButton rl;
string temp = myObj.GetType().ToString();
switch (myObj.GetType().ToString())
{
case "System.Web.UI.WebControls.TextBox":
((TextBox)myObj).Text = "";
break;
case "System.Web.UI.WebControls.DropDownList":
((DropDownList)myObj).SelectedValue = "N/A";
break;
default:
break;
}
}
i have tested this code and it works great separately .. the only difference is on my project i have DIV, tables, TABs and ContentPlaceHolder. not sure if this can make this code not working.. i am not getting any error..but nothing is happening.
My master page has 3 content place holders:
1. left side bar
2. middle content area
3. right side bar
So it looks like:
<div id="left"></div>
<div id="content"></div>
<div id="right"></div>
On a particular view page (.aspx) that inherits the master page, I want to now show #3 (right side bar).
So I don't want the to be rendered at all.
i m using a place holder in which i m inserting checkbox list but i m unable to retrive selected values
[Code]....
I have a default page which has a content place holder on it...It defaults to the master.aspx page. Anyroad I attempt to put the loginview there but I can't seem to resize it. Is there something I'm doing wrong? I also put an ajax control in the loggedintemplate and I can't seem to resize that properly either.
View 5 RepliesI had a little project is create dynamic control. My project had get detail of content and replace in sign string, Add control in sign. After click button I will find in control, I had added on page load in panel. I can't get value in child control panel, Don't have control in panel. My source is
protected void Page_Load(object sender, EventArgs e)
{
string config_design = GetConfigueKey(configDesign);
Genform(config_design, GetContent(config_design));
if (IsPostBack)
{
btn_submit_click(sender, e);
}
else
{
string config_design = GetConfigueKey(configDesign);
Genform(config_design, GetContent(config_design));
}
}
protected String GetContent(string designname)
{
string rev = "";
mClsDB = new clsConn();
strSql = "SELECT STR_DESIGN_CONTENT,STR_DESIGN_NAME,INT_FORM_ID FROM TBL_DESIGN WHERE INT_DESIGN_ID = " + designname + " ";
DataTable dt = mClsDB.GetDataTable(strSql);
if (dt != null)
{
if (dt.Rows.Count > 0)
{
rev = dt.Rows[0]["STR_DESIGN_CONTENT"].ToString();
}
}
return rev;
}
protected void Genform(string designname, string content)
{
string rev = content;
mClsDB = new clsConn();
//strSQL = " SELECT INT_FIELD_ID,STR_FIELD_NAME,STR_FIELD_SIZE,STR_FIELD_CSS,STR_FIELD_DEFAULTVALUE,BIT_FIELD_VISIBLE,INT_FIELD_VALIDATE_TYPE,STR_FIELD_MINMAX,STR_FIELD_TYPE_NAME ";..................
I am wondering if it's possible to work on Content Place Holder window without seeing master page template?
The second problem i've noticed is that when i try to add a table (1 row, 3 columns) to my content place holder and then try to adjust the width of those columns the whole layout of my page is getting messed up to the point that i have to use ctrl+x to go back to previous stage. The master page was very complicated but i finally got it to work and i don't understand why while i manipulate contentplaceholder the layout of the master page is being affected. (only when adjusting tables)I am new to Visual Studio and was wondering of any known standars in that matter.
I've created 3 buttons, first button is to load the values in textboxes added to placeholder. Then button2 is to extract the data from button 1 and display out. Now the 3rd step, I want to edit the values from the textboxes, after edit, how do I grab and display out the new values in label and textboxes?
Code:
Partial Class _Default
Inherits System.Web.UI.Page
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim x As Integer = 1
Dim message As String
[code]....
I am using: .NET 2.0, VS2005
I customized a button from System.Web.UI.WebControls.Button (it is a Custom Control, NOT an User Control, no ascx file)the intention is to adding a OrderID property to the button, that can be bound to a datasource field.
Here is how this control is used in a aspx page:
[Code]....
Here is my definition of the MYButton class, it saved in a .vb file and placed in App_Code folder
[Code]....
Here is the code trying to use the OrderID in btnSave_Click()
[Code]....
The problem is OrderID is always returned as 0.
When first time page is loaded, and gridview is bind to a data source, I step through the code, and the OrderID property are set correctly, but after the postback caused by the button, the OrderID value has lost.
We would like to use a contentPlaceHolder in our pages to set titles. What we would like to do is have the masterpage check the contentPlaceHolder to see if it has content in it. This way we can set up an e-mailer that will tell us what pages that don't have page titles since we have a fairly large site. We also have nested masterpages.
View 1 RepliesI have a problem with ViewState. I have an aspx page that has a treeview on the left and an UpdatePanel with an ASP.NET Panel inside on the right. It is in that inner Panel where I load and unload dynamically user controls. I use that update panel to load dynamically controls.
I also made a custom control for my user controls because I need to pass some values from page. On that constructor I use ViewState to store these values.
The first time I load the user control I call its constructor with parameters. When I reload that user control on each postback I use its normal constructor.
My problem is I the values I've stored on ViewState has become null on successive postback.
Update:
This is a piece of my user control:
public class MyUserControl : System.Web.UI.UserControl
{
private int PKId
{
get { return ViewState["pkId"] as int; }
set { ViewState["pkId"] = value; }
}
public MyUserControl(int pkId)
{
this.PKId = pkId;
}
...
}
I'm following this article to load controls dynamically: http://msdn.microsoft.com/en-us/magazine/cc748662.aspx#id0070065.
Second Update:
I also set the same control ID when I load the user control at first time and on each reaload.
Maybe I can use another method to store these values like input hidden fields or Cache. I've choosen ViewState because I don't want to overload server with Session values for each user.
Third update:
I load the controls with this code:
System.Web.UI.UserControl baseControl = LoadControl(ucUrl) as System.Web.UI.UserControl;
if (baseControl != null)
{
baseControl.ID = "DestinationUserControl";
PanelDestination.Controls.Add(baseControl);
}
And reaload with this code:
DynamicControls.CreateDestination ud = this.LoadControl(TrackedUserControl) as DynamicControls.CreateDestination;
if (ud != null)
{
ud.ID = "DestinationUserControl";
PanelDestination.Controls.Add(ud);
}
which are the control/thigns in asp.net whose value is lost on page postback.
View 5 Replies