I would like to take a value from a text box and pass it as a search parameter to my database. I get the value from my code behind page as follows: protected void btn_click(Object sender, ImageClickEventArgs e)
View 2 RepliesI need to force SSL when going to the final checkout page (for example from default.aspx to checkout.aspx).
I need to pass variables to this check out page and tried to use server.transfer(https://www.mydomain.com/checkout.aspx). I then use previous page .Fincontrol to read text box and label name to this check out page. If I only do the server.transfer("~/checkout.aspx") then my I can read all vakues of my controls from the passing default.aspx page.
But when I force https:// then I cannot read the control values from default.aspx page.
Please give me some tips on how to get control values to the https:// destination page or if you have another tips on how to do it the right way, please let me know.
i have two user control page how to retrive text box and drop down value in both page in our aspx page
View 2 RepliesI am trying to pass a value from one aspx page to another using test2.aspx?Tag=blah.
When I try to pass Request.QueryString["Tag"] to a webusercontrol on test2.aspx it tells me that Request.QueryString["Tag"] is null or empty.
I am doing this in the page load. Should I be doing it somewhere else ?
I've a form containing 30+ textboxes. I'd like to save the data entered in the form texboxes in an object(session) and pass them into another page and simply display the values in a tabular form. How can i do that. Also, suggest me the best way to do it.
View 7 RepliesI have a web form that has drop down controls. These controls are data bound to a database. Now, I would like the results of the selected values to be shown on a new aspx page in a gridview or detailsview.
View 3 RepliesI'm having an aspx page with 2 frames, one is the header and the the other one is content frame which i'm trying to load it dynamically. Everything is fine. Let me explain my scenario
On the header frame i'm having 5 link buttons and when a link button is clicked i'm passing a hardcoded Page URL to the frames containing page and then trying to load that page in the content frame.
Below is my code, Everything as far as i know are in right place, but i cannot see the page in content frame..
Header.aspx.cs
[Code]....
Then checking frameURL querystring in default.aspx page load:
[Code]....
when the querystring is null, the SiteSummary.aspx page is getting loaded in content frame without any issue, but when there is a querystring value the page is not being loaded.
Here is my Default.aspx page
[Code]....
I am using FTB on my aspx page. is there any way I can have Toggle Full screen feature in FTB, is this feature availble in FTB? it is available on TinyMCE, but I don't want to switch to TinyMCE since I am already using FTB in most of the pages in my application.
View 1 RepliesI'm trying to use an ObjectDataSource's SelectMethod() to retrieve a result set from a sql server database to populate a data table with various stored procs that have any given number of parameters. My approach is to pass an object which contains the stored proc name and information about its parameters into the SelectMethod(). My issue is that I don't know how to actually set the default value. Here is the code I have so far:
ObjectDataSource1.DataObjectTypeName = "WebApplication1.Children";
ObjectDataSource1.TypeName = "WebApplication1.Children";
ObjectDataSource1.SelectMethod = "Select";
Parameter odsParameter = new Parameter() { Name = "storedProc", Type = TypeCode.Object };
// How do you set the default value to reference an object?
ObjectDataSource1.SelectParameters.Add(odsParameter);
namespace WebApplication1
{
public class Children
{
public DataTable Select(object storedProc)
{
// do stuff here and get db values.
}
}
}
The default value of a Parameter object is a string type. Does anyone know how to set the default value with an object or how I can pass an object into the SelectMethod?
I am new to VB.net programming and working on a school assignment. I have 2 display pages: default.aspx and DisplayTaxReturn.aspx. On default.aspx I have a list view where it uses data source to get the tax payer ID's from the server and I also have a details view where it displays the records associated to the tax payer.
When I click the View button on default.aspx it takes me to DisplayTaxReturn.aspx where it should display the tax payer ID and it's records that were displayed in default.aspx using label text fields.
My question is, how do I pass the values of the selected tax payer ID (datasource1 on default.aspx) to the DisplayTaxReturn.aspx page?
I have this javascript
function myFunction(source) {
window.open(source, "Title", 'width=400, height=400');
}
and in c# code I call it by
HtmlPage.Window.Invoke("myFunction", source);
which opens up a aspx page and goes to its OnLoad function:
protected override void OnLoad(System.EventArgs e)
{
base.OnLoad(e);
how do I pass in parameters to the event args in the aspx page? or is that even possible? and how can I pass these parameters from my c# code to the javascript?
i want to write aspx page html from aspx.cs page on page load..
i hav already used div.innerHtml...
i want to write below code in aspx page from aspx.cs page
[code]....
I am trying to pass some text values from one page to another and I am having some issues. When I click on one button in the parent page then it opens a new popup windows and the user introduce a value in a textbox and when the user click on other button in the popup page, it sould pass some text values to the parent page (puts it in a textbox). The problem is that I have to click twice on the button from the popup window to pass that values, the first time I click the button It shows an error message but the second time I click on it every thing works ok.
[Code]....
I Want to apply the text editor in my aspx page . i search some open source editor .but there is not provioded sufficient information how to implement..if any text editor in open source plz suggest me which is easy to use .. and provide me full information for installation
View 7 RepliesI have a text box and a asp button in master page, i just want to use the value of the text box on the target page. i have set the post back url of the asp button.on the page load event of the target page i write the following code
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not isPostback Then
Try [code]...
this is not working. i could not get the value of txtSearch.
i have a fileupload control which i use to upload file to the server. after the upload is successful i enable a hyperlink with the name of the uploaded file.
i want the user to be able to view this file in the browser after the file has been uploaded.
i did try assigning the navigateurl for the hyperlink = HttpContext.Current.Request.MapPath(".") + "\folder1\" + fileName;
which dint work. all uploaded files are being stored in a folder inside my solution directory on the server.
what i wanna do is:
there is an dropDownList in the master page with 4~5 items.
i've prepared 4~5 sub-page related to the above item. when the dropDownList.ItemChanged, the subpage content will show their own page.
use html iframe to include another aspx page.
in my cs code:
[Code]....
but when i change the item in the dropdownlist, the error pops up:
[URL]
I am using Master page and Content page combination.But how can i access <body> tag and it's event (onload, onunload) of Master page in .aspx page that is not a content page.
View 12 RepliesI have a master page which includes a search textbox and a button which posts back to another page. The controls are defined as follows:
<asp:TextBox
ID="SearchTextBox"
runat="server"
style="margin-left:
0px"
Width="170px" />
<cc1:TextBoxWatermarkExtender
ID="SearchTextBox_TextBoxWatermarkExtender"
runat="server"
Enabled="True"
TargetControlID="SearchTextBox"
WatermarkCssClass="watermark"
WatermarkText="Search Name" />
<asp:Button
ID="SearchButton"
runat="server"
Text="Search"
PostBackUrl="~/SearchPage.aspx"/>
The problem is that for any other TextBox on the page which is using this MasterPage, for example the login page, if you type your user name and password and hit Enter, The page is redirected to the SearchPage. If you click on login buttton everything works fine. How do I make sure hitting enter on the page in any other text box does not post back to SearchPage.aspx?
i have iframe:
<iframe src="www.google.com">
i want to generate the src dynamically can i do;
<iframe src="<%=urlname()">
OR
<iframe src="<%urlname()">
OR
<iframe src="<%=EVAL(urlname())">
AND
IS URLNAME() A FUNCTION OR SUBPROC?
i have win 7 with internet explorer 8.
i have a Web application project in the VS2010,
when i execute it using local port auto-asign port, the aspx page shows ok on the internet explorer.
when i run the same project from the IIS (Browsing the aspx page from the iis), only the controls text is displays without the controls (colors and menus .. ) - although the source view shows that the tags exists.
I have a C# project in Visual Studio that produces an aspx page. The code I am editing is in default.asp.cs. When I build the project a file default.aspx is produced. This file looks something like this:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="CSRValidationConnector._Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" [URL]-transitional.dtd">
<html xmlns="[URL] >
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div>
</div>
</form>
</body>
</html>
When I make my web request most of this page comes back. But I want the page to return only plain text and not any of this HTML. How do I configure things so that nothing is returned except what I add via Response.Write calls in default.aspx.cs?
So there is a a table and a text box in one of the cells
<td>
<asp:TextBox ID="tbSomeTextBox" Columns="5" runat="server"> %
</td>
This textbox gets shown if a certain selection is made in a drop down. The problem is that I would like the "%" character to also be hidden or shown with the textbox.
I have tried putting the whole textbox control inside a DIVand in my JQuery hiding the DIV at the same time I hid the textbox.
<td>
<div id="divSomeDIV"><asp:TextBox ID="tbSomeTextBox" Columns="5" runat="server"> % </div
</td>
But I get an error in my java script that id="divSomeDIV" doesn't exist in the current context.
$("#<%=divSomeDiv.ClientID%>").hide();
Wrapping that single character in a asp:Label seems like overkill.
I need to access a variable that is declared in a master page to a child page. I'm using asp.net 2.0 (vb). I'm sure this should be easy and is down to my inexperience with asp.net! A rough guide to my code is below;
MASTER PAGE
<%@ Master Language="VB" CodeFile="MasterPage.master.vb" Inherits="MasterPage" %>
<script runat="server">
Public UserNumber As Integer = 3
End Sub
</script>
CHILD PAGE
<%@ Master Language="VB" CodeFile="MasterPage.master.vb" Inherits="MasterPage" %>
have a question about passing a gridview to a second page. I'm filling the gridview in the first page and by clicking a button,it's directed to second page and I want to see this gridview on second page.Must I have to convert grid to datatable or is there any possible solution? I tried converting from grid to datatable
DataTable dt = new DataTable();
dt.Columns.Add("urunAdi");
for (int i = 0; i < grdSepet.Rows.Count; i++)
[code]...