ASP.net radiobutton change event writes the new selection to an XML file and that needs to be shown on the page but does not show the changes on the page since the page load occur before the event fires. give some insight how to resolve this.
View 2 Replies
I am developing an ASP.NET application that takes user input and serializes them into a text file. Now, when a second update request comes while the file is still being written, an IOException will be generated.How do I handle concurrent update request to this file?
View 2 RepliesIn my website I have configured the following in the web.config
[Code]....
Following is a line in my HttpHandler
[Code]....
Issue is that I cannot see anything written in the file. File gets created but nothing is written in it.
How to use RadioButton in FormView in EditTemplate to get information on the field, for example:
in the template:
<Asp: FormView ID = "FormView1" runat = "server" DataSourceID = "SqlDataSource1"
Width = "907px" onitemupdating = "FormView1_ItemUpdating" DefaultMode = "Edit">
<EditItemTemplate>
<table cellpadding="4" cellspacing="4" border="0" style="width:100%;margin-top:20px">
<tr>
<td> <strong> Type Person: </ strong> </ td>
<td>
<Asp: RadioButton ID = "CHR_TIPOPESSOAFISISCARadioButton" Text = "F" runat = "server" Checked ='<%# Convert.ToBoolean (Eval ("CHR_TIPOPESSOA"). ToString (). Trim (). Equals ("F")
"true": "false")%> 'GroupName = "RadioButtonTipoPessoa" />
<Asp: RadioButton ID = "CHR_TIPOPESSOAJURIDICARadioButton" Text = "J" runat = "server" Checked ='<%# Convert.ToBoolean (Eval ("CHR_TIPOPESSOA"). ToString (). Trim (). Equals (J)
? "true": "false")%> 'GroupName = "RadioButtonTipoPessoa" />
</ Td>
</ Tr>
</ Table>
<Asp: LinkButton ID = "UpdateButton" runat = "server" CausesValidation = "True"
CommandName = "Update" Text = "Update" />
</ EditItemTemplate
i have a gridview which consists of two columns.
1. name
2. radiobutton
when ever i click the radio button, the correspondng name should be saved in a variable in code behild(c#)
the gridview code looks as below:
[code].....
I am using ASP.NET 2.0 with C#(No AJAX) in my project. In a particular web page, when the a button is clicked, some server intensive processing occurs before the same page is displayed again with the results. While code execution happens on the server in response to Button_Click event, a blank white page is shown to user on his browser in between post backs.
How do i show a message in this case, that the processing is still going on and ask the user to wait.
I have used javascript to show a message on page unload. But this message is also erased when the page is posted back to the server and the user sees a blank white page on his browser. How do i avoid this white page? Is there a way to show a message in the blank white page ?
I have a gridview with rows of data and a group of radio buttons for each row that can be selected. But when selected the event never fires for the radio dropdown.... why?
[code]....
I'm dynamically generating radio buttons in my code behind and assigning javascript to them as they are created. This javascript will change the value in a hidden field for when a postback is eventually triggered (autopostback on the buttons is disabled). I am using the exact same method with ASP ImageButtons and it works fine but when I do it with the radio buttons the event never triggers the Javascript. I suspect that I may be using the wrong event name but I have tried several (onclick, onCheckedChanged, etc).
Here is a sample of the VB.NETcode - how come this works fine with my button but not my radiobutton!
//This is my hidden field
ClientScript.RegisterHiddenField(Me.UniqueID & "_someVariable", "")
Dim radDefault As RadioButton = New RadioButton()
radDefault.GroupName = "radio buttons"
radDefault.AutoPostBack = False
//This adds the Javascript to set the hidden field with an onClick event
radDefault.Attributes.Add("onClick", "document.forms[0]." & Me.UniqueID & "_someVariable.value='0';document.forms[0].submit();")
The code is simplified as the button generation is actually through an iterator but the same properties are given to each generated radio button.
In form I have added two radio button and on one radio button oncheckedchanged event has been registered but this event does happen only when i select the button and not when i select the other(The checked is changed).
code is posted below:
<asp:RadioButton ID="RadioButton1" runat="server" GroupName="a"
oncheckedchanged="RadioButton1_CheckedChanged" />
<asp:RadioButton ID="RadioButton2" runat="server" GroupName="a" />
<asp:Button ID="Button1" runat="server" Text="Button" />
And the code behind page just print the text of 1st radiobutton on changing the selection.
I have a gridview where i have a radio button. What i need is to on the selection of the radiobutton i have to find the datakey of the gridview. Also one more issue with that is , i can select more than one radio button, which should not happen.
View 1 RepliesI get this error while trying to run my project: "Column name 'UserID' appears more than once in the result column list." Indeed, the query generated in my SqlTableProfileProvider.vb is the following (text in brackets [] has been changed):
"IF EXISTS (SELECT 1 FROM [table] WHERE UserId = @UserId) BEGIN UPDATE [table] SET UserID=@Value0, LastUpdatedDate=@LastUpdatedDate WHERE UserId = '[Guid]'END ELSE BEGIN INSERT [table] (UserId, UserID, LastUpdatedDate ) VALUES ('[Guid]', @Value0,
@LastUpdatedDate) END"
I'll emphasize that the above statement is generated in SqlTableProfileProvider.vb, which was written by .Net people. While I have little control over its source, I've apparently given the fodder whereby the mistake can be generated. Any clues as to why UserID is being written twice in the statement?
I have a asp radiobutton on my page and when I display the page it appears that the border for he radiobutton is 50px and the text for the radiobutton is shoved down to the next line. I have the markup for the radiobutton below. When I use a standard HTML radiobutton it appears correctly on the page. See markup below:
[code]...
I want to download a file from database using asp.net c# code in page load event.My table design as below
Table Name: tblFiledownload
Id - int
Data - varbinary(MAX)
FileName - varchar(50)
FileExtension - varchar(50)
i have problem with radiobutton is in autopostback=true.
if i check rb1 page is refresh. after using update panel also i face the same problem in my code autopostback=true is compulsary beacause some controls open depending on this option..
THE CODE:
Session["foo"] = "bar";
Response.Redirect("foo.aspx");
THE PROBLEM:
When foo.aspx reads "foo" from the session, it's not there. The session is there, but there's no value for "foo".
I've observed this intermittently in our production environment. But I don't mean here to ask a question about Response.Redirect().
THE EXPLANATION:
Bertrand Le Roy explains (the bolding is mine): Now, what Redirect does is to send a special header to the client so that it asks the server for a different page than the one it was waiting for. Server-side, after sending this header, Redirect ends the response. This is a very violent thing to do. Response.End actually stops the execution of the page wherever it is using a ThreadAbortException. What
happens really here is that the session token gets lost in the battle. My takeaway there is that Response.Redirect() can be heavy-handed
with ending threads. And that can threaten my session writes if they occur too near that heavy-handedness.
THE QUESTION:
What about ASP.NET session management makes it so vulnerable to this? The Response.Redirect() line of code doesn't begin its execution until the session write line is "finished" -- how can it be such a threat to my session write? What about the session write doesn't "finish" before the next line of code executes? Are there other scenarios in which session writes are similarly (as though they never occurred) lost?
I want a code for disabling the second radio button if i click the first radio button. Only details regarding to first radio buttton should be displayed. The details of second radio button should be invisible.
View 1 RepliesI'm trying to change a Label's text property and colour properties depending if an event occurs on the page behind file.
Does anyone have a similar issue?
if (((Label)FindControl("Label1")).Text != null) - //getting Object reference not set to an instance of an object.
{
Label Labelmerchantid = (Label)FindControl("Label1");
Labelmerchantid.Visible = true;
Labelmerchantid.ForeColor = System.Drawing.Color.Red;
}
In my aspx page, i am calling a .cs file for data access, which also have a try -catch block. and now if any exception comes i want to show the modal popup of previous page.
But I am not sure it's possible or not.
[Code]....
I am using aspnet menu control and i want to hide the item initially on page load and show the item after an event is trigger say button lick event Can any one give me an example?
View 6 Repliesi want to search a text in the database even if user writes wrong spelling.
I am using LIKE operator. But I am not getting exact result.
For example: I want to search 'Norrebro' if user types 'Norebro' (wrong spelling)
LIKE operator does not work in this case. So how can I get the exact result??
I wnat to evaluate the performance of my web page. How can I show the time comsued of a page?
View 3 RepliesI have a website that contains several aspx pages linked to a single aspx.vb code behind file. Four of these aspx pages have a single button on each (four total). My issue is handling each button's click event on each page using the single code behind file.
My four buttons' names are:
[code]....
How to view Powrpoint ppt file in show in slide show Method in asp.net C#?
View 1 RepliesI have a masterPage on that i am using AjaxModalPopup for login purpose.My requirement is when i login via Master page then it should show the Logged-in User details on the current Content Page that is using same master page.
Here i am using following code to get it back to the same content page after succesful login but it does not show the user details on the same content page rather when i go to next page then it appears.
if (Session["SignedIn"] == null)
{
ValidateUser();
ModalPopupExtenderMaster1.Hide();
string currentPageUrl = System.IO.Path.GetFileName(Request.Url.AbsolutePath);
Server.Transfer(currentPageUrl);
}
But it does not gives user-details on the same content page.
how I can show the UpdateProgress bar only on a specific event?
View 1 Replies
