If you look at my sites main page, you can see there is white spaces on the top, left and right of the page. I just cant find any property to adjust them to zero.Seems like the whole thing is inside a box. This is a master page I have created and inherited in one of my pages.
View 1 RepliesI am trying to set up a master page and sub page where the margins are one color and the content is in the middle of the page set from the top of the browser to the bottom. Pretty standard stuff.
Except when I do this, I end up with my table not extending all the way to the top and not all the way down.
I set the body background color in the master page and then set the table background to white. I centered the table, and set the height property to 100%. But this is not working.
how to remove master page prefix from control ID after rendering content page
i m using master page in my web application, i am using a java script that works on one of my div id and i am genrating div at run time using C# code, problem is that one one of my content page rendred a prefix ct100 attached on that div,
How can i remove that prefix from my server side control (assume panel) id
in my default.aspx page i have a dropdown List and a textbox with a submit button below that there are 2 listbox... and the dropdown list holds the names of the listbox
my logic here is to select an item from the dropdown list and put some text in the text box and submit the form which will add an item to the listbox selected.. but when i do this i get an error saying Object reference not set to an instance of an object. i tried to figure out the problem and found that when i remove the reference to the Site Master Page it works fine and when i undo and apply my reference back to the Site Master Page i get the same error.
[Code]....
Is it possible to get the DropShadowExtender to throw a shadow on both sides of a Panel? I can get it on either left or right, but not that it is right behind the panel, giving the impression that the item is lifted slightly from the page.
If it can not be done with DropShadowExtender, is there another way to do this without actual background graphic?
My Project is a normal web site, not a Web Project, and I am using VS 2005.
I am trying to define common Master Page Type in app_code which has an area to display error messages and the like. Very simple.
I added the following in app_code:
[Code]....
Also, I added the following in Master Page Source Declaration:
[Code]....
Also, I added the controls tblrowErrMsg and lblErrMsg as server controls to the Master Page.
Why I am doing this ?
This will allow me to display error messages from nearly any where inside the code in code-behined, app_code, and other core Class Projects (DLL).
I have a master page setup that is used throughout my site that is basically a header with a menu. I recently added a textbox and a button to this master page which is to be a quick search box that is available anywhere in the site. When a user enters text into the search box and hits the button, I need to load the actual content page which is used to search and show search results (which also uses this same master page), and have the text entered available so the search can be triggered automatically. Again, this search text box and button is now in my master page so it could be triggered from anywhere in the app... it serves as a convenient way to do a basic search from anywhere in my app, without having to first navigate to the actual 'search page' that already exists. You can also navigate to the actual search page, which uses the same master page, where there is many more search options.I'm thrown off by the master page arrangement, which I have not used until this project. What do I do?
View 4 RepliesI'm trying to dynamically change the look of my main master page depending on what nested master page that the current content page is using .
So for example.
Main master page = main.master
My nested page = nested.master (uses main.master)
content page = content.aspx (uses nested.master)
So in the Page_Load event of main.master I want to add a switch statement that will check to see what nested master page is currently being used by content.aspx, or whatever content page is loaded.
So far I have got
protected void Page_Load(object sender, EventArgs e)
{
string nMaster = //This is the line of code that I am looking for.
switch(master)
{
case "nested.master":
//all my logic here.
break;
}
}
I've recently noticed this in my VS. What exactly is an Ajax Master Page and how is it different than a regular master page?
View 2 RepliesI have a page inside my folder ( say Admin Folder , Page1.aspx ) and I want to use the Master Page which is placed Outside the folder.
with Intellisense I am getting like this ~/Mymaster.master", but at run time it is throwing an error.
I have a master page containing a tree and 3 dropdown lists. I am populating a context menu on right click of each node, and when clicked on any item of the context menu, it navigates to required pages.
My problem is after navigating to the required page, the selected values from the drop down lists and the selected node from the tree are getting cleared.
I can set the selected values for the dropdown lists by making some properties in master page.
But how do i maintain the selected node?
In my content page, i have got the valuepath of the right clicked node.
Or is there any other way than setting the properties in master page?
I got a Master page and nested master pages in the subfolders.
Top Level Master page
Second Level Master page inherited Top Level Master page
Third Level Master page inherited Second Level Master page
However, changes (i.e. new images & alt. name) that I made in the Top level master page did not apply to the second or third levels.My webpage has a correct front page but not in the sections. How can i correct this ?
I am working on masterPage/sub masterpages, all worked fine until this morning.When I open a .aspx which uses masterpages, in the design view it shows the error message..
I've checked both master pages several times, all tags are matched and visual stuido itself doesn't indicate any errors. Also in debug mode the html page is generated without any problems..
My computer system froze on me, the mouse froze, cntrl-alt-del, did nothing, so I reset it. Did a disk check, and now everything seems fine except for my master Page html code which I was in the middle of editing when it happened. The VB code-behind file is still ok, the designer file still shows ok with all of the controls in it, but I can't get into desgn or source view. It just opens and gives a whole page of hesixecimal code such as as:
00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
It just gives me a whole page full of numbers like this. I haven't backed up for a few weeks and so I hope I can get this back.
I have a question about master page.After i pushed button i would like to change my master page to another master page for that page, is that possible?
View 4 RepliesIs it possible to inherit a sharepoint master page(as a parent) in another application's master page which will be treated as child (i.e. after integrating that standalone application with the sharepoint application)? I am totally new to Sharepoint..
View 2 RepliesI have a nested master page that has its own master page. The parent master page has a property defined in its code behind.
Public ReadOnly Property SelectedPage() As String
Get
Return _selectedPage
End Get
End Property
How can I reference the parent master page's property from within either the child master page's code behind Page_Load or aspx template page?
In the datapager, is there any way to hide the page number when the resultset is less than the pagesize. The number '1' is printed and it just looks like an orphan. I only want to show page numbers when the result set is larger than the pagesize
View 2 RepliesI am working on a functionality of user right, in which admin is selecting the pages and the user and save it. so whenever that user will login into the system then he will be able to see only those pages which were selected and saved for him by the admin.
now for that i have created one page for the list of pages of the application and user list and i am storing them into the database. and then to hide and show the panels i have created the BaseWebPage in my application but here i am not able to get the master page to hide the panel and show only those which are permitted. i dont have much knowledge of BaseWebPage. i am working in framework 2.0 and i have links of all pages that i have shown in a master page in a panel.
I have two master pages in my application(Suppose Master Page A and Master Page B). I have written a server side method in Master Page A.
How to access this method from code behind of Master Page B?
I have a 3 level nested master pages and a content page. parent1 is the top parent, parent2 is parent of parent3 and parent3 is the parent of the content page.
I get an error 'Cannot find ContentPlaceHolder xxx...' where xxx is a ContentPlaceholder. It resides in parent2 and content page is trying to fill it.
Can content pages only use their direct parent ContentPlaceHolders or can they also use any of the higher master pages?
How to access controls in master page using javascript? The master page consists of a search textbox, on key down event of the control I call a javascript function writtern inline of the master page. I get the value of entered in textbox in that javascript function. I have tried giving document.getElementById("<%=txtSearch.ClientID %>").value as well as document.getElementById("txtSearch").value. Both display error. I have to access the textbox control from within the master page itself!
View 1 RepliesI have an "Edit" page that uses a FormView bound to an EntityDataSource. The page is called with the ID field of the record to edit in the query string: "EditEmployee.aspx?ID=10". The EDS the FormView is bound to is using: AutoGenerateWhereClause=true and a QueryStringParameter. Below the FormView I have a ListView that contains some child records of the FormView. The ListView is bound to a seperate EDS and also uses the (same) QueryStringParameter.
The problem I am having is when this ListView attempts to Insert or Edt a column I receive an error because I don't have the ID field (EmployeeID) of the parent bound anywhere in the ListView (and obviously, it is setup as a ForeignKey so it fails, like it should). Any advice on the best way to get this ID (EmployeeID) column bound in the ListView? There are many things I can do in code behind, but I would like to solve this in the markup if possible. I can move the ListView so that it is inside of the FormView if necessary.
I am using Master page and Content page combination.But how can i access <body> tag and it's event (onload, onunload) of Master page in .aspx page that is not a content page.
View 12 RepliesI have a master page homeMaster.aspx and many content pages. However the situation is I have few .html pages. Now when a user clicks on a link the html page should get loaded.inside the master page. The problem is these are .html and not content page with .aspx.
View 4 Replies