i have webForm which have aspxMenu as toolbar.my problem is that when user click on aspxMenuItem, my requiredFieldValidator doesn't work, but when i use simple button instead of aspxMenu, it works!
View 1 Repliesi have two textboxes and two required filedvalidators for each one.and i have to validate based on the radio button slections.
1)if i select Radiobutton1 it has to validate both textboxes.
2)if i select Radiobutton2 it has to validate only one textbox.
I'm making a website in ASP.NET 4.0 where I make use of the RequiredFieldValidator control to validate a wizardstep.It works perfectly with Javascript enabled, but when I turn it off (in my Firefox) it just goes to the next step.We don't do a Page.IsValid check, but we don't do much on the "next button clicked" event either.Certainly not something that is forcing it to go to the next step.
View 15 RepliesAs you can see below, I'm trying to use "requiredfieldvalidator" to require an image---but I'm getting an error message (saying the Image field can't be validated.) Will requiredfieldvalidator not work with images (only textboxes)? Any suggestions for resolving this? Is the only solution to require the image programmatically in the code behind?
<asp:Image ID="Image" runat="server" AlternateText = "No image uploaded yet" ImageUrl ='<%# Eval("UserId","Image.aspx?UserId={0}") %>' Width="50px" Height="75px"/>
<asp:requiredfieldvalidator ID="ImageRequired" runat="server" ControlToValidate="Image" ErrorMessage="All fields are required. Please try again." display="static" ToolTip="All fields are required. Please try again." SetFocusOnError="true" CssClass="validate"></asp:requiredfieldvalidator>
XElement xml = new XElement("contacts",
from c in db.Categories
orderby c.CategoryID
select new XElement("contact",
[Code]....
I try to save datavalue in xml format in specific location ,Then want to bind AspxMenu with this file value value.
After run the code C drive contain file named contacts.xml . I want to bind menu by this file.*Help me to bind.*HOw to bind AspxMenu by .xml file value
i'm trying to make this work for several days but it just doesn't work.
this is my code:
aspx page:
[Code]....
webservice:
[Code]....
this was downloaded from this website.
the problem is that the page loads fine but no autocomplete occurs.
I am a new to WCF. I have written ajax to use a web service before, but on this project I am trying to use ajax to WCF.After I build the project and wcf using ajax, I receive the return successfully. But, 10 or more minutes later I don't get a return, the ajax calls the error function, and the fiddler returns nothing.
If I rebuild the project without any source modifying, I receive the return successfully again.
In my ASP.Net application, I am using ajax accordian control on my aspx page and vb.net for code behind pages.
I have used validation summary for page validation.
1st accordian Pane contains following fields:
First Name
Last Name etc.
2nd accordian Pane contain following fields:
Address
City
Country etc.
while validating the page It displays error messages in following sequence:
Address cannot be blank
City cannot be blank
Country.....
First Name....
Last Name....
But I want to display error messages in following order:
First Name cannot be blank
Last Name....
Address cannot be blank
City cannot be blank
Country.....
I tried to resolve it by giving tabIndex to textboxes and RequiredFieldValidator, but sequence doesn't change I created RequiredFieldValidator again in sequence, but it doesn't affect.
The forms works fine in Firefox and I was able to get an email from it. Here is the code below:
Partial Class _Default
Inherits System.Web.UI.Page
''' <summary>
''' Actions when the Send button is clicked.
''' </summary>
'''
Protected Sub btnSend_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSend.Click
If Not Page.IsValid Then Exit Sub
'Create instance of main mail message class.
Dim mailMessage As System.Net.Mail.MailMessage = New System.Net.Mail.MailMessage()
'Configure mail mesage
'Set the From address with user input
mailMessage.From = New System.Net.Mail.MailAddress(txtEmailAddress.Text.Trim()).........
what I want to do is: in one page, I got a navigation pane on the left and the content pane on the right. both of them are 100% height in the web page and both have its own scroll bar. However, I failed to set the height:100% although i've already set height:100% to html,body,div,table,tr,td. it just doesn;t work. if remove the "runat=server" from the form tag, it works fine. don't why~~~
Is it actually a bug of asp.net?
[Code]....
It seems my website doesn't accept some CssClass defined into my <asp:Menu>.Here is how I implemented it :
[Code]....
and here is my Style.css which works for everything else :
[Code]....
What I don't understand is that my .menuItems works perfectly good...For the "hover" style, if I try with ".menuItems:hover" it will work but I don't know why ".menuItemsHover" doesn't...What am I doing wrong with this code? I followed a lot of tutorial but no one seems to work...
Why the following code (asp.net 1.1) does not work?
//call.aspx
<script runat="server">
namespace DOTNETMath {
void Page_Load( Object s, EventArgs e )
{
ConstClass.DisplayEmployee("Testing");
}
}
</script>
//commonFunction.cs
namespace DOTNETMath {
Public Class ConstClass {
Public Shared Function DisplayEmployee(String x) {
Return x + " Hello ";
}
}
}
I have a problem, when i´m working offline, my favicon appears, but when i put my web site online in a iis server, doesnt appear
i have this:
[Code]....
Why this doesn't work?
[Code]....
Error: The HTTP verb POST used to access path '/WEB_Salaries/Programs/CALC.EXE' is not allowed.
I have set the MaxLength in the textbox and don't know why I can type more than the max length characters in the textbox. Do you know why? ....
View 9 RepliesI have been usiing thr profile provider in a net2.0 application and it works fine. I am now working on a 4.0 project and the profile doesnt work. I have the aspnet_Profile table in SqlServer and I have the code in the config.
[Code]....
But I don't get a Profile.XXX in the intellisense? What am I missing?
The following is trimmed down from the web.config file I'm using in a website that runs in Windows 2003 R2.
<system.web>
<!-- Required to use BetterImageLink and BetterImage class -->
<httpHandlers>
<remove path="*.asmx" verb="*" />
[Code]....
I'm migrating the site to a new server running Windows 2008 R2. When I tested the site, I fould that the BetterImage control doesn't work. I use the BetterImage control liberally throughout the site, so this is a real problem for me. I emailed the developer and he responded that I have to change the location in the web.config where I register my custom handlers. How do I do that? And are there any other changes I need to be aware of? How different is the web.config between the two Windows versions?
I have an issue with my asp:Wizard, where basically I am calling the MoveTo function and it is not moving to the desired step. I have used the MoveTo function elsewhere in my wizard, but I only have the problem with this specific location.
[Code]....
In the above code, ValidateSelectModelStep() returns false, and so the block of code is entered. urchaseWizard.MoveTo(this.SelectModelStep) is called, and yet the Wizard just continues on to the YourDetailsStep. This however is not he case for the other steps. When the validation fails on the other steps, and purchaseWizard.MoveTo(currentStep) is called, the Wizard correctly goes to the current step and displays the errorText. What is really bizarre, is that if I change the step that we want to go to when ValidateSelectModelStep() fails, the Wizard will correctly go to the specified step. So it seems as though there is only the problem with when you are on the first step, trying to MoveTo the first step. Even more so, is the fact that if I try to call purchaseWizard.MoveTo(this.SelectModelStep) from some other step in the wizard, it correctly brings you to the first step. Note: In the first step I have a repeater, which for the validation I need to loop through all of the items and find if one is selected. My Validation function for that works fine, and the MoveTo function does get called. (I checked it through debugging) Does anyone have any ideas why this is happening and how to stop it so my validation restricts progression through the wizard correctly?
I wrote a statement such that
cmd ="select [title] from products where sku='% "3.5 caddy" %'"
this statement wont return anyfin where there is products with titles startin with 3.5 or ending with caddy or containing 3.5 caddy but just not together for example there is this title "3.5" IDE to USB 2.0 Aluminum External Silver HDD Enclosure Caddy" and that search of 3.5 caddy wont pick this item up as 3.5 is at the start and caddy is at the end.
I'm trying to make a template control using UserControl. I have two issues: When I use the template it only show the Body text - not the Title text - why?. And I don't know how to implement styling (css) - can you tell me how to use a custom css file (Container.css) in .the App_Themes folder?
My code:
[Code]....
I store some values from code behind to a label which is Hidden !
<asp:Label ID="lbl_Hidden" runat="server" Visible = "false"></asp:Label>
and at the page load event i retrieve the value of the label & assign it to a string !
stringvalue = lbl_Hidden.Text;
Now i dont know why this manipulation does'nt work! I've a character 'A' in the string and i'm unable to replace it with a space ! stringvalue.Replace(A, " ");
I have put a form into an iframe. It is sent from another website to the php page on the site which has the iframe. Upon clicking the submit button nothing happens. Just a quick flash of the green page load bar. Why is this happening? I have spend hours on this...
[Code]....
i have a master page in a root and some pages in root and works perfectly, but now i need a different folder (secure) and in this folder i have an Admin page but doesnt show icons from master, only the placeholder. If i change the url from .css (url('images/page-bgglare.png') to (url('../images/page-bgglare.png') works the pages inside the folder but doesnt works the pages in root.
View 7 Repliessee this page:
http://karusela.net/2243_%d7%94%d7%a1%d7%9e%d7%95%d7%a8%d7%90%d7%99-%d7%94%d7%90%d7%97%d7%a8%d7%95%d7%9f.aspx
I am trying to POST automatically data into the page using that code.
[Code]....
But it won't work.
I have two questions . The first is how do I make this work. The second, hoe can I retrieve programatically the whole INPUT names of the form of a page?
I have a menu (linked to a sitemap) wrapped in to a panel surrounded by a round control extender. The menu has StaticMenuItemStyle, StaticHoverStyle and StaticSelectedStyle. The first 2 works like a charm but not the StaticSelectedStyle. On click of the menu item the screen is redirected to appropriate page, but the menu item cssclass is set back to StaticMenuItemStyle. The background of the menu items are images. I tried some of the solutions from other posts, but no use.
View 8 Replies