Web Forms :: Tag Images Not Displayed In URL Routing?
Feb 22, 2011
The image is not getting displayed on the page if it is called through the routing engine, and the image is displayed on the same page if the page is directly called (explicitly appending .aspx).
Only those image which are set using <img> tag are not displayed whereas the ones whose value is grabbed using the routed url and into the <asp:Image> tag are dislplayed properly.
I tried adding the following to global.asax file, but it did not.
When I check the image source using the firebug in html source code the path is available with all the attributes (src, height, width, alt) but the image is not displayed on the screen.
I'm using ASP.NET 4 Web forms routing, for example like this:
routes.MapPageRoute("page-browse", "{Language}/{Label}", "~/Default.aspx") So the webadress could look like: http://localhost/mywebsite/eng/home
In the root of my website I have a folder "Images".
Image display works when I'm in the root of my website, e.g. by using http://localhost/mywebsite/default.aspx
But when using routing it doesn't work, because the image relative url will look at http://localhost/mywebsite/eng/images instead of http://localhost/mywebsite/images
Is there a way to prevent this using ASP.NET 4 Routing mechanism? Or is the only way to use absolute url's to images?
I am generating a list of labels with an Image Button control at the start of each line. Unfortunately, my browser displays this list on a web page with the image higher than the label text by a few pixels. This results in a blank line of a few pixels wide between each line of text. Even the image has a blank line above it. This especially puzzles me since I went to the trouble of specifying the height, in pixels, of the image and labels. Is there any way to make the image and text appear evenly on the same line?
In details.aspx i have datalist that have 3 lable and 1 image when i write this code in global.aspx
public static void RegisterRoutes(RouteCollection routes) { routes.Add("BikeSaleRoute", new Route ( "bikes/{Data}", new CustomRouteHandler("~/Details.aspx") )); }
When i type behtob.com/bikes/1111 in addressbar it go to details.aspx and show this page with datalist that fill from my db 3 lables and 1 image but when i write this code in my global.asax
public static void RegisterRoutes(RouteCollection routes) { routes.Add("BikeSaleRoute", new Route ( "{Data}/", new CustomRouteHandler("~/Details.aspx") )); }
I should type behtob.com/1111 in address bar it go to details.asax but in my datalist just show 3labales that i bind from db it didn't show image that i bind from DB what should i do? I want use second code.
i need to change the images getting displayed in gridview as per IMAGE_ID selection...which is kept in a dropdownlist...is it possible...
this is my code where when user selects image_id and logo_id from two different dropdownlist...accordingly images and logos will be displayed on two gridviews...but when user is changing data in dropdownlist the gridview doesnot reflects the change
I'm getting a problem while using HTMLEditor. Images used in toolbars are not displayed well. Instead of showing correct images, it only show cross (x) image. After recycling the pool from IIS, everything's fine again. And the problem happens again next morning. Then, recycle the IIS, and fine again.
I checked url of image (Right click -> Properties) before and after. All are the same.
Here, I override the HTMLEditor in order to customize the tool bar buttons. But even I used the original HTMLEditor, the problem is same.
I can see all the.jpeg and .gif images when I execute site through my code, but after site deployment in Windows server, those images on web page is not been displayed.
I have a simple photo album. I have some catories in db and corresponding folders. For example, when user creates a category called "Asp Net" in db then a folder called "AspNet" is created. Then user can upload photo and all photos are displayed as thumbnail. No photo is saved in db, they are directly saved lets say AspNet folder. I just fetch filelist from intended folder and list them. However I want user to be able to update category name or delete it. To keep consistency, corresponding folder should be updated or deleted. But when I try it throws exception: Access to the path 'xxxxx" is denied.
ASP.NET 3.5 SP1 with Web Forms Routing thru Global.asax (System.Web.Routing and RegisterRoutes)IIS 7
Everything is working fine in my local machine, but it gives the following error in my hosting environment:
Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
I did everything inside my web.config file mentioned in the following link:
But when I run the site, there are no images displayed. this is the source code of the site :
[Code]....
in the code there ARE the images but as the result theres a blank page, I dont really understand it. and the problem is not in the url of the pictures, it can be opened normally by writting the whole url.
I have a Web application where i have added a reference to a RESTful WCF. I got the WCF url Routing to work in my webapplication by adding Inherits="RestService.Global" to the Web applications Global.asax.
But then i tried to create url Routing for the Web application and it does not work with the Inherits="RestService.Global" in the Global.asax. If i take it away it works fine. Is there a correct way to do this.
I'm trying to create my own CMS and I've gotten a little bit stuck at the stage of URL routing.
I want clean URLs without extensions and I'd like to be able to create and modify them in a web based interface without any messing around with IIS or actual files.
I've seen how to create a static route, but for that I need to go into my Global.asax file and manually add it.I would like to have all of these routes stored in a database so that I can easily modify them later.
Does anyone know how this can be achieved?
Just for extra information, I will be attempting to create a feature so that if a path exists, but is later changed, a 301 redirect is created to the new URL, is this also possible? (My first problem is the main issue, but thought I might ask this as well just in case it makes a difference)
I've got a Varchar2 field in my table which I want to convert to a CLOB. I am unsure whether the data would get truncated when selected. If so, what is the limit and does it depend on the database settings?
In my TOAD or SQLPLUS window it gets truncated but this may just be the environment settings. I'm not sure whether it would get truncated in my actual application (I can test this, but up to what size should I test?)
If it does get truncated, what's the best way to display the whole CLOB? There are other fields in my SELECT query, so I think I can't just loop through multiple rows. Is there any way out?
How to handle asp.net mvc routing along with asp.net webform routing. I have merged my mvc app into my existing web application. In my web application i have implement routing as below:
routes.Add("View Product Details", new Route("Product/{City}/{Manufacturer}/{Name}/{ProductID}/{*ProductType}"));
Similarly i have implemented routing in mvc as below
how to upload images to server(application/images folder) and retrive(display) from and on client PC for asp.net. its just for uplaoding logo directly to server folder and retriving from server to client. i am not getting server path on client pc for image.
i have the following scenario, i have a column of a gridview that shows me a text telling me is the user is allowed or not to access to some page, but now i just showing allow and deny, but i wanna show images that represent me the action, how can i do that?
I been stack for the last few days trying to figure out the SilverLight 4 LineSeries graph, for some strange reason the graph being displayed but the line not being displayed. I am pretty sure that my mistake is something very basic but I been straggling to pinpoint the problem by myself.Bellow is the code that I having problem with.
I've been trying to get image caching working for the last 8 hours and I keep the same problem time and time again, I'm trying to cache Images at the moment and then when thats succesful, apply this to cache my js and css files. I have at the moment Sql Dependancy caching working on my dynamic pages but the page still takes to long due to images not caching.
What I have tried is going to IIS7 Management and adding HTTP Response Header for the images folder and setting various things for the cache control.i dont care how long it caches it on the client or on the proxy servers i just would like it to check when the file was modified and compare it with the one in the client or proxy cache and if they are different then fetch the new image which has been ftp up. i could solve this by changing the image name but the thing is the image name is generated when they are ftp'd to the site by an application and the name is a direct reference to the product so i cant change the name each time, as it would mean making a lot of otherpages accross the board.
so What i would like, is to set and expiry date of lets say 32 days or more on the images and then check to see if they have changed by date modified or some other way of checking(Etags maybe) I'm not sure, if they have changed on the server then redownload and recache them, I tried using post-check and pre-check together but that just permantly cached them, so when i change the image the only way it would display the new image is to just hit F5.
In Brief, how can i Cache images, on the client machine/ proxy cache and recache them when the modified date of the file has changed.
