I have a very simple code:
[Code]....
But when I run the site, there are no images displayed. this is the source code of the site :
[Code]....
in the code there ARE the images but as the result theres a blank page, I dont really understand it. and the problem is not in the url of the pictures, it can be opened normally by writting the whole url.
can the images displayed through the AdRotator control be changed automatically without using refresh button?
View 2 RepliesI want to know that how to dispay the all images from the folder available on ftp to the web page.
Ex :
There are 5 folder are available on FTP site. If I want to access the folder A with all images. How it it possible ? The Image should display on slider.
I have a web site application using FW 3.5 and I have the following problem: In one of my forms when I click a listview an image control displays the image that corresponds to a directory, something like this:
imgImage.src = "D:\Images\" + this.lstImages.SelectedValue;
But this doesnt work, the image control always displays the Alternate text.
The code works when I copy those images to a folder inside the solution and when I reference them like this:
imgImage.src = "~Images/" + this.lstImages.SelectedValue;
Is this the only way? I have tried this with a couple of photos, but I cant put them all in C: drive (where the wwroot is located) because there is no space available, I really need to read those images from the D: drive.
Adding an ImageButton to the ImageMap control as a child control. I am developing a map that will be contained some user-defined nodes. The user can click anywhere of the map to add the node to that location. X locations and Y Locations are stored in the database. Initializing the page all stored nodes will be created programmatically. My problem is that the created nodes are invisible. If I replace the ImageMap with a panel control then all dynamically created nodes will be visible but in this situation I cannot capture the X and Y locations.
protected System.Web.UI.WebControls.ImageButton
btn;
protected void Page_Load(object sender,
EventArgs e)
{
btn.ImageUrl = "Images/..."
}
override protected
void OnInit(EventArgs e)
{
btn = new ImageButton();
btn.ID = "btn1";
btn.Style["Position"] =
"Absolute";
btn.Style["Top"] =
"100px";
btn.Style["Left"] =
"100px";
ImageMap1.Controls.Add(btn);//... invisible nodes
// Panel1.Controls.Add(btn);//... visible nodes
base.OnInit(e);
}
So I have one of the following problems:
1. Adding child to the ImageMap Control OR
2. Capturing the mouse X and Y Locations in the panel
How can I display photogarphs in an image control so that they are all the same size for an online catalogue without distorting the actual image.
I have taken the photos with a digital camera, loaded them in to Photoshop, cropped the image and finally resized the images to an acceptable size (while constraning proportions to avoid image distorsion).
The problem is that the images all have different height dimensions as while resizing i was able to choose the width that I wanted but as I had to constrain proportions to avoid distorsion, it caused the heights of the images to differ.
On my web form I have an image control that is set to the same width as the images but as the heights of the images differ from one and other, it is impossible for me to set a fixed height that will prevent some of the images being distorted when displayed in the image control.
In my Web page,I have a Div section with height=302PX and width=302PX.
In another page,I had a File Upload control. When we will upload the image,then the image will be displayed in that Div section.
1.When the image is large,it should be re-size and display in that particular Div section completely.
For Eg:The image size like 350PX*350PX and 1024PX*1024PX, it should be re-size to Div Section size has 302PX*302PX.
2.When the image is Small,it shouldn't be re-size and display in that particular Div section completely.
For Eg:The image size like 50PX*50PX,100PX*100PX and 302PX*302PX ,it shouldn't be re-size and display in that Div section.
For Eg:The image size like 15PX*15PX these will appear very small.But When uploading the file these images also should displayed completely with as it is in that Div section.But the image will displayed neatly.
3.If there are any tools for these type of conditions using ASP.Net.
How to preview images from SQL data base to Image control ?
I store images as "Image"
I'm still a basic user of ASP.NET and i'm trying to figure out how can i use the FileUpload control to give an uploaded image to the Image control.
The FileUpload control doesn't have an OnClick() event so when i hit Upload i don't know what happens with the uploaded file in the back.
what i'm trying to do is choose a file with the FileUpload control, preview it in the Image control and then save it in an SQL Server 2008 database in an "image" field.
How to Display the treeview control with multiple images(each link should be with one image) instead of + images in asp.net
View 2 RepliesI need to replicate the Web Forms ImageButton control in my MVC app and I have read about Html.SubmitImage. However, this helper method is not appearing in my list of options in Intellisense. Here is my code :
View 4 RepliesHow can i show multiple images with one imagebutton?For example 20 images per sec.
Here is my code.I tried timer control but it didn't work.
[Code]....
am i going to get the value when the user click my imagebutton, here the scenario i have an imagebutton on my datalist with an image of checbox, now when the user what to click the imagecheckbox the image will change to check image then when the user what to uncheck the item the imagebutton will change to uncheckimage, now how am i going to do that using click event of the control. if you'll ask me why i dont what to use the checkbox control it because i dont know how to adjust the control to a to its heights and width.. that is why i try to use the imagebutton in case there is a way to do it.
View 6 RepliesCan the ImageButton Control be used to implement Drag&Drop? My Drag&Drop function means drag the image,and drop it to desktop as a file or other applications, for example, Office Word,Office Excel,etc. Can the ImageButton Control be used to implement it?
View 1 RepliesI'm designing a sort of hierarchical system, as follows:
Contract
Master Commodity
Commodity
Sub-Commodity
Part
Each one of these are on their own page (for now). The user starts out on the Contract.aspx page. If they want to see the Master Commodities for the contract they are currently on, they will click the "ImageButton" I have set up, and I pass in as a command argument the ContractID (CommandArgument='<%# Eval("ContractID")%>'). This works great- I get to my Master Commodity page with the Master Commodities filtered on the ContractID I passed in.
Here's my problem: Navigating from the Master Commodity page to the Commodity page will (I think) require passing in the ContractID (so we JUST see stuff for the contract we're on), AND the Master Commodity ID (so we JUST see the Commodities that are related to the Master Commodity). I've tried the following: CommandArgument='<%# Eval("ContractID") + ',' + Eval("MComID")%>', but as you could probably expect, that doesn't work. If I can just do something like above and have a delimiter like the comma, I can go from there and make it work.
Trying to display the UpdateProgress but the control is not being displayed, not sure if I have the JS portion correct. However, the "Alert" box is showing.
Since I have an external trigger control in the UpdatePanel, the AssociatedUpdatePanelID will not work and I have to handle the display of the UpdateProgress control programatically.
Code:
[code]....
i am using a sitemappath control in my application. I have a master page and three content page. I declared a sitemappath control in all the three pages and a web.sitemap file. My problem is i get the sitemap only in my first page and in the other page i am not getting the sitemap control.
View 3 Repliesi have an image and an imagebutton, they are inside a listview and get their imageurl from databinding, i would like to know, if maybe the databinding value is empty, instead of showing a big red x, is there anyway to maybe make it link to a default image when the value is empty instead?
View 2 RepliesI want to put five buttons: introduction, product, history, feedback, contact. And when I click any one button, that button became dark blue, and others remain, no changes. So I write the following code:
Protected Sub ImageButton1_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles ImageButton1.Click
ImageButton1.ImageUrl = "~/image/CHOICE INTRODUCTION BLUE.jpg"
ImageButton2.ImageUrl = "~/image/CHOICE PRODUCTS.jpg"
ImageButton3.ImageUrl = "~/image/CHOICE HISTORY.jpg"
ImageButton4.ImageUrl = "~/image/CHOICE FEEDBACK.jpg"
ImageButton5.ImageUrl = "~/image/CHOICE CONTACT.jpg"
End Sub
Protected Sub ImageButton2_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles ImageButton2.Click
ImageButton1.ImageUrl = "~/image/CHOICE INTRODUCTION.jpg"
ImageButton2.ImageUrl = "~/image/CHOICE PRODUCTS BLUE.jpg"
ImageButton3.ImageUrl = "~/image/CHOICE HISTORY.jpg"
ImageButton4.ImageUrl = "~/image/CHOICE FEEDBACK.jpg"
ImageButton5.ImageUrl = "~/image/CHOICE CONTACT.jpg"
End Sub
Protected Sub ImageButton3_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles ImageButton3.Click
ImageButton1.ImageUrl = "~/image/CHOICE INTRODUCTION.jpg"
ImageButton2.ImageUrl = "~/image/CHOICE PRODUCTS.jpg"
ImageButton3.ImageUrl = "~/image/CHOICE HISTORY BLUE.jpg"
ImageButton4.ImageUrl = "~/image/CHOICE FEEDBACK.jpg"
ImageButton5.ImageUrl = "~/image/CHOICE CONTACT.jpg"
End Sub
Protected Sub ImageButton4_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles ImageButton4.Click
ImageButton1.ImageUrl = "~/image/CHOICE INTRODUCTION.jpg"
ImageButton2.ImageUrl = "~/image/CHOICE PRODUCTS.jpg"
ImageButton3.ImageUrl = "~/image/CHOICE HISTORY.jpg"
ImageButton4.ImageUrl = "~/image/CHOICE FEEDBACK BLUE.jpg"
ImageButton5.ImageUrl = "~/image/CHOICE CONTACT.jpg"
End Sub
Protected Sub ImageButton5_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles ImageButton5.Click
ImageButton1.ImageUrl = "~/image/CHOICE INTRODUCTION.jpg"
ImageButton2.ImageUrl = "~/image/CHOICE PRODUCTS.jpg"
ImageButton3.ImageUrl = "~/image/CHOICE HISTORY.jpg"
ImageButton4.ImageUrl = "~/image/CHOICE FEEDBACK.jpg"
ImageButton5.ImageUrl = "~/image/CHOICE CONTACT BLUE.jpg"
End Sub
It is workable, however there is only one problem: when i debug it some times it is ok, but some few times the button suddenly became small.
I extended an ImageButton control and its image is changing as expected, but its OnClick is not firing.
[Code]....
I am using fancyBox Scripts to display a link in IFRAme.
script for FancyBox is
<pre><script type="text/javascript">
$(document).ready(function() {
$("#various1").fancybox({
'titlePosition' : 'inside',
'transitionIn' : 'none',
'transitionOut' : 'none'
});
$("#various2").fancybox();
$("#various3").fancybox({
'width' : '75%',
'height' : '75%',
'autoScale' : false,
'transitionIn' : 'none',
'transitionOut' : 'none',
'type' : 'iframe'
})
});
</script></pre>
But till now i have used anchor tags <a> to invoke or trigger fancyBox Script. i.e <pre><a id="various1" href="#inline1" title="<b>Dr. abc</b>"> View Profile</a></pre> But now i want to trigger this on Asp buttonlink or Image Button.
how The asp.net calendar control is displayed in a popup window and the selected date will be displayed inside a Textbox control.
View 2 RepliesIs it possible to have the Accordion control to display horizontal instead of vertical? If so, how can I do this using the Accordion sample/demo on this site?
I want to display two different Gridviews with 3 columns on each GridView, on separate panes, but I want the panes to be side by side, so my users can compare the data.
I'm a newbie to Asp.net,learning from the Apress's Begining Asp.net...book.While very curious to see an image given by me on the browser,I'm stuck at the very first step,Configuration : Win7(32-bit),VS2008 Pro/.net 3.5,Firefox as default browser.Now,In created a simple website(not web app) in C#,added three images(.png,.jpg,.gif) to the App_Data folder(using the solutn. explorer of course).Then added the Image control from the toolbox & in the ImageUrl property, selected one of the images->presses f5 to start in debugging mode but every time the browser displays the alternate text given by me.
View 2 RepliesI have developed toolbar which contains the First,Next,Last and Previous buttons, based on the records display the buttons needs to be changed. Now how to disable and enable the button from .cs file or by using .css file.
View 2 Replies