C# - Adding Rows To A Table Based On User Input?

Jan 19, 2010

I have a TextBox entry field where the user will enter a integer value. And then there is a "Create" button, which when clicked upon must generate a Table with 2 columns :

"Name" and "Email" being the column headers.

I want each row to have a textbox in each of these columns.

All of this has to happen after the button is clicked. I have discovered that if you dynamically add a control in ASP.NET(I am using C#) then the controls are lost during postback. And I don't know how to prevent that from happening.

Can somebody give me some ideas regarding how to go about adding rows dynamically to a table (I tried using the asp.net Server side table control but ran into the "lost-during-postback" problem - can I try with something else like a gridview ? but afaik a GV will not work without data bound to it )

Point to note is that my table has textboxes for user entry and it is not for showing data ..rather it is for accepting data from the user which will be later used to persist details to the database.

View 1 Replies


Similar Messages:

Web Forms :: How To Generate Rtf File Based On Input Field (textbox Input By User) C#

May 27, 2010

how can i generate rtf file based on input field(textbox input by user) c#

View 3 Replies

AJAX :: Adding Table Rows At Specific Point In Table?

Dec 23, 2010

I have an asp:Table and around the mid point of the table there is a DDL with values 2-5. What I want to do is add the selected amount of rows using AJAX right after the table row that has the DDL in it. I know how to dynamicly crate the rows, the info in the rows, and how to use AJAX to make things. Problem is I can not put the ContentTemplate tag inbetween the asp:TableRow which would mark the location I want the dynamic rows to start being added. I did some searching on here but most posts I find start with making the table from code and not the asp:Table tag

View 2 Replies

C# - Dynamic Adding Rows Into Table?

Jun 9, 2010

How can I add rows in a table from server-side?

if (!Page.IsPostBack)
{
Session["table"] = TableId;
}
else
{
TableId = (Table)Session["table"];
}
protected void btnAddinRow_Click(object sender, EventArgs e)
{
num_row = (TableId.Rows).Count;
TableRow r = new TableRow();
TableCell c1 = new TableCell();
TableCell c2 = new TableCell();
TextBox t = new TextBox();
t.ID = "textID" + num_row;
t.EnableViewState = true;
r.ID = "newRow" + num_row;
c1.ID = "newC1" + num_row;
c2.ID = "newC2" + num_row;
c1.Text = "New Cell - " + num_row;
c2.Controls.Add(t);
r.Cells.Add(c1);
r.Cells.Add(c2);
TableId.Rows.Add(r);
Session["table"] = TableId;
}

in debug I found out the number in the "TableID", but the rows are not drawn. Have you got an idea about this issue?

View 4 Replies

C# - Match SQL Columns Based On User Input?

Jan 24, 2011

What i am trying to achieve is that there are 7 columns in my db table. one is primary key and rest 6 are integer columns. Now my application will allow user to input 6 values. I want to compare 6 values entered by user to those 6 integer columns and if in any row 3 or more columns match user's input Primary key of that table is returned..

I have tried using queries, cursor, nested loops and i am still unable to achieve my results..

DB Table Structure.. I am inputting 2,3,7,11,45,65. Number of returned rows should be 5. eg..

UID A1 A2 A3 A4 A5 A6
-----------------------
1 2 3 4 5 6 7
2 2 3 4 55 56 57
3 65 11 45 66 67 68
4 45 7 11 99 98 97
5 7 7 7 7 7 7
6 7 7 7 7 7 7
7 8 8 8 8 8 8
8 8 8 8 8 8 8
9 45 45 0 3 1 2
10 65 7 4 0 0 0

IDs returned should be 1,3,4,9,10

View 6 Replies

Adding Colors To Table Rows Programmatically?

Nov 25, 2010

recently i created a table programatically using c#.

now i want to format the table.

i want to give colors to the alternative rows of the table.

i am having the color values.(#E9F1F3,#98C1CA)

this is the code i have used to create rows and cells...

TableRow tr=new
TableRow();
TableCell tc = new
TableCell();
tc.Controls.Add(new
LiteralControl("...."));
tr.Cells.Add(tc);
DriverTable.Rows.Add(tr);
DriveTAble is the table name.

so i want to add colors to the rows..the colors should be in the hexadecimal code which i have specified above..

View 3 Replies

Adding And Deleting Rows Of A Html Table In C#

Jan 27, 2010

I am trying to achieve the multiple attachments. In order to do this, I am trying to add a new row to a html table. It must have 2 columns

1) The File Name which is a hyperlink

2) a button (html button preferably) on click of which I want to delete that particular row.

View 1 Replies

Web Forms :: Adding Rows In Table At Run Time?

Oct 9, 2010

I have a table which has few rows. A row contain few textboxes, one file upload field and a dropdown list in its cells. I want to make it a dynamic table that is i should be able to add extra rows in table at runtime, but I dont know how to do it.

View 6 Replies

Web Forms :: Adding Rows To Dynamic Table In Masterpage?

Dec 3, 2010

adding rows to dynamic table in masterpage?

View 3 Replies

Web Forms :: Adding Rows Dynamically To A Table Using Masterpages

Dec 1, 2010

I am using ASP.NET3.5, I want to Add rows dynamically to a table.I have written this code.This code is working fine if the Page is not having masterPage file. If I use masterpagefile in my ASPX age,controls(textboxes) are displaying at bottom of the page,and the data in textboxes is not retaining after click on Add button.Disaapering the text box values. My .Aspx:

[Code]....

View 2 Replies

Can Insert Rows To Table A Based On Values In Table B By A Single INSERT Statement

Dec 7, 2010

I am doing a data warehouse project.I have two tables tblA (id, type) and tblB(city, no_crimes, type).I want to create (insert) a number of rows based on the value of no_crimes.For Example, in tblB(Leeds, 2000, murder). SO, I need to insert 2000 rows into tblA by a single INSERT statement (not 2000 statements).

View 3 Replies

ADO.NET :: Linq Search - Dynamic Query Based On User Input?

Jan 12, 2011

I have two text boxes for the user to enter UserName & First Name, both these fields are optional and not mandatory to fill.

once the user presses the Search button, i execute the following query to fetch matching records.

[Code]....

The problem is, in cases where User leaves both the textbox or one of the textbox empty/blank, in that case that particular field should be removed from where clause.

More like if something is entered then search for that particular record otherwise search for all the records.

View 2 Replies

Web Forms :: How To Create Controls Dynamically Based On User Input

Apr 20, 2010

could u tell me add controls to a page base on user inputs,

i know the basic of creating a button dynamically but here I have to to add few controls based on user input and how to identify event for each dynamically create control.

View 2 Replies

Forms Data Controls :: Dynamically Adding Rows To A Table

Apr 19, 2010

I need to let my user add rows dynamically to a table, and after doing some research, it seems the best way to do this is through a GridView bound to a DataTable. However, I'm really struggling adding dropdownlists to the datatable, and this showing them in the gridview.

Here's the design I want:

ddl1 | ddl2 | ddl3 | ddl4 | ddl5 | ddl6 | ddl7 | textbox

When the user opens the form, he or she will be presented with one row. ddl2 etc will be populated when ddl1 is selected etc etc. When appropriate, the textbox will be enabled allowing the user to enter a comment (this is to report errors, and since users are, at best, not to trust to write the same thing twice, I need to use ddls.

Now comes the question - how do I add a ddl to the datatable? I've tried several ways, but I cannot get them added.

View 2 Replies

Web Forms :: Adding Table Rows Dynamically Only Works First Time?

Jan 13, 2010

I've been searching for hours trying to figure this out. I understand that somehow I need to recreate the control in page_load. I think seeing the code will let us better understand what I'm trying to do.

[Code]....

View 4 Replies

Web Forms :: Create X Amount Of Input Filed Based Off User Selection?

May 15, 2010

I have form in ASP.Net 4 (C# backend) that a user fills out to enter a new game quote into my DB. I have created the form and this lets the user add only a single quote at a time, what I would like to do is give the user a drop down box to let him/her choose to add up to 5 quotes at a time. The problem comes in how to generate the extra input forms based on what the user chooses. I have been going over my ASP.Net 4 book but it really does not cover this.

View 2 Replies

DataSource Controls :: Search Various Database Columns Based On User's Input?

Nov 18, 2010

I have five textboxes(tb1, tb2, ... tb5) on the page, each textbox represent a column in the database table.

I need to search the database table based on the text in the textboxes. User can either enter text in all five textboxes or none.

What's the best way to do a search?

I am thinking for one textbox(tb1), depends on if tb1.text is empty or not, I need to do 2 searches

[Code]....

for two textboxes(tb1 & tb2), depends on if tb1.text and/or tb2.text are empty or not, there are 4 combinations, so I need to do 4 searches

[Code]....

for three textboxes, there are 8 combinations,

Does that mean for five textboxes, I need to do 2 to the power of 5, 32 combinations, 32 if statements?

View 1 Replies

Data Controls :: Render Partial View Based On User Input In MVC

Jan 24, 2016

I want to know that how to render partial view based on where the user navigates. I mean to say if user navigates to Home/index it will load different partial view and if user navigates to Home/contact it will load different partial view on the _layout page. 

View 1 Replies

Forms Data Controls :: Dynamically Adding Rows To Table (html)?

Dec 22, 2010

Here I am binding a gridview. I dont know exactly how many rows it will exists. there may be from 1 to n rows possible there are 4 columns.

Now what I want , i.e. after gridciew binds records, suppose there are 4 rows are bounded to gridview, I want to send all rows data through mail, but in my html format there are fixed rows. I want to add rows according to throws which gridview having.

suppose gridview binds 3 rows the mail format should be like this

Date From Date To Place Days
12/12/2010 14/12/2010 Mumbai 2
12/12/2010 16/12/2010 Goa 4
12/12/2010 20/12/2010 Pune 8

1. first tell me how to get this data from gridview in variables so that i can put them in my mail format

2. this condition if grid bind only three records cos I have fiexd rows in my html format.. but if grid is haing 5 records then how will I add rows to table in my mail html format

View 3 Replies

How To Add Persistent Dynamic Controls Based On User Input (not On Intial Page Load)

Oct 13, 2010

I am familiar with creating and persisting dynamic controls on the first load of a page and on subsequent postbacks but I am having trouble with the following user initiated scenario...

In my demo I have a placeholder, two buttons and a literal

[code]....

View 1 Replies

Forms Data Controls :: Adding Rows To Grid View Based On Characters In Data?

Dec 20, 2010

I have a piece of data that has a refererence number and then account name that looks like this in the database:

111111,Member Account~222222,Trial Account

I have the data spitting out just like that in a grid view, but I am wondering if there is some C# I can put in to where it adds a column when there is a comma and another column when there is a ~ in the data?

View 4 Replies

Storing A User Input From A Textbox Into A Database Table And Being Able To Reterieve It Later On?

Jun 1, 2010

I would like a situation where there are three textbox available and this would give the user an opportunity to input a value in the textboxes. The value in the textboxes would then be stored in a database table(the table is already created in sql). Furthermore, the value would be able to be reterieved later on when the user presses another button. A sample code will help.

View 1 Replies

Security :: Adding Field To Membership User Table?

Jun 8, 2010

Is it possible to more fields in User table If yes, how to do that? share sample code. Do we we need to change any membership stored procedures?

View 3 Replies

ADO.NET :: Not Duplicate / Query A Products Table Based On Categories Selected By The User?

Feb 22, 2011

i posted a question yesterday but it got taken off by moderator mbanavige with the reason indicating it was a duplicate post. i know for sure it was the first time i was asking that question. i will have to ask it again NOW because it was deleted. hope THIS one does not duplicate the one i made yesterday. so here goes:

I need to query a products table based on categories selected by the user. The selection of the categories is a checkbox list, and user can select any number of categories (including none at all). I only know how to compare one parameter at a time. Like this:

[Code]....

View 3 Replies

Adding Multiple Rows, Displaying Session Rows And Then Doing One Insert?

Apr 14, 2010

I need to produce a from where I can add multiple parts. Each time a user enters a part number, the description should be populated. The user can then click add and this part and description will be shown below. They have the option to add as many parts as they require. Once all parts are added the user fills in some general info eg description and then once a submit button is clicked all part info will be inserted into a table and general info will be inserted into another table with one unique ID.

View 5 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved