C# - Is It Possible To Have Location Authorization Nodes In A Web.config Be External
Sep 20, 2010
Is it possible to have location authorization nodes in a web.config be external?
Such that I could take all of the nodes simlar to
[code]....
And move them outside of the web.config or something simlar? I find these nodes at an extreme amount of noise to a web.config when they're relatively static. Normally my approach would be to config source something like this but since it falls under the root node I'm not sure of it's possible with these nodes.
View 1 Replies
Similar Messages:
Dec 7, 2010
In my ASP.Net application I'm using URL routing.
The url format is somewhat like: [URL] To allow users to visit the login and recovery page, I've added the following entries to my web.config:
[code]....
Is there a form of notation so that I can skip the en-GB part and replace it with a wildcard? I want the login and recovery page etc. to be available regardless of the culture.
View 3 Replies
Sep 25, 2010
I want to maintain different user authorization lists for different environments. I know that connectionstrings can be broken out in an external file with configSource, but how would I do this for the following?
<authorization>
<allow users="someuser1"/>
<allow users="someuser2"/>
<allow users="someuser3"/>
<deny users="*"/>
</authorization>
View 1 Replies
Aug 4, 2010
look at the attached web.config? The last part doesn't seem to work although the path is correct. I've tried logging on the site with a use which is in no groups, but it can still access the page...
[Code]....
View 5 Replies
Nov 4, 2010
My web.config file has several authorization. May i know how can i update the roles value in to allow 'Staff' to access Page1.aspx programmatically.
[code]....
View 5 Replies
Oct 28, 2010
I implemented the Location tag in the web.config file to authorize the anonymous users for Images folder. I deployed the code in IIS6.0 with Forms authentication mode enabled for the virtual directory. I disabled all other authentication modes. When I browse the login page, Images are not displaying. When I set Anonymous authentication in IIS6.0 for the Image folder, it works fine.
See below the code implemented in web.config:
[Code]....
View 2 Replies
Mar 29, 2011
I am using ASP.NET MVC 3 and am trying to do something that should be really straight forward...
My application uses Forms authentication and that is working perfectly for controllers/actions. For example if I decorate either a controller or an action with the attribute below only members of the administrators group can view them:
[Authorize(Roles="Administrators")]
However I have a folder under the default Scripts folder called Admin. I only want members of the Administrators group to be able to access scripts within this directory so I created a new web.config in the directory with the following inside:
[code]....
However no matter whether a user is a member of the Administrators group or not they receive a 302 Found message and are then redirected to the login page.
If I change the web.config to allow user="*" then it works. It also works if I add an allow users="Username" for a specific user I am testing with.
View 1 Replies
Aug 30, 2010
I'm running an Asp.NET MVC 2 app under IIS 6.All pages are behind Windows Integrated Authentication except for some pages that accepts anonymous access.We setup these pages in the web.config with the location element like this
<location path="MyPath/ToThePage">
<system.web>
<authorization>
[code]...
this is an Asp.NET MVC app, the path indicated in the path attribute points to an action method not a physical location.When this was running under IIS 7 integrated mode it was working fine. But when we switched to IIS 6 we get the login prompt even with the pages that are set to accept anonymous users.ow to make IIS 6 authorize anonymous access to non physical paths ?
View 1 Replies
Sep 1, 2010
We are experiencing some strange behaviour on one of our ASP.NET web servers (Windows 2003 64-bit). After some activity, two third-party controls are unable to run correctly. One is log4net (it does not write error messages out) and the other is a menu control (it displays eval message instead of picking up its license). The one common thread is that both controls pick up their config from external config files (linked to from web.config).
Just wondering if anyone has any thoughts on this or experienced this in any way. Is it related to file/folder rights? The server has been running fine for a while and just started exhibiting this behaviour. Perhaps it occurs around the time the worker processes are recycled.
View 1 Replies
Sep 2, 2010
I have a problem using windows authentication and the authorization-tag in web.config for my asp.net application. When I host the application in IIS (both in IIS 6 and IIS 7) the authorization-tag is ignored. When I run the application in asp.net development server that comes with visual studio 2010, it works perfect.
Why will it not work in IIS? And how to solve it?
[code]....
View 1 Replies
Jan 28, 2010
I have the following authorization rules in my web.config:
[code]....
Except for the path attribute these two rules are the same. Is there a way to combine these two rules into one like path = Register.aspx, ForgotCredentials.aspx.
View 3 Replies
Feb 4, 2011
Is it possible to use multiple authorization elements in a single web.config to allow additional users access to one file?
E.g., I would like to allow User1 access to the whole application (including Page1.aspx), and User2 access to only Page1.aspx:
[code]....
View 2 Replies
Feb 18, 2011
I have two folders in my asp.net website namely VENDORS and ADMIN
i want when any user access any of the page inside the ADMIN folder it redirects to Admin/login.aspx until they login ....
i want when any user access any of the page inside the VENDORS folder it redirects to Vendors/login.aspx until they login ....
How to do that using web.config authorization ....
View 2 Replies
Feb 9, 2011
I read on a post that you can use ASP.Net authorization in the web config to control access to a WCF web service to replace the following attribute:
[PrincipalPermission(SecurityAction.Demand, Role="Administrators")]
To test I have been using "Administrators" which is a valid role so should allow me access and "TEST" which isnt. This works fine when using the above attribute however when I comment that out and use this in my Web.Config file:
<authentication mode="Windows" />
<authorization>
<allow roles=".TEST"/>
<deny roles="*"/>
</authorization>
It still allows me access.
So I was wondering if I have just got something wrong in the web.config or whether what I read was wrong saying to use that.
Just for reference this is the post I looked at:
Using Windows Role authentication in the App.config with WCF
and the following is my web.config:
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<authentication mode="Windows" />
<authorization>
<allow roles=".TEST"/>
<deny users="*"/>
</authorization>
</system.web>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpEndpointBinding">
<security mode="TransportCredentialOnly">
<transport clientCredentialType="Windows" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<services>
<service behaviorConfiguration="WcfService1.ServiceBehaviour1" name="WcfService1.Service1">
<endpoint address="" binding="basicHttpBinding" bindingConfiguration="BasicHttpEndpointBinding"
name="BasicHttpEndpoint" contract="WcfService1.IService1">
<identity>
<dns value="localhost"/>
</identity>
</endpoint>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="WcfService1.ServiceBehaviour1">
<!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
</configuration>
View 1 Replies
Sep 30, 2010
I'm using a Custom Role Provider for authorization.
There are 2 roles: "VIEWER" and "SYSTEM_ADMINISTRATOR".
I have set up my role for my account as "VIEWER".
Roles.GetRolesForUser(this.User.Identity.Name) returns "VIEWER"
User.IsInRole("SYSTEM_ADMINISTRATOR") returns false
Web.Config contains below:
<location path="Administration">
<system.web>
<authorization>
<allow roles="SYSTEM_ADMINISTRATOR"/>
<deny users="*"/>
</authorization>
</system.web>
</location>
However, I can still access the ~/Administration pages.
Even if I change the web.config to:
<location>
<system.web>
<authorization>
<deny users="*"/>
</authorization>
</system.web>
</location>
I can still access any of the pages, but I shouldn't be able to access any page when this is set. Correct?
I'm pretty sure my Role Manager is working fine (see above calls to User and Roles), but here's the config:
<roleManager enabled="true" defaultProvider="MyRoleProvider" >
<providers>
<clear/>
<add type="MyNamespace.MyRoleProvider" name="MyRoleProvider"/>
</providers>
</roleManager>
I'm testing this on my local dev environment using Cassini and on a test web server running IIS 6. Both systems/sites work the same way and allow anyone access to any page. Both systems/sites also return correct data when programmatically checking Roles.GetRolesForUser and User.IsInRole.
View 1 Replies
Jul 2, 2010
Trivial question:
Noticed the following error whilst trawling the logs:
Authorization rule names cannot contain the '*' character
I have the code:
[Code]....
Does that mean I don't need to make and authorisation rules - I had used:
[Code]....
Now - is that completely redundant? Also, is * wrong syntactically?
View 2 Replies
Jun 14, 2010
How i create a exception in location to allow access to page GanttViewer.aspx with other rol and others pages only with Admin rol
<location path="Admin">
<system.web>
<authorization>
<allow roles="Admin"/>
<deny users="*"/>
</authorization>
</system.web>
</location>
View 1 Replies
Apr 29, 2010
Is it possible to specify that multiple roles are required inside the authorization element of the web.config file? I currently have this block in one web.config of my site for a specific directory:
<authorization>
<allow roles="Global, Region" />
<deny users="*" />
</authorization>
I've just identified a special case where a person with two lower-level permissions than Global and Region should also have access to this directory. Roughly, I want something like this:
<authorization>
<allow roles="GlobalManager, RegionManager, SiteManager && FooSite" />
<deny users="*" />
</authorization>
I realize I probably should have a new role for this scenario, but I'd like to avoid that.
View 1 Replies
Sep 14, 2010
I don't have any sub catalogs for the .aspx files and this is my web.config file:
[Code]....
It's as if the Login.aspx won't grab the Site.Master if I add this authorization.
I get directed to the Login.aspx if I try to enter any other page, but without seeing the master page.
Is this enough info to solve this or do you need to know how the other pages looks like?
View 2 Replies
Dec 8, 2010
I am trying to secure an application in IIS7 using .NET Authorization Rules.
By default, the web server allows all users access (which is inherited).
I have added, just for this one application directory, a deny all users command, as well as an allow command for specific users.
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.web>
<authorization>
<allow users="myusername" />
<deny users="*" />
</authorization>
</system.web>
</configuration>
I have Windows Authentication enabled, and I can verify that without the line that my REMOTE_USER is MYDOMAINmyusername.
However, when I try to deny all users, I am prompted with the typical Windows domain username/password box. If I enter the username password, the prompt comes back up again 3 times until finally presenting me with a failure message. (I have also tried to no avail)
Looking in the event viewer, it appears as if my login using the username and pw is successful in the audit ... and to further that point, my account is not being locked out (which it would if I were failing to login over and over). So it's as if I am logging in, but the configuration is not seeing what I entered as matching my login.
Below is the message I see (even when connecting from the server using localhost):
**Access is denied.
Description: An error occurred while accessing the resources required to serve this request. The server may not be configured for access to the requested URL.
Error message 401.2.: Unauthorized: Logon failed due to server configuration. Verify that you have permission to view this directory or page based on the credentials you supplied and the authentication methods enabled on the Web server. Contact the Web server's administrator for additional assistance.**
View 2 Replies
May 20, 2010
how can I access the following settings in the web.config through code? Cheers
<compilation debug="true">
<authorization>
<allow roles="MyGroups" />
<deny users="*" />
</authorization>
View 2 Replies
Jan 1, 2011
In my web.config file, I have an authorization section that is supposed to deny all users EXCEPT for those included in the group specified. However, my login form doesn't allow these users to proceed to the next page - the login form just reappears as if the user has been denied. Code:
[Code]....
I have a user named 'test' that is in the Student Council group. I've tried 'allow users' and 'allow roles' with no success. I've also confirmed that the user is able to log into any workstation in my domain.
View 20 Replies
Jun 13, 2012
I have a sitemap defined in a web.sitemap file and I'm also doing role-based authorization for locations using web.config. I'm using the web.sitemap to generate a menu structure on a Master page, and I wanted to somehow hook the role-based auth from web.config into my menu to hide links to pages that would be denied access from the roles auth.
Is it possible to read the list of <location path=""> and associated role authorizations (allow or deny) from web.config so I can check that against the web.sitemap when generating the menu structure?
View 8 Replies
Mar 9, 2010
I have to duplicate some settings (like connection string) between a web.config file that a WCF host uses and a web.config file that a web client uses.
In the interest of not duplicating, can I have both the web.configs read from a separate xml file? The two web.configs can be entirely in different solutions/projects so I guess this is not possible, but wanted to get other's opinion.
PS: I do understand I can use a database to store all the config settings.
View 4 Replies
Oct 5, 2010
I am using an external config file (with MS Enterprise library):
[Code]....
In Global.Config I have a database settings:
[Code]....
But when I am trying to set a roleManager in web.Config:
[Code]....
it writes that can not find MainSqlServer connection string. I am understand why, so the question is - how to make this connection string (from external config file) visible to web.config.
View 3 Replies
