I want to read and write excel file . it can do with oledb , there is a limitation maximunm characters < 255 solution is mono data type , now create table become second sheet (when open excel it is shown as hidden.)
View 2 RepliesI would like to know your libraries recommendations to read and write Excel applications on ASP .NET website. I have tried GemBox and NPOI, because they don't required Excel to be installed on the server, but they have some limitations on handling Excel files that are marked to read only.
View 6 RepliesI want to read write excel file in my application without installing the office on my server. Means my server don't have any excel (MS office) installation. Is it necessory to install the office on server to excute the program of read or write the excel file.
View 5 Repliesi have been searching a lot but i didn't find my specefic result, my question is: how can i read excel sheet from asp.net using vb and how can i insert values into a worksheet from my web page
View 4 Repliesi want to ask whether we can read and write excel in website by using asp.net i don't want user to download the excel file and after edit upload again to website. what i want is user can read the excel file in website, after they edit, save the excel
View 4 RepliesActually I want to get a file and save its length, its MIME type, content into database in binary format.
It saved but not open in hander in correct format.
[code]....
i am working on the mobile application, and i want to read binary file .. its just contains the string.. e.g "hi Wel come". I have opened that file using filestream and try to read that file using binaryReader.. but it didn't read that file correctly. if i use
binaryreader.readstring();
it throws an exception of endOfstream. when i stored that stream into array of byte and read it through response.binaryWrite.... like
Response.clear();
Response.BinaryWrite(buffer);
Response.flush();
Response.close();
Response.end();
it shows me the correct result as i want ..i.e it shows the "hi wel come" on browser. like this i want to store that content of file into string
i have a table fileupload with id,username,filename,filedata,uploaddate here i have uploaded successfully...but i cannot retrieve the binary file uploaded by using its id. can anybody tell me how to read binary file from database using c#.net3.5?
I want to Export my gridview to Excel BIFF. Could any one suggest the approaches to do this.
View 2 RepliesI want to read and write a txt file but
The process cannot access the file 'D:BelgelerimVisual Studio 2005WebSitesmacrotechCounter.txt' because it is being used by another process.
what is wrong with this
StreamWriter FileWriter;
StreamReader FileReader;
string Countstr;
string str1;
int Len1,i;
FileReader = File.OpenText(Server.MapPath(Page.ResolveUrl("~/Counter.txt")));
FileReader = File.OpenText(Server.MapPath("~/Counter.txt"));
Countstr = FileReader.ReadLine();
FileReader.Close();
FileReader.Dispose();
i = Convert.ToInt32(Countstr) + 1;
Countstr = Convert.ToString(i);
FileWriter = File.CreateText(Server.MapPath("~/Counter.txt"));
FileWriter.WriteLine(Countstr);
FileWriter.Close();
Usually I use this code to read a file from beginning to end into a List<> and then I write to a file with the code I have above.It seems that StreamReader/StreamWriter is not possible to use in Global.asax.I simply might wonder how I can convert this code for Global.asax?
[Code]....
I have created an excel sheet from datatable using function. I want to read the excel sheet programatically using the below connectionstring. This string works fine for all other excel sheets but not for the one i created using the function. I guess it is because of excel version problem.
OleDbConnection conn= new OleDbConnection("Data Source='" + path +"';provider=Microsoft.Jet.OLEDB.4.0;Extended Properties=Excel 8.0;";);
which i can create an excel sheet such that it is readable again using above query. I cannot use Microsoft InterOp library as it is not supported by my host. I have even changed different encoding formats. Still it doesnt work
[code]....
how to write data in and excel sheet. when i retrive the data by foreach loop i want to dynamicaly create a excel sheet and save data inside the sheet.
View 3 RepliesIn asp.net mvc project I am using MYSQlMemberShipProvider. Now I want that instead of reading the connection string from web.config file, it will read the connection string from external file every time. So that I am implementing the cutsom mebership provider class, this class inherits the MemberShipProvider class. But the problem is that if I inherits the MemberShipProvider class then I have to impelment all of its method in my cutsom membership provider class, But I want to use all other inbuilt methods of MemeberShip. What can i do. I only want to add the code like below:
public class CustomSqlMembershipProvider :MembershipProvider
{
public override void Initialize(string name, NameValueCollection configs)
{
base.Initialize(name, configs);
Connectionstring objProducts = // redaing the connection string.
}
}
But on compiltaion it is giving me the error does not implement inherit abstract member.
I a now Porting a data from Uploaded Excel File to database. In that, I need to check "Sheet name" Of that Excel file Whether it is Sheet1 or Sheet2 or something else...
how to Check/Read Excel Sheet name at runtime..
i can't read picture from file excel in code asp.net
View 2 RepliesI have a web app where user uploads a file.ile is saved in server locally and I want to read some data from it.Currently my development server has office 2003.So do I need office 2007 in order to be able to read an excel from office 2007 ?
Microsoft.Office.Interop.Excel.Application excelApp = new Microsoft.Office.Interop.Excel.Application();
Microsoft.Office.Interop.Excel.Workbook wrkBook; // = new Microsoft.Office.Interop.Excel.Workbook();
using below code im reading excel sheet data by specifying the sheet name as [Project1$] but, how do i call the excel sheet without specifying the sheet name so, that it will ready any files.
string strFileName = FileUpload1.PostedFile.FileName;
string connectionString = "Provider=Microsoft.Jet.OLEDB.4.0;" + "Data Source=" + strFileName + ";" + "Extended Properties=Excel 8.0;";
OleDbConnection objConn = new OleDbConnection(connectionString);
objConn.Open();
String strConString = "SELECT * FROM [Project1$]";
I have been googling this and have not come along a working solution for an entire day. I don't know anything about binary data types (as I've never knowingly used them) and I'm trying to write a binary value that I see in the registry, to the registry. Now, all I see is the following [shown below]... and if I try to pass that as a string to the RegSetValueEx in the WinAPI and of course it errors out... I do not know what 'numbers' I need to pass into the lpData As Any, argument of RegSetValueEx (i tried a bit array) in order for it to come out as the following [shown below] in the regedit. I really have no idea, and my tests to place random numbers in the bit array just produce corresponding random "figures" as visible in regedit that I do not understand how to 'tie' them together logically.
here is the culprit!
[Code]...
If I had the following in a string or a bit array, what must I populate the bitarray with so that the registry outputs this [above] when written? or, how can I figure out how to do it? I was hoping there'd be a function that reads my string of binary data and transforms it into the real binary format to submit to the RegSetValueEx function in VB6 or other function in VB.Net or C# (this really is a language agnostic question, and the problem exists in all languages; ie: same process).
I have a problem that I have been trying to solve the past two days, but I cannot figure it out...I have a folder which will have 60-70 Excel Files or CSV Files (they are right now). There are no headers in them, but they all have the same # of columns and the columns are in the same order in each fileI need to read each file in the folder, grab the data from the file and put it in a Database file. So all files will be read and then the data from them I guess put in a DataSet and then put into a Database (SQL).
View 3 RepliesI have developed an application where I need to create a page to read data from Excel File and then update it to the database. The code that I wrote works only when the application runs from my machine. When I deployed the application to the server it gave an error- 'C:PRFileIimport_File.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. here is mu code -
protected void InsertData(object sender, EventArgs e)
{
OleDbConnection oConn = new OleDbConnection
(@"Provider=Microsoft.Jet.OLEDB.4.0; Data Source=C:\PuertoRicoFile\Puertorico_Iimport_File.xls ; Extended Properties=Excel 8.0 ");
OleDbCommand oCmd = new OleDbCommand("select * from [Puertorico_Data$]", oConn);
oConn.Open(); //Here [Puertorico_Data$] is the name of the sheet in the Excel file where the data is present
OleDbDataReader oleDbReader = oCmd.ExecuteReader();
string AgentIP = "";
string TagName = "";
string Status = "";
string Severity = "";
int EventCount = 0;
string EarliestEvent = "";
string LatestEvent = "";
while (oleDbReader.Read())
{
AgentIP = (string)oleDbReader[0]; // valid(oleDbReader, 0);//Here we are calling the valid method
TagName = (string)oleDbReader[1]; //valid(oleDbReader, 1);
Status = (string)oleDbReader[2]; //valid(oleDbReader, 2);
Severity = (string)oleDbReader[3]; //valid(oleDbReader, 3);
EventCount = Convert.ToInt32(oleDbReader[4]); //oleDbReader[0]; //valid(oleDbReader, 4);
EarliestEvent = (string)oleDbReader[8]; //validate(oleDbReader, 8);
EarliestEvent = EarliestEvent.Substring(0, 19);
LatestEvent = (string)oleDbReader[9]; //validate(oleDbReader, 9);
LatestEvent = EarliestEvent.Substring(0, 19);
InsertDataIntoSql(AgentIP, TagName, Status, Severity, EventCount, EarliestEvent, LatestEvent);
}
SqlConnection mySQLconnection = new SqlConnection(ConfigurationManager.ConnectionStrings["IssNetworkReportingSystemConnString"].ConnectionString);
mySQLconnection.Open();
SqlCommand cmdSql = new SqlCommand("AddMonth_Event_TotalInfo_for_Puertorico", mySQLconnection);
cmdSql.CommandType = CommandType.StoredProcedure;
dbReader = cmdSql.ExecuteReader();
dbReader.Close();
cmdSql = new SqlCommand("AddQtr_Event_TotalInfo_for_Puertorico", mySQLconnection);
cmdSql.CommandType = CommandType.StoredProcedure;
dbReader = cmdSql.ExecuteReader();
dbReader.Close();
oConn.Close();
lblMsg.Text = "Data Imported Sucessfully";
lblMsg.ForeColor = System.Drawing.Color.Green;
}
public void InsertDataIntoSql(string agentIP, string tagName,
string Stat,string severity,int eventCount, string eEvent, string lEvent)
{//inserting data into the Sql Server
SqlConnection mySQLconnection = new SqlConnection(ConfigurationManager.ConnectionStrings["IssNetworkReportingSystemConnString"].ConnectionString);
mySQLconnection.Open();
SqlCommand sqlSelect = new SqlCommand("SELECT SeverityID from Severity where SeverityDesc=@SeverityDesc",mySQLconnection);
sqlSelect.CommandType = CommandType.Text;
sqlSelect.Parameters.Add("@SeverityDesc", SqlDbType.NVarChar).Value = severity;
dbReader = sqlSelect.ExecuteReader();
int severityId = Convert.ToInt32(dbReader.Read());
dbReader.Close();
SqlCommand sqlInsert = new SqlCommand("Insert into IdsData_Puertorico(AgentIP,TagName,Status,SeverityID,EventCount,EarliestEvent,LatestEvent)" +
" values (@AgentIP,@TagName,@Status,@SeverityID,@EventCount,@EarliestEvent,@LatestEvent )" ,mySQLconnection);
sqlInsert.CommandTimeout = 0; //timeout unlimited
sqlInsert.CommandType = CommandType.Text;
sqlInsert.Parameters.Add("@AgentIP", SqlDbType.NVarChar).Value = agentIP;
sqlInsert.Parameters.Add("@TagName", SqlDbType.NVarChar).Value = tagName;
sqlInsert.Parameters.Add("@Status", SqlDbType.NVarChar).Value = Stat;
sqlInsert.Parameters.Add("@SeverityID", SqlDbType.Int).Value = Convert.ToInt32(severityId);
sqlInsert.Parameters.Add("@EventCount", SqlDbType.Int).Value = Convert.ToInt32(eventCount);
sqlInsert.Parameters.Add("@EarliestEvent", SqlDbType.DateTime).Value = DateTime.Parse(eEvent);
sqlInsert.Parameters.Add("@LatestEvent", SqlDbType.DateTime).Value = DateTime.Parse(lEvent);
sqlInsert.CommandType = CommandType.Text;
sqlInsert.ExecuteNonQuery();
mySQLconnection.Close();
}
Iām trying to read images from an excel file using OleDbDataReader. My excel file has 6 columns of data, the first 5 are all text but the last is image. While Iām reading the record, It's doing fine on the first 5 columns but return me with a for the sixth column.
Here is my demonistration code:
[code]....
I need a way to read all the rows in one column from an Excel file that the user picks from a fileupload control. I tried saving the excel file on the webserver with the upload control and then opening it with a OleDbConnection but that fails when running it from the webserver and gives the error:
Request for the permission of type 'System.Data.OleDb.OleDbPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
This works fine when just running it localhost, so i figured it might be a problem with security level at the webserver which i cant change. Instead i tried doing it with a streamreader direct from the fileupload control and because theres no need for saving the excel file on the server, but im not sure how to query the rows i need this way.
I need to browse excel file and update the neccessary tables based on some ID. It is basically updating employees in bulk.
View 7 RepliesI need to upload an excel file using a web application. Then I need t oread it in memory without saving it on the server.
Does the file need to have headers? Also the data is such that it may have or may not have values for some columns.