I have created a TraceExtension class that inherits from SOAPExtension. I then apply the extension to the WebMethod using [TraceExtension] above the signature. This all works well and outputs to a file specified in the TraceExtension class.
I would like to really enable / disable this in the web.config, does anyone know how this can be done, or if it can be done??
ASP.Net 2.0 Web Services automatically create both SOAP 1.1 and SOAP 1.2 bindings. Our web service, however, has SOAP extensions and custom exception handling that make the assumption that only the SOAP 1.1 binding is used (for example, the SOAP extension uses the HTTP SOAPAction header to control behavior).
I am looking to correct the code that makes these assumptions and make it work with either SOAP 1.1 or SOAP 1.2 properly. I am running into a bit of a problem in the generation of elements for our SOAP faults.
Consider the following web method implementation:
[Code]....
The SOAP 1.2 response now has the wrong qualified name for the detail element. It should be <soap:Detail>, but instead is merely <detail>, same as the SOAP 1.1 response.
It seems that the ASP.Net 2.0 framework has done quite a bit to transform a SOAPException into the appropriate form for the SOAP version, but neglected to properly handle the detail element. Additionally, they don't seem to have exposed the correct SOAP 1.2 qualified name for the detail element as was done with the SoapException.DetailElementName property.
So, what is the correct way to add a detail element to a SOAP fault response that works for both SOAP 1.1 and SOAP 1.2? Do I need to detect the SOAP version myself and hard-code the SOAP 1.2 qualified name for the detail element?
I'm trying to create a setup in my ASP.NET website that allows me to enable/disable logging while the application is running at any point. I figure some of you have already done such a thing.
Here's the gist of what i'm trying to do:
if(ShouldBeLogging)
logger.Info("helloooooo there");
So how would you set up the boolean value ShouldBeLogging to be able to be turned on/off while the website is running without getting any serious performance drawbacks(seeing how its going to be accessed frequently)? I was thinking about putting something in the web.config, but wouldn't a change to that kick my user sessions if i wanted to turn it on?
I would like to disable or enable DIV section on asp.net MVC form :
if dropdownlist selected value ="Univ" then I enable div section else I disable div section
the div section to Disable and enable is EnableFacultéOrUfr
[Code]....
javascript function
[Code]....
I need to set file extension precedence. I want the browser to show default.html before default.aspx. Is there a way to set this up in a web.config file?
View 2 RepliesI am working on url rewriting all is working fine on my local machine when i upload this site on production server the link of url rewrite which is extension less not work. i search the multiple solution in the google one solution is that insert the aspnet_isapi.dll in the properties->virtual directory tab->configuration->insert aspnet_isapi.dll site in working, but problem is that hosting provider refuse to add this dll. tell me alternate solution to add this dll from web.config file.
View 3 Repliesusing c# I am entering two types of string in a text box for eg "so-123456" or "12345678" only this two formats are allowed to enter, when i enter only 12345678 i.e, without "so" next textbox in that page should be enabled, if i enter "SO-123456" textbox should be disabled. without any click event i.e, while entering text in 1st textbox if it contains "so" textbox2 should be disabled, if textbox1 contains only integer(123456) textbox2 should be enabled.
View 1 RepliesI am using template field in a Gridview. I have a button in that. I also have a method which returns bool. Now I want to disable the button in the gridview if my method returns true. And enable the button if my method retuns false.
View 5 RepliesI am rather new to MVC applications, and one thing I am trying to accomplish is enabling or disabling stylesheets based on a Session value.I have stylesheets referenced in my Site.Master page in this manner:
<%=Html.Stylesheet("~/styles/main.css", "string")%>
<%=Html.Stylesheet("~/styles/additions.css", "string")%>
<% if (Session["cssRule"] = "enableCss") { %>
<%=Html.Stylesheet("~/styles/main.css", "screen")%>
<%=Html.Stylesheet("~/styles/additions.css", "screen")%>
<%} %>
So if the 'cssRule' Session value is null, no CSS loads. Currently this is working fine, but it is not exactly what I am looking for. Right now I set the Session value in the Controller when the user logs in, but ultimately I need to set the value of theSession variable depending on if a user clicks the enable or disable button.
I have a checkbox and a textbox in a GridView (for every row), and I'd like to be able to write some javascript that would enable and disable the textbox depending on the state of the checkbox (checked or unchecked). I guess I'd have to give JS the row index somehow.
View 3 RepliesI have a tab container in aspx page and i want to enable disable the last tab in aspx page my tab container is like below
[Code]....
Now for disabling the last tab i used the following in code behind page load:
//tabAdvanceSettings.Enabled = false;
I also want to enable this tab panel on client side when a user uses a shotrcut like Ctrl + Shif + A as shown below but this shortcut only enables the tab not the two user controls ptresent in the last tab. The code for enabling the last tab is :
if (e.keyCode == 65 && isCtrl == true && isShift == true) // Ctrl + Shift + A
{
$find('<%=tabContainer.ClientID%>').get_tabs()[2].set_enabled(true);
}
How can i enable the last tab and also the controls present in the last tab?
I am developing a registration process in an MVC application. The process consists of 4 steps. I would like users to be able to see where they are in the registration process. i.e. I would like them to see a breadcrumb with each step displayed. If a user is on the first step, they should see all 4 steps displayed but only the first step should be enabled. If they are in the second step, they should only see the first and second steps enabled etc. The first link would take them back to the first step. I have considered using 4 action links to implement this. Is this the best way? If so, how do I disable and enable actionlinks?
View 6 RepliesI have a tab container and three panels
<cc1:TabContainer
ID="TabContainer1"
runat="server"[code]....
In my first panel I have a asp:checklistbox, which is dynamically loaded with items ....
Eg: [Code]....
One checkbox item = "Address"
Second checkbox item = "Work Info"
When User selects and clicks on first Checkbox option Address...the second Tab is enabled
When the User Clicks on Sec Checkbox option Work Info then the third Tab is enabled .else the tabs are disabled
I was working to use JQuery and unable to achieve this
My Jquery Part of the code is like above...looks a little too complicated
How to enable / disable any record in gridview ?using mssqlI want in my gridview the following will appear ..
Name Course Year Status
Sam MCA 2010 Enable
when i click on enable then record will be displayed in gridview and the enable button will convert into text disable... and when i click on disable then the record will be disable in gridview and enable button will appear ...
I have a text box, a range validator, and a button. The validator is hooked up and prevents the button from doing a post back if the text is out of the range, however I'd also like to enable and disable the button. Is this possible to do within client-side code?
View 12 RepliesI been strugling with this for 2 days now without comming any closer to solution. I have read 20-30 threads alteast and stil can not resolve this.I have disable anonymous authentication, enable asp.net impersonation.I have added <identity impersonate = "true" />I have added the a user to the security logins that is connected to the database I try to connect tThis is the connectionstring I use:
Data Source=IPTOSERVER;Initial Catalog=Phaeton;User Id=User;Password=Password;errormessage
How do I validate RequiredFieldValidator/CompareValidator conditionally. I have aded equiredFieldValidator/CompareValidator on date textbox. I want that if textbox1="No" thne it should not validate or compare date text box, if textbox1="Yes" then it should validate.
Is this possible on form submit button or any other way?
I'm trying to set all textboxes on an ASP.NET form to disabled on Page_Load using the following:
[Code]....
I am trying to put in scripts for google analytics in my code. But I want it to run only if the environment is production and not in dev or qa. This javascript runs at page load itself and I am confused how to make it run conditionally. My app is an asp.net app.
Javascript is always confusing to me. There are many other javascripts in the page and I just need to disable this one. Had it been a .net code/function I would check for the environment and conditionally run the function. But I am confused about how to accomplish this type of functionality with javascript
I have a scenario where a RadioButtonList needs to be in disabled mode by default and then on some event on client side, say, when a checkbox is checked, it needs to be enabled.
But once I disable it from code-behind, the javascript part of enabling it doesn't work.
I have a webpage that inherits a masterpage. Within the webpage I have the content palceholder and then a table within that that contains all the controls of the page. Like below:
[Code]....
I want to be able to change the fields to readonly if a field in the database for the user says they should have readonly access. I can't seem to find the level to go to in order to loop through the controls of the page to set their access to readonly.
I have gotten down to this level and it seems like it is in the base of this.
WebForm.Page.TemplateControl
I have a grid control where i am binding list of stickers. On the above of grid , that is out side grid i have two buttons Create Sticker and Void Sticker. Sticker basically have three properties Active , Void and Expired displayed as text in column. There is condition of adding only one sticker at a time. Also if there is an active sticker then user cannot add another sticker until and unless its is expired or void.
So what i want is that whenever my grid is loaded if there is an column with text active the the create / add sticker will get disabled and void will get enabled. I am using the folloing code
/// <summary>
/// Handles the RowDataBound event of the gvSticker control.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">The <see cref="System.Web.UI.WebControls.GridViewRowEventArgs"/> instance containing the event data.</param>
/// <remarks></remarks>
protected void gvSticker_RowDataBound(object sender, System.Web.UI.WebControls.GridViewRowEventArgs e)
{
if (Session["FisherId"] != null)
{
if (e.Row.RowType == DataControlRowType.DataRow)
[Code]....
I have two days in a list. What I want is to let these two days selected in blue color and is selectable and then I want to disable all other days in the current month to not selectable.
How can I do that? Here is my code:
foreach (courseSession se in lstSe)
{
cldCourseDate.SelectedDates.Add(Convert.ToDateTime(se.nextDate));
}
I need to enable/disable roles using membership. How is it done.
View 3 RepliesI have developed toolbar which contains the First,Next,Last and Previous buttons, based on the records display the buttons needs to be changed. Now how to disable and enable the button from .cs file or by using .css file.
View 2 Replies