How To Add Detail Element To SOAP Fault Response That Works For Both SOAP 1.1 And SOAP 1.2
Jul 1, 2010
ASP.Net 2.0 Web Services automatically create both SOAP 1.1 and SOAP 1.2 bindings. Our web service, however, has SOAP extensions and custom exception handling that make the assumption that only the SOAP 1.1 binding is used (for example, the SOAP extension uses the HTTP SOAPAction header to control behavior).
I am looking to correct the code that makes these assumptions and make it work with either SOAP 1.1 or SOAP 1.2 properly. I am running into a bit of a problem in the generation of elements for our SOAP faults.
Consider the following web method implementation:
[Code]....
The SOAP 1.2 response now has the wrong qualified name for the detail element. It should be <soap:Detail>, but instead is merely <detail>, same as the SOAP 1.1 response.
It seems that the ASP.Net 2.0 framework has done quite a bit to transform a SOAPException into the appropriate form for the SOAP version, but neglected to properly handle the detail element. Additionally, they don't seem to have exposed the correct SOAP 1.2 qualified name for the detail element as was done with the SoapException.DetailElementName property.
So, what is the correct way to add a detail element to a SOAP fault response that works for both SOAP 1.1 and SOAP 1.2? Do I need to detect the SOAP version myself and hard-code the SOAP 1.2 qualified name for the detail element?
View 2 Replies
Similar Messages:
Jun 3, 2010
I use HttpRequest, when there is a SOAP fault, I get 500 error. I read that you can get the SOAP fault info in the response stream, but when there is a 500 error, how do you get the response stream?
View 1 Replies
Mar 3, 2011
Can anyone explain how many ways we can consume web service? How SOAP works in WebService?
View 2 Replies
Jan 22, 2010
I have a SOAP webservice. One method has a return type of XmlDocument. I then sent this service to guys that need to consume it. And this is there response: I see the web service returns and xml string. Why not just wrap the results in the web service response itself? what he means by that? I have asked, but I have received no reply from him yet. That I can make it return proper XML and not XML formatted string?
View 4 Replies
Feb 4, 2011
I am new to the wcf services and soap. Kindly give me an example or demo how to generate a soap request and response using wcf services. I need to use VB.net for this.
View 2 Replies
Feb 13, 2011
I'm trying to implement a custom SOAP response of the legacy web service. At the moment it has the following format:
<ServiceResponse>
<ServiceResult>some return value</ServiceResult>
</ServiceResponse>
I need to add string value like this:
<ServiceResponse>NEW VALUE
<ServiceResult>some return value</ServiceResult>
</ServiceResponse>
I'm not sure if it is a good idea at all? Is this SOAP xml valid? If yes, how it can be accomplished?
View 1 Replies
May 31, 2010
I am developing a web application which uses a third party Web service. It requires Username & Password in SOAP Header request. I am passing those credentials well and the web service returns an XML string in Response and also a SESSION ID in the SOAP Header.
I don't know how to read/access the soap header from the response sent from the web service.
View 2 Replies
May 10, 2010
This question seems to be pretty close to what I am looking for - I was able to setup tracing and I am looking at the log entries for my calls to the service.However I need to see the raw soap request with the data I am sending to the service and I see no way of doing that from the SvcTraceViewer (only log entries are shown but no data sent to the service) - am I just missing configuration?
<system.diagnostics>
<sources>
<source name="System.ServiceModel"
switchValue="Verbose"
propagateActivity="true">
[code]...
View 1 Replies
Feb 3, 2011
When I call a webservice function through WSDL, my response when catched through application does not match with TCPMon tool. Is there a way that I can catch the response before it even reaches the application.
View 1 Replies
Jan 6, 2011
I have an application that is using a traditional web reference (not WCF service reference). I'd like to capture the request and response SOAP envelopes being processed for my referenced service (under the hood). I know how to do this with custom behavior using WCF, but how do I do this using a traditional web reference?
View 1 Replies
Jul 19, 2010
In my ASP.Net (2.0) Web Service implementation (The implementation class derives from
System.Web.Services.WebService with WebServiceBinding confirming to WsiProfiles.BasicProfile1_1 .
The SOAP response sent out by the Service has two elements missing :
1> The XML header itself : (<?xml version="1.0">)
2> The opening and closing Envelope tags with NameSpace ("<S:Envelope xmlns:S=http://schemas.xmlsoap.org/soap/envelope/>" and "</S:Envelope>" ).
This results in "breaking" of my client unless the above mentioned headers are inserted at the client end, and my intent is to avoid bypasses at the client end as far as popssible.Is this the default behavior ?
View 2 Replies
Mar 22, 2010
I've trying to use the API for CapsuleCRM... [URL] I've been reading some articles on SOAP in asp.net and I just don't get it. Most of them seem to be ablut creating a web service, not using it and none of them seem to explain how to use basic HTTP authentication. I have got as far as constructing the XML i want to send to the API but I could really do with seeing some example code which makes an http call using http authentication to a SOAP API.
View 1 Replies
Jun 19, 2010
What is the namespace used for in a SOAP web service?
View 3 Replies
Feb 16, 2011
I am using web services in my applcation. I know when calling webservices the soap is created.
My requirement is to create soap sub header below like using vb.net code. Is it possible?
<SubHeader>
<username>sasi</username>
<password>infot</password>
</SubHeader>
View 3 Replies
Apr 1, 2011
I have to consume a public service with the following properties
1. SSL is used as Transport Level Security.
2. User credentials are used for Authorization and Message Level security
NOTE : Source Code is not available for the service.
Sample URL - [URL]
How do I consume from ASP.NET and call the exposed methods ?
View 1 Replies
Nov 26, 2010
How do I consume this SOAP web service? how do I add the request header?
[URL]
[URL]
View 1 Replies
Feb 19, 2010
I need to sign my soap request to a 3rd party. The provided an example what the call should look like. And I am trying, rather unsuccessfully to make this call with wcf. I need to make a wcf soap call where the header contains BinarySecurityToken, Signature, and SecurityTokenReference. Here is the example they sent me (with some of the values omitted) I have a certificate for signing, but I cant for the life of me figure out how to make this work
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Header><wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:BinarySecurityToken EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="SecurityToken-..omitted.." xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">..omitted..</wsse:BinarySecurityToken>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
<ds:Reference URI="#Body">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<ds:DigestValue>..omitted...</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>
..omitted..
</ds:SignatureValue>
<ds:KeyInfo><wsse:SecurityTokenReference><wsse:Reference URI="#SecurityToken-..omitted.." ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/></wsse:SecurityTokenReference></ds:KeyInfo></ds:Signature></wsse:Security></soapenv:Header><soapenv:Body wsu:Id="Body"><in0 xmlns="http://test.3rdParty.com">123</in0></soapenv:Body></soapenv:Envelope>
View 1 Replies
Apr 6, 2010
How to get the raw SOAP request from within a WebMethod?
public class Service1 : System.Web.Services.WebService
{
[WebMethod]
public int Add(int x, int y)
{
string request = getRawSOAPRequest();//How could you implement this part?
//.. do something with complete soap request
int sum = x + y;
return sum;
}
}
View 3 Replies
Apr 5, 2010
I'm pretty new to SOAP so go easy on me. I'm trying to setup a SOAP service that accepts the following header format:
<soap:Header>
<wsse:Security>
<wsse:UsernameToken wsu:Id='SecurityToken-securityToken'>
<wsse:Username>Username</wsse:Username>
<wsse:Password>Password</wsse:Password>
<wsu:Created>Timestamp</wsu:Created>
[code]...
View 1 Replies
Jul 1, 2010
I have a web service I'm converting it to wcf
I want to create a couple methods in the wcf... these will call methods in the web service
but I don't want to use soap or whatever because it is so slow
So I made a WCF service inside my web project.
Then I new up the web service and call a method...
Is it using soap? Is this just the same as calling any other method in the code? Just as fast?
View 2 Replies
Nov 8, 2010
I wrote a webmethod (Called SearchData()) in which the method makes a httpwebrequest to another url and gets the data in xmldocument. After getting the xmlDocument ,it is returned to SearchData method invoker. When i invoke the from browser it works fine. But When another application in java tries to consume this webmethod SearchData(), it is getting the error
<wsdl:part name="Body"/>
and each part should be type defined. The WSDL file is not well formatted. it doesn't have Type defined at each element. How to fix this.or Is there any other Better way to provide the end user the xml(ie from httpwebrequest result in webmethod ) with a soap wrapper ie with a well defined wsdl. My code :
[Code]....
View 1 Replies
Feb 15, 2011
I'm using a webservice for render company information based on a special company number.But i can not get data out of the response SOAP message. You can see an example of the response soap message. (I left out some company information the tags).
[Code]....
! this is the result i see on the demo client ! But this is my code in C#
nl.webservices.ws1.BusinessDossierV3PagedResult result = null;
result = myserviceBusiness.businessGetDossierV3(KVKnr, "0000", 1);
I want to do something like this (but with the results instead of paging part)
int page = result.paging.numpages;
Then I should be like this I suppose
string city = result.results.item.CorrespondenceCity;
But this is giving a fault message
So in Visual studio 2010, i can only retrieve the data in the paging part of the xml and put it into a textbox, but not from results part. Is this because the result part is some kind of Collection?
So yes, how can i put the data from the tags EstablishmentPostcode and EstablishmentCity in a textbox on my default page?
View 1 Replies
Jan 21, 2010
So I'm using the PayPal API. They require bigger companies to send an X509Certificate along with each SOAP API request. I've never heard of using a cert, it's always been just send the API signature along with an API request.
So I first created a class called
[Code].... that implements the .NET
[Code]....
One of the member methods, really the only one you have to implement is:
[Code]....
So far I'm having trouble really understanding what to pass to this method. I guess the method simply validates that the Cerfiticate is valid. So I'm not sure what ServicePoint is and what to pass into it. I assumed it was my web service reference and a proxy class within such as the
[Code].....................
View 2 Replies
Aug 6, 2010
I am trying to call a webservice, written in PHP from ASP.Net. I have added Web Reference using "Add Web Reference". The url is: http://mikikard.com/public/webservice?wsdl
In Add Web Reference Window, I can see the list of functions. But, When I try to build the Website, It gives the following Error:
Unable to import binding 'SoaptestBinding' from namespace 'http://mikikard.com/public/webservice'.
View 1 Replies
Jan 24, 2011
I'm consuming an external web service (yahoo adverts), and what I need is capture the SOAP XML request I'm sending and response I'm getting.
I tried using Fiddler, but wasn't able to capture the request. how to do this?
View 5 Replies
