C# - Setting PDF File Name Dynamically?
Nov 23, 2010
I have an ASP.NET page that dumps out PDF files for the users with the following code:
Response.ContentType = "application/pdf";
Response.AppendHeader("content-disposition", string.Format("inline; filename={0}", getFileName(DateTime.Now)));
The reason why I use "inline" instead of "attachment", so I can force the users to view the PDF directly in the browsers instead of opening up the acrobat to view the PDFs. Everything is fine so far, but when users want to save a file, the file name which should be set to "getFileName(DateTime.Now)", instead it just takes the name of the page like myPDFpage.pdf.
Is there anyway, without setting the content-disposition to "attachment", for the users to save the file with the name I specify with the getFileName() method?
View 2 Replies
Similar Messages:
Jul 21, 2010
have a website which as far as I know has the following timeout settings:1) In Web.config, FORM's authentication timeout="10"2) In Web.config, MEMBERSHIP's userIsOnlineTimeWindow="10"3) Assigned in Global.asax on Session_Start(): Session.Timeout =10;In the past I had problems because at least 1) and 3) weren't in sync, not sure about 2).
Do these 3 have to be in sync and if so, is there a way to set the timeout once and to have it applied to all 3? I deploy my website to many clients and each may want a different timeout, so I'm looking for a dynamic method to set this, perhaps after loading the timeout period from the db or settings file.
View 6 Replies
Mar 18, 2011
i have a web service published in the server, which is accessed by others. In this case if the webservice path is changed it cant be accessed. so hw can this be handled. even if i chng the publish fldr the people using it wont be affected.
View 2 Replies
Nov 17, 2010
I have a user control in asp.net that i need to dynmically set properties for. The propety and property values are in a dictionary, for example:
Dictionary<string, string> propertyValues;
Control c = Page.LoadControl("~/Control.ascx")
I can currently set the properties on the control using reflection, however, with .net 4 and the new dynamic keyword, is there an easier way to do it, for example, something like this:
dynamic c = Page.LoadControl("~/control.ascx");
foreach(var itemin propertyValues)
{
c.item.key = item.value;
}
this obviously doesnt work because item.key is a string and not a property.
View 1 Replies
Aug 26, 2010
is it possible to render the same controls with different ID property ?
<%for (int i = 0; i < 15; i++)
{%>
<asp:Label ID='Label<%=i.ToString() %>' runat="server"/>
<%}%>
here is an error: 'Label<%=i.ToString() %>' is not a valid identifier.
View 1 Replies
Feb 25, 2011
How to set proprety for List dynamically. I have a WebPage class having properties. strNodeName is one of the property of this class which is the parameters of method. I want to set the string strTitle according to the parameter strNodeName i.e., set
strTitle = _list[i].Title.ToString();
I want Title to be the strNodeName.
Like if strNodeName = Author, then
strTitle = _list[i].Author.ToString();
if strNodeName = CoAuthor, then
strTitle = _list[i].CoAuthor.ToString(); 
Below is my code.
[Code]....
View 2 Replies
Feb 14, 2011
I have two login control in the index page of my website,each of two different usertypes. there are two user types brands and creatives.the branded user will log in to brands bin(brandsbin.aspx) the Creative user will sign in to creativebin(creativebin.aspx) i am using forms authentication for signin. so i am confused here to to rediret to default path for each user types. how to set default page for each user types. in the web config file i have added like this
<authentication mode="Forms">
<forms name="forms" loginUrl="Index.aspx" defaultUrl="brandsbin.aspx" path="/" timeout="15" slidingExpiration="true"></forms>
</authentication>
View 1 Replies
Aug 2, 2010
I have a vb.net web site. Currently it is generating reports via ReportViewer. The datasouce for the all reports is set at the deploying of the report.
ReportViewer is configured in the aspx page
<rsweb:ReportViewer ID="myReportViewer" runat="server" ShowParameterPrompts="true"
ZoomMode="Percent" Height="1100px" Width="1000px" BorderWidth="1">
</rsweb:ReportViewer>
I am setting up the ReportViewer using the following code.
Dim _cred As New ReportServerCredentials(Session("_ApplUser"), Session("_ApplPswd"), Session("_ApplDom"))
'Set the processing mode for the ReportViewer to Remote
myReportViewer.ZoomPercent = 100
myReportViewer.Width = Unit.Percentage(100)
myReportViewer.Height = Unit.Percentage(100)
myReportViewer.ProcessingMode = ProcessingMode.Remote
Dim _SrvRpt As ServerReport
_SrvRpt = myReportViewer.ServerReport
_SrvRpt.ReportServerCredentials = _cred
'Set the report server URL and report path
_SrvRpt.ReportServerUrl = New Uri(Session("_RSConn"))
_SrvRpt.ReportPath = Session("_RSFold") + _rr.Report_Path
myReportViewer.ServerReport.Refresh()
lblTitle.Text = _rr.Report_Title
myReportViewer.ServerReport.Refresh()
myReportViewer.Visible = True
What I want to do is dynamically set the datasource for a report at runtime. That is, I have 2 datasources already configured in my Report Manager. I want to have the vb.net pick which datasource based on a enviornment variable. So, if Env 1, then use Datasource 1 in the Report Manager. Of Env 2 then use Datasource 2 in the Report Manager. I have seen what looks like software for doing this Locally but no for Remote.
View 5 Replies
Feb 18, 2011
I have an aspx page which has 5 text controls as follow:
<asp:TextBox id="txtStudent1" runat="server" textmode="SingleLine"></asp:TextBox>
<asp:TextBox id="txtStudent2" runat="server" textmode="SingleLine"></asp:TextBox>
<asp:TextBox id="txtStudent3" runat="server" textmode="SingleLine"></asp:TextBox>
<asp:TextBox id="txtStudent4" runat="server" textmode="SingleLine"></asp:TextBox>
<asp:TextBox id="txtStudent5" runat="server" textmode="SingleLine"></asp:TextBox>
How can i set new text to each of these controls dynamically in .cs
WITHOUT explicitly doing something like this:
txtStudent1.text = "freshment";
txtStudent2.text = "Sophomore";
txtStudent3.text = "junior";
txtStudent4.text = "senior";
txtStudent5.text = "grad";
Can I use the for loop and increment the digit in the text control when setting its text?
ex:
For (int i=0; i<5; i++)
{
"txtStudent" + i .....
}
View 4 Replies
Aug 4, 2010
I want to set the confirm text button dynamically in a situation where the user is entering some text into a TextBox control e.g. their social security number. I'd like to display a message saying "Are you sure XXX-XX-XXXX is your social security number?"How do I pick up the text entered into the TextBox control and use it in the ConfirmText?
View 2 Replies
Jun 10, 2010
[Code]....
View 5 Replies
Nov 16, 2010
We have a lot of domains running on one IIS WebSite/AppPool.
Right now we are in the process of implementing SSO with Windows Identity Foundation.
in web.config the realm has to be set with
<wsFederation passiveRedirectEnabled="true" issuer="http://issuer.com" realm="http://realm.com" requireHttps="false" />
My problem is that the realm is dependent on which domain the user accessed the website on so what I did is that I set it in an global action filter like this
var module = context.HttpContext.ApplicationInstance.Modules["WSFederationAuthenticationModule"] as WSFederationAuthenticationModule;
module.Realm = "http://" + siteInfo.DomainName;
My question is. When I set the realm like this, is it set per user instance or application instance.
Scenario.
User A loads the page and the realm get set to domain.a.com.
User B is already logged in on domain.b.com and presses login.
Since user A loaded the page before User B pressed login, user A will hit the STS with the wrong realm set.
What will happen here?
If this is not the way to set the realm per user instance, is there another way to do it?
View 1 Replies
Nov 15, 2010
i have a setup.aspx page where in i select the theme with buttons so if i click on a button the theme should reflect in all of my pages of project.so how can i write the code do i need to call it in each page.how can i set the initial page to do so.
View 7 Replies
Mar 29, 2011
i am setting the gridview headers backcolor dynamically
if (!Page.IsPostBack)
{ buildGrid(); gvTeamGameSeries.HeaderStyle.BackColor = Color.FromName("red"); }
however everytime i reload the page,backcolor disappears.If i move it out from IsPostBack block ,it works fine but i want to load grid only when the page loads for first time(inside !Page.IsPostBack).
View 8 Replies
Jul 22, 2010
Is tehre anyway to set the HeaderText dynamically on a gridview? I'm trying the below, it kind of works, but the problem is on the initial load nothing shows up, but when I postback then the new text populates:
grdvMyTest.HeaderRow.Cells[5].Text = GetTheCalculatedDate();
I've tried that in both Page_Load and grdMyTest_Load, but same thing happens in both. When the page initial loads the column header text is blank, when I click something causing a postback it pops up. I don't have a IsPostBack check around that line, so it should be running regradless. I'm guessing I'm doing it at the wrong event, either too eariler or too late.
View 2 Replies
Jan 6, 2010
[Code]....
Once the template is loaded and cast back to the TabHeader class, it's null. How can I load that control, set the properties, and use it as the template? Or is the only way to go about doing this to create a custom class?
View 2 Replies
Jan 9, 2010
In the datapager, is there any way to set the NextPageText and PreviousPageText properties dynamically so the NextPageText is set to the title of the the next story in the dataset?
View 1 Replies
Aug 16, 2010
I'm currently developing a localized control which works as a wrapper for the default ASP.NET Login control.
This is my .ascx file:
[Code]....
Problem is, I have to set dynamically from CodeBehind the LogoutText attribute. I tried basically two things:
1. Declaring the Asp:LoginStatus normally in the .designers.ascx.cs file and setting the LogouText attribute's value runtime like this:
[Code]....
... but this does not seem to work since the LoginStatus control is declared into a LoginView control.
2. Setting the value using late bounds, but this fails since to retrieve the loginstatus i have to do such thing:
[Code]....
... but this fails too because late bound removes early references, so i cannot logout the user anymore since the runtime finds a duplicated LoginStatus control and cannot understand which is the right one, or at least i guess so.
I tried to check if someone had the same problem in the past and i found a couple of reports stating that i cannot do such thing like setting attributes runtime for nested controls.
Maybe i'm just missing something, but before throwing everything and setting that attribute statically in the .ascx i would like to make sure.
View 3 Replies
May 25, 2010
I'm trying to set up a simple content management system for two different sites, which are both stored on the same server (my own, not hosting, if it matters:)).
Both sites are basically the same, built upon a similar (but seperate) xsd (Typed DataSet) file, and read data from different databases using the tableadapters in the xsds.
Obviously, i have the same xsd setup in my management system application that need to hook up to the relevant database (after user authentication) and use the tableadapters to access the data and allow the forms in the management system to modify the data.
When i had a single site, the connection string was stored in the web.config file and after logging in to the management system, all forms could access the database.
Now i have two site and i need to setup the connection string in the xsd dynamically after user validation based on the relevant site to edit.
My question is, how do i set the xsd's connection string dynamically (after user logs in, the function returns the specific connectionstring and stores it in a Session variable)
View 3 Replies
Aug 8, 2010
Is it possible to set the connections string dynamically in the health montitoring section of the web config?
View 1 Replies
Jun 18, 2010
[Code]....
I am adding linkbutton dynamically (actually above snippet tells what I am actually doing, in reality TableRow and TableCell are added dynamiccally). My problem is, I am not setting height of linkbuttuon which will added dynamically. I have no idea what text I have to add to linkbutton.
What I want, after all the link buttons are added, iterate through each added lin button, get the height of each linkbutton, store the max height, then re-iterate throgh the link buttons and set the height of each link button to max height.
View 5 Replies
Mar 5, 2010
I have one requirement that i have to place the log file in the same directory of solution. That is my solution is placed in [drive]workProject1solution file. But i have to create my log file to [drive]workProject1Loglog.log. How it can be set in app.config file.
View 1 Replies
Jan 28, 2011
I have converting some pages into the PDF/Documents.
My requirement
1)Generate dynaimaclly document (Done already)
2)Save the file (Not done)
3)Mail the saved files as an Email to the user (Not done)
View 3 Replies
Jan 3, 2010
is it possible to add more then one file name in app settings.??if so,how to work around with second file.?..i currently have one file listed in app setting,
<appSettings
file="list.config"
>//i need to add another file here with values??????
<add key="key1" value="a"></add>
<add key="key2" value="b"></add>
<add key="key3" value="c"></add>
</appSettings>
View 4 Replies
Mar 3, 2010
I am trying to modify a .ascx file, to declare a variable. I've read that this is normally done in the code behind view, but I do not have access to the code behind, and this is a very small addition. We are using DotNetNuke, and in the .ascx file I have written
<script runat="server">
String foo = "bar";
</script>
And this causes the page to explode. I have some experience with PHP, but am very new to .NET. Is there a way to define a variable in a .ascx file in this way? Maybe I have not imported all the correct libraries at the top of the page?
View 7 Replies
