is it possible to render the same controls with different ID property ?
<%for (int i = 0; i < 15; i++)
{%>
<asp:Label ID='Label<%=i.ToString() %>' runat="server"/>
<%}%>
here is an error: 'Label<%=i.ToString() %>' is not a valid identifier.
Is tehre anyway to set the HeaderText dynamically on a gridview? I'm trying the below, it kind of works, but the problem is on the initial load nothing shows up, but when I postback then the new text populates:
grdvMyTest.HeaderRow.Cells[5].Text = GetTheCalculatedDate();
I've tried that in both Page_Load and grdMyTest_Load, but same thing happens in both. When the page initial loads the column header text is blank, when I click something causing a postback it pops up. I don't have a IsPostBack check around that line, so it should be running regradless. I'm guessing I'm doing it at the wrong event, either too eariler or too late.
In the datapager, is there any way to set the NextPageText and PreviousPageText properties dynamically so the NextPageText is set to the title of the the next story in the dataset?
View 1 RepliesI'm trying to set up a simple content management system for two different sites, which are both stored on the same server (my own, not hosting, if it matters:)).
Both sites are basically the same, built upon a similar (but seperate) xsd (Typed DataSet) file, and read data from different databases using the tableadapters in the xsds.
Obviously, i have the same xsd setup in my management system application that need to hook up to the relevant database (after user authentication) and use the tableadapters to access the data and allow the forms in the management system to modify the data.
When i had a single site, the connection string was stored in the web.config file and after logging in to the management system, all forms could access the database.
Now i have two site and i need to setup the connection string in the xsd dynamically after user validation based on the relevant site to edit.
My question is, how do i set the xsd's connection string dynamically (after user logs in, the function returns the specific connectionstring and stores it in a Session variable)
Can I dynamically create controls in Silverlight without a postback to the server (even an asynchronous one). Does silverlight drag-n-drop requires postback?
I'm asking this because I've an asp.net application where I dynamically create/delete lots of controls. So after the postback I'm getting error with view state stating that the control tree doesn't match the view state tree.
Can I avoid such problems in Silverlight?
I have a GridView with a column of checkboxes. I also have a panel pnlSubmitOffer which serves as a modal dialog with ajaxToolkit:ModalPopupExtender:
[Code]....
I need a set of controls (text boxes and datetimepickers) to appear on the modal dialog based on how many checkboxes in the GridView are checked, i.e. a set for each checked record. Thus the controls should be added to the panel dynamically. But I don't know how to do it, as btnSubmitOffer click is not handled, because the modal dialog appears first. I was told that the controls can be added dynamically using javascript, but my knowledge of it is not enough.
I have a requirement in which i want to create an aspx form in which I want to define the name of the controls in the xml file and on the basis of the xml file i want to create the aspx form. if in the xml form there are 10 controls then dynamically 10 controls will be created i have following type of xml
[Code]....
I have a dropdown list on my homepage which users select a category. After selecting the category, user will fill a form which has related controls to that category in it.
As I have many categories, I just want to have single ascx page and adding controls to it dynamically according to the user choice.
For example: One chose Telephone category, he will face a form having drop down lists asking, what brand? what color? And one chose, book category, he will face drop down lists asking which type? howmany pages?
So 1 ascx must do my work at runtime done as I have alot of categories.
I am going to take these criterias from a database table which has CategoryID and Criteria colomns.
And if I can do that, will it be possible to add field validators to these dynamically created controls.
[Code]....
I am adding linkbutton dynamically (actually above snippet tells what I am actually doing, in reality TableRow and TableCell are added dynamiccally). My problem is, I am not setting height of linkbuttuon which will added dynamically. I have no idea what text I have to add to linkbutton.
What I want, after all the link buttons are added, iterate through each added lin button, get the height of each linkbutton, store the max height, then re-iterate throgh the link buttons and set the height of each link button to max height.
Never really worked with the asp tables but for this project it makes more sense, I am having trouble addding rows dynamically from the sql datatable i am pulling. In hte datatable it has 12 rows with 14 columns, I need to make this into a table, with a dtagrid I would be done but I have to pull other data that they could add columns, so a table I am told is easier.
This gets my data and I can see it
mydataTable = new DataTable
mydataTable = GetData(sql)
mydataTable.add.row(myDataTable.rows(0)(0))
I get nothing but errors trying to do this, what is the correct way to add rows to an asp.net table
Can I add this all to a datagrid and then add the extra columns I need if they are there with out using a table.
It seems when I try to dynamically create multiple instances of a User Control, I get an Object Reference Not Set To An Instance Of An Object error on any ASP control that I'm using in that User Control
Here's the class where I'm creating them.
[Code]....
Am I able to successfully refer to a panel on the page that I'm calling this routine from simply by ByVal ... As Panel, or should I use HttpContext?
I want to create DateGrid dynamically pepending on the data comming from database.
View 4 RepliesI have created a control with two standard asp controls in (a label and a Textbox).I want to have access to the controls within but also be available from the designer so that the label properties can be prefixed with Label_ etc for example
[Code]....
How can I create a property from this reflection list?
<Bowyer:FormTextbox runat="server" ID="FormTextbox2" required="True"/>[Code]....
apologies beforehand for what can possibly be a daft conceptual question. I have an ascx control that has a bunch of ASP labels and buttons in the ascx page and some other public methods and properties in the code behind. When I drop this ascx control in a page it all works fine. I now have a page with a placeholder and I am trying to dynamically create an instance of my ascx control and put it there. I then reference this control in code and while all public methods and properties are available (ie MyControl.TitleString = "Hello";MyControl.DoSomething();) none of the ASP controls are. Rather, they are all null. So MyControl.buttonSave is null, MyControl.LabelTitle is null, etc. Is this by design? Am I missing something? If not, what's the point of being able to create dynamically do this?
View 8 RepliesI want to create columns in gridview dynamically based on rows in a table and each gridview colum should have a checkbox. When I Click the save button, I want to save the checkbox state. How Can I do this ?
View 2 RepliesI am dynamically creating initial rows and cells in a asp:table on Page Load, whose cells need to have embedded user controls.
I have an Add Row button, where in, whenever I click I need to add rows to existing table and also persist viewstate of the user controls already added earlier to cells during initialization.
When I click on Add button, the controls disappear. how to recreate tables with their embedded user controls and populate the viewstate.
This is the basic piece of code I have currently and I am stuck -
[Code]....
how to create a dropdown list dynamically from a database table. Something like:
OdbcCommand sqlcommand6 = new OdbcCommand("select vehicle_cat_desc from vehicle_cat where vehicle_cat_desc=" + "'" + manufacturer.Text + "'", dbConnection);
OdbcDataReader cats = sqlcommand6.ExecuteReader();[code]....
Using C# and SQL server. I need to dynamically format a web page which is intend for reporting. I have 2 SQL tables. Projects ( Project ID and Project Name) and Subprojects ( SubprojectName, ProectID, EmployeeName, Decription). Subprojects are linked to the projects throughthe ProjectID field
Needed format;
Employee Name
All the project for that EmployeeName
All the SubProjects for that EmployeeName undre the given project + Description of the subproject
Eg:
Peter
Project A
SubProject AA <subProject AA Description >
SubProject AB <subProject AB Description >
SubProject AC <subProject AC Description >
Project B
SubProject BA <subProject BA Description >
SubProject BB <subProject BB Description
ANN
Project C
SubProject CA <subProject CA Description >
SubProject CB <subProject CB Description >
How can I achieve this?
I have to show progress bar in datalist and having following scenario:
I am collecting response for the questions For each answer, total no of responses and their respective Percentage(%) is calculated
Now I have to show this % progress in progress bar
means if a answer have 100% response then progress bar show 100% (100% filled) if it have 50% response then only half of progress bar is filled (50% filled)and so on. response is calculated upto one decimal places(like it can be 33.3% or whatever)and respective % have to be shown in progress bar
So I have to create progress bar dynamically for each response %
How to display % in progress bar, I am using asp.net 2.0 with C#..
Setting role when creating new user with ASP.net MVC
I am looking at the default ASP.net MVC 2 controller.
How do I set the role for the new user that is created in the Register method?
Is this possible with just a simple property set or do I have to do something special?
I've an item template inside a grid which has a <asp:LinkButton/> inside it. I assign the text for the link button as
<%# Convert.ToString(Eval("Tags"))%>
Tags can have a string with multiple tags in it delimited by space. For eg. "sports", "sports cricket", "sports cricket sachin" are the examples of some possible tags.
I want to create a button for each tag inside the string. How can i create the controls (server control - linkbutton) dynamically during runtime inside the grid item template?
i wanna creating a gallery in my website by using datalist,
but i getting images statistically,
i wana get it dynamically,
I have written some code to dynamically generate template columns for gridview which works well. However, each cell in the gridview has to be a linkbutton, which when clicked does a db update and redirects to a specific url with some parameters in it.
I have attached a click event handler to the linkbutton in the InstantiateIn method but the event does not seem to fire.
//Dynamically creating the Grid
protected void btnAnalyze_Click(object sender, EventArgs e)
I am stuck in chart controls...Here is my prob... There is a ListBox containing some items...when user selects multiple items from the list box I want to generate a dynamic table with the number of columns same as that of the number items selected in the listbox. And for each selected item I want to show a seperate chart in the columns...Currently I want the same chart control for every selected item (i.e. a static hard coded chart that i will replace later by dynamic values)....I am using a method that draws a chart control using a sample dataset... I am calling it each time when a new column is created..Also the DrawChart method executes for the first column only and throws an index out of range exception! after the first execution...my code is not working...here
my code...
[Code]....
[Code]....
I can't seem to find anything on how to edit the data editor settings before umbraco 6.2 (Juno). Is there any simple way, it must be possible. If you don't understand what i mean i want to do the same as [URL]
View 2 Replies