My function isn't returning anything - strReturn is empty:
[Code]....
When I execute this stored proc using 'exec GetMerchantLocationZip (3333, 373773)' I get the correct zipcode in SQL. Why don't I get it in Visual Studio?
[Code]....
I am learning, so apologies if it's a obvious error.
I have a stored proc. that returns the USL & LSL values for each of the 8 different Metrics. say, Defect Density (Upper Specification Limit) USL = 0.30 & Defect Density (Lower Specification Limit_ LSL = 0.05). Simillarly for 8 different Metrics. Why I need these Spec. Limits ?...Because I want o compare my project's Metrics Value displayed in the Grid View with the corresponding USL & LSL value of the same Metrics. IF Metrics Value is outside of USL & LSL Then I want to Mark the Metrics in Red Color.
1. STORED PROC "Get_Spec_Limits" Does Not Return Anything
2. Error : Object Reference Not set to an Instance of an Object, in the following "OnRowDataBound' Event
OnRowDataBound="GridView1_RowDataBound"
Protected Sub GridView1_RowDataBound(ByVal sender As Object, ByVal e As GridViewRowEventArgs) Handles GridView1.RowDataBound
Dim strConnection As String = "Data Source=******;Initial Catalog=Metrics;Integrated Security=True"
Dim objConnection As New SqlConnection(strConnection)
Dim da As New SqlDataAdapter("Get_Spec_Limits", objConnection)
da.SelectCommand.CommandType = CommandType.StoredProcedure
Dim Productivity_USL As New SqlParameter("@Productivity_LSL", SqlDbType.Float)
Dim Productivity_LSL As New SqlParameter("@Productivity_LSL", SqlDbType.Float)
Dim IDD_LSL As New SqlParameter("@IDD_LSL", SqlDbType.Float)
Dim IDD_USL As New SqlParameter("@IDD_USL", SqlDbType.Float)
Dim EDD_LSL As New SqlParameter("@EDD_LSL", SqlDbType.Float)
Dim EDD_USL As New SqlParameter("@EDD_USL", SqlDbType.Float)
Dim DRE_FS_LSL As New SqlParameter("@DRE_FS_LSL", SqlDbType.Float)
Dim DRE_FS_USL As New SqlParameter("@DRE_FS_USL", SqlDbType.Float)
Dim DRE_TS_LSL As New SqlParameter("@DRE_TS_LSL", SqlDbType.Float)
Dim DRE_TS_USL As New SqlParameter("@DRE_TS_USL", SqlDbType.Float)
Dim DRE_Code_USL As New SqlParameter("@DRE_Code_USL", SqlDbType.Float)
Dim DRE_Code_LSL As New SqlParameter("@DRE_Code_LSL", SqlDbType.Float)
Dim COQ_USL As New SqlParameter("@COQ_USL", SqlDbType.Float)
Dim COQ_LSL As New SqlParameter("@COQ_LSL", SqlDbType.Float)
Dim COPQ_USL As New SqlParameter("@COPQ_USL", SqlDbType.Float)
Dim COPQ_LSL As New SqlParameter("@COPQ_LSL", SqlDbType.Float)......................
i'm a total newbie with asp.net mvc and here's my jam:
i have a 3 level list box which selection on box A shows options on box B and selection on box B will show the options for box C.
I'm trying to do the whole thing in asp.net MVC and what i see is that the nerd dinner tutorial uses the ORM method.
so i created a dbml to the database and drag the stored proc inside. i create a datacontext object but i don't quite know how to connect the result from the stored proce which should be multiple rows of data and make it into a json. so i can keep all the json data inside the html page and using jquery i could make the selection process faster. i don't expect the data inside the three boxes to change so often thus i think this method should be quite viable.
Questions:
So how do i get the stored proc part
to return the data as json?
i've noticed some tutorial online
that the json return result part is
at the controller and not at the
model end.
Why is that?
Edit
FYI, i find what i mostly wanted to do here.
For the json part, i referenced here.
i have two stored procs. when th 1st stored proc runs i want to be able to use this value returned from the stored into another stored proc.
my first stored proc is:
[Code]....
which returns [Transfer_stations_Authority_name] = 'Blackpool'
now i want to use this value into my second stored proc@
[Code]....
[Code]....
I am attempting to execute a stored proc in asp.net in the code behind. The parameter I am trying to pass is strErrorMessage that contains a value of "The transport failed to connect to the server.; ". The error message when the query gets executed is: The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 1 ("@errMessage"): Data type 0xE7 has an invalid data length or metadata length. Update with code
try
{
...
...
...
}
catch (Exception ex)
{
ClientScript.RegisterStartupScript(GetType(), "alert", "alert('Email was not sent - " + ex.Message + "');", true);
string strMessage = ex.Message;
string strStackTrace = ex.StackTrace;
strMessage = strMessage.Replace("
", "; ");
strMessage = strMessage.Replace(" ", "");
strStackTrace = strStackTrace.Replace("
", "; ");
strStackTrace = strStackTrace.Replace(" ", "");
AppErrorLog(strMessage, strStackTrace);
return false;
}
protected void AppErrorLog(string strErrorMessage, string strErrorStackTrace)
{
SqlConnection conErrLog = new SqlConnection(strConn);
string sql = "usp_AppErrorLog_AddRecord";
SqlCommand cmdErrLog = new SqlCommand(sql, conErrLog);
conErrLog.Open();
try
{
cmdErrLog.CommandType = CommandType.StoredProcedure;
cmdErrLog.Parameters.Add(new SqlParameter("@errMessage", SqlDbType.NVarChar, 8000));
cmdErrLog.Parameters["@errMessage"].Value = strErrorMessage;
cmdErrLog.Parameters.Add(new SqlParameter("@errStackTrace", SqlDbType.NVarChar, 8000));
cmdErrLog.Parameters["@errStackTrace"].Value = strErrorStackTrace;
cmdErrLog.Parameters.Add(new SqlParameter("@userID", SqlDbType.VarChar, 12));
cmdErrLog.Parameters["@userID"].Value = User.Identity.Name;
SqlDataAdapter ada = new SqlDataAdapter(cmdErrLog);
cmdErrLog.ExecuteNonQuery();
}
catch(Exception e)
{
ClientScript.RegisterStartupScript(GetType(), "alert", "alert('AppErrorLog - " + e.Message + "');", true);
}
finally
{
conErrLog.Close();
}
}
The column datatype in the table is nvarchar(MAX).
i have the following stored proc that inserts data into a database based on a stauts field. the first stored proc inserts into the first table and i am trying to get the identity field out as i need this value for the next stored proc. the first stored proc works fine and inserts the data but the secnd one doesnt, even though there is data there.
[Code]....
I am trying to pass stored procedure from a controller to view. In my Home controller, in Index method, I have this. CustOrderHist is my stored procedure from northwind database.
public ActionResult Index()
{
DataClasses1DataContext dc = new DataClasses1DataContext();
var products = dc.CustOrderHist("ALFKI").GetEnumerator();
return View(products);
[Code]....
I have a stored proc that takes a bit long to run. I tried to do this command.CommandTimeout = 200;still gets time out within 200 secs.How is this done?
View 1 RepliesI have written a stored proc for raise error.Whenever a customer checks for a record in the DB that doesn't exist in the DB he has to get an error displayed.I have written a stored proc help me on it i know it is wrong suggest me the correct one.
[Code]....
DECLARE
CUR_EMP_BIR REF CURSOR;
BEGIN
dbname.EMPLOYEE_P.EMPLOYEEBIRTHDAYSEL ( CUR_EMP_BIR );
END;
ORA-06550: line 2, column 19:
PLS-00201: identifier 'CURSOR' must be declared
ORA-06550: line 2, column 15:
PL/SQL: Item ignored
ORA-06550: line 5, column 45:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 5, column 3:
PL/SQL: Statement ignored
[code]...
I have made a simple stored proc which include Transaction through which I have to delete records from two tables EmpDetail and EmpDept . EmployeeId is PK in EmpDetail and FK in EmpDept. Procedure has been executed but on doing exec DelEmployee @EmployeeID='e07' showing 0 rows affected..
[Code]....
I've been self teaching SQL and asp.net and i'm a little stuck. I have a stored proc for the insert and then in my Insert inside my class it's not returning the ID after the insert as I am receiving an error message that NULL value has cannot be inserted. I want to add default values to a seperate table after the insert. I will provide my code below, if anyone can help me why the value is not going across?
[Code]....
i am trying to write a stored proc that takes data from one table based on a field in that tabke and writes that data out to another table with the eventual idea that this data is deleted from the original table it was read from. my stored proc is as follows:
[Code]....
but i keep getting an error: incorrect syntax near 'BACKUP_TWS_Waste_Colection_Request'.
I hope to one day figure this looping records from a table to update it, but i cannot get this to complie, I guess cause I am not
versed in looping in sql yet :(
[Code]....
I just want to get data from a table per record run the stored procedure(i have nesting on) and update the record's fields with the values that were returned from the Store procedure. The Stored procedure is working fine.
I'm converting Active X code in DTS to Script Task for SSIS and I'm having trouble creating an XML file from my stored proc. Here's the code:
[Code]....
It throws an error on the dataAdapter fill saying:
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '<'.
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '<'.
Msg 132, Level 15, State 1, Line 5
The label 'sql' has already been declared. Label names must be unique within a query batch or stored procedure.
I want to have a stored procedure which will accept a Datatable from .NET application and the tablename and will loop thru' each record in the Datatable and insert it into the table. It will insert the bad records into a bad file. Also how to send the datatable to the proc,what kind of parameter to use.
Pls post the code for this proc.
I am having a strange problem with using stored proc in CTP5.I am calling a stored proc in my function like this:
private List<Test> GetDatat(Test pTest)
{
using(var staticDB=new StaticDB()) [code]...
But I am getting error that parameters not found. Looking at the sql trace I can see that CTP5 is sending "default" value if any of my parameters is null instead of the null value.
Is it possible to call 1 Stored procedure from another withing a sql query
sp1 :
select ID1,ID2,ID3,ID4 from table1 ;
sp2 :
select name from table2 where ID = ID1;
I want to get corresponding names of ID1,ID2 and ID3,ID4 in sp1 as a query result.Is it somehow possible to call sp2 from sp1?
I have a GridView sourced by a SQL Server stored procedure with several databound fields, including a money column for item values. My stored proc returns the data through a SELECT and everything looks good. The stored proc also has a single output parameter that sums the total value of the displayed data, and this value is displayed in a label above the GridView.
View 7 RepliesI have a stored procedure that I need to execute from asp.net button , It takes more than 30 mins to execute. So here I need to show a message like "In Process" while execution and disable couple of links..Once the execution is done I need to show "Last processed data and time" and enable the disabled links. So in "In Process" stage we have to allow user to access other pages in the site. How it is possible?
View 2 Repliesi am getting this error while fetching select statement in oracle pl/sql proc... ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'SP_CLASS' ORA-06550: line 1, column 7: PL/SQL: Statement ignored My proc is like..PROCEDURE "SP_CLASS" ( iDec IN NUMBER := null, p_ICID in number := null, p_DATA OUT SYS_REFCURSOR) IS BEGIN if(iDec = 1) then open p_DATA for SELECT ICID AS ID, SNAME AS NAME FROM SETUP_CLASS; else if(iDec = 2) then open p_DATA for SELECT ICID AS ID, SNAME AS NAME FROM SETUP_CLASS where ICID = p_ICID ; end if; end if; END;
View 1 Repliesi have one table and structure of table is like.Now i need to fetch the Resturant Name and status of Resturant ( whether it is closed or open by comparing the opening time and closingTime with currentTime).
View 6 RepliesTrying to pass in my DataTable to a stored proc using LINQ. Below is my code.
var sqlCommand = new System.Data.SqlClient.SqlCommand {
CommandType = System.Data.CommandType.StoredProcedure,
CommandText = "UserIdList"
};
var dataTable = new System.Data.DataTable("IdList");
dataTable.Columns.Add("AttributeIds", typeof(Int32));
dataTable.Rows.Add(26);
dataTable.Rows.Add(40);
dataTable.Rows.Add(41);
dataTable.Rows.Add(45);
dataTable.Rows.Add(78);
dataTable.Rows.Add(33);
dataTable.Rows.Add(36);
//The parameter for the SP must be of SqlDbType.Structured
var parameter = new System.Data.SqlClient.SqlParameter {
ParameterName = "@AttributeIds",
SqlDbType = System.Data.SqlDbType.Structured,
TypeName = "ecs.IDList",
Value = dataTable,
};
sqlCommand.Parameters.Add(parameter);
var user = myDC.DC.ExecuteQuery("exec ecs.udpUserAttributeDetails {0}, {1}", sqlCommand, userId).SingleOrDefault();
This is the sproc
ALTER Procedure [dbo].[spGetGroupDetails]
(
@inUserID Varchar(15),
@inGroupID numeric=0,
@inGroupName varchar(100) = null
)
As
[Code]....
I have to write stored proc to get the daily transaction for a specified date. Right now what i do is everytime i log a transaction in table3 I update table 2 with the count. Then i use table 2 to write the stored proc and to get the desired result. I have pasted my stored proc below with the output. My problem is when another subsystem is added in the AppInfo table i need to update my stored proc because i have hardcoded the subsystem name.
[Code]....