I have a GridView sourced by a SQL Server stored procedure with several databound fields, including a money column for item values. My stored proc returns the data through a SELECT and everything looks good. The stored proc also has a single output parameter that sums the total value of the displayed data, and this value is displayed in a label above the GridView.
View 7 Repliesi have two stored procs. when th 1st stored proc runs i want to be able to use this value returned from the stored into another stored proc.
my first stored proc is:
[Code]....
which returns [Transfer_stations_Authority_name] = 'Blackpool'
now i want to use this value into my second stored proc@
[Code]....
[Code]....
I've modified an existing strored procedure. It originally had one ouput parameter in the stored proc and it was set up as follows in the c# code that called it:
cmd.Parameters.Add("@Var1Param", SqlDbType.BigInt);
if (Var1 == 0)
cmd.Parameters["@Var1"].Value = DBNull.Value;
else
cmd.Parameters["@Var"].Value = Var1;
cmd.Parameters["@Var1"].Direction = ParameterDirection.InputOutput;
cmd.ExecuteNonQuery();
// Get Var1
Var1= dataMorph.ToInt64(cmd.Parameters["@Var1"].Value.ToString());
Just to clarify, this parameter was declared as OUTPUT in the stored proc but as inputoutput in the C# code. This worked fine. I have added another parameter to the same stored procedure and I want to retrieve both from the C# code. The C# code now is as follows:.................................
I have a stored proc. that returns the USL & LSL values for each of the 8 different Metrics. say, Defect Density (Upper Specification Limit) USL = 0.30 & Defect Density (Lower Specification Limit_ LSL = 0.05). Simillarly for 8 different Metrics. Why I need these Spec. Limits ?...Because I want o compare my project's Metrics Value displayed in the Grid View with the corresponding USL & LSL value of the same Metrics. IF Metrics Value is outside of USL & LSL Then I want to Mark the Metrics in Red Color.
1. STORED PROC "Get_Spec_Limits" Does Not Return Anything
2. Error : Object Reference Not set to an Instance of an Object, in the following "OnRowDataBound' Event
OnRowDataBound="GridView1_RowDataBound"
Protected Sub GridView1_RowDataBound(ByVal sender As Object, ByVal e As GridViewRowEventArgs) Handles GridView1.RowDataBound
Dim strConnection As String = "Data Source=******;Initial Catalog=Metrics;Integrated Security=True"
Dim objConnection As New SqlConnection(strConnection)
Dim da As New SqlDataAdapter("Get_Spec_Limits", objConnection)
da.SelectCommand.CommandType = CommandType.StoredProcedure
Dim Productivity_USL As New SqlParameter("@Productivity_LSL", SqlDbType.Float)
Dim Productivity_LSL As New SqlParameter("@Productivity_LSL", SqlDbType.Float)
Dim IDD_LSL As New SqlParameter("@IDD_LSL", SqlDbType.Float)
Dim IDD_USL As New SqlParameter("@IDD_USL", SqlDbType.Float)
Dim EDD_LSL As New SqlParameter("@EDD_LSL", SqlDbType.Float)
Dim EDD_USL As New SqlParameter("@EDD_USL", SqlDbType.Float)
Dim DRE_FS_LSL As New SqlParameter("@DRE_FS_LSL", SqlDbType.Float)
Dim DRE_FS_USL As New SqlParameter("@DRE_FS_USL", SqlDbType.Float)
Dim DRE_TS_LSL As New SqlParameter("@DRE_TS_LSL", SqlDbType.Float)
Dim DRE_TS_USL As New SqlParameter("@DRE_TS_USL", SqlDbType.Float)
Dim DRE_Code_USL As New SqlParameter("@DRE_Code_USL", SqlDbType.Float)
Dim DRE_Code_LSL As New SqlParameter("@DRE_Code_LSL", SqlDbType.Float)
Dim COQ_USL As New SqlParameter("@COQ_USL", SqlDbType.Float)
Dim COQ_LSL As New SqlParameter("@COQ_LSL", SqlDbType.Float)
Dim COPQ_USL As New SqlParameter("@COPQ_USL", SqlDbType.Float)
Dim COPQ_LSL As New SqlParameter("@COPQ_LSL", SqlDbType.Float)......................
I have a stored procedure that works fine for classic asp, but how can I get my output parameters data back from in /MVC 2 / linq/ entities framework model . I have inported the function also, but when i try to code it i dont get results ...i know this is a matter of lack of / knowledge or exmple because i have been scouring the web for it and cannnot find into that accually works.
here is the stored proc.
[Code]....
Here was the one of the few tries I did:
[Code]....
but it executes fine does not give me an error, but also does not return the info i need to the viewmodel
I keep seeing stuff about "ref" on the net but "ref" shows " arbument # should not be passed with the ref keyword.
So i am not sure if there is a problem with the model, or with my understanding this, Now for your info I can do the same step with returning a dataset from a stored procedure fine, but I dont want a data set I just want excatly the data in the output parameters from the stored procedure.
how do I add an output parameter to a Stored Procedure that returns a code or string to the calling app
View 1 RepliesHere is my stored proc
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
Create PROCEDURE [dbo].[sp_GetNextSeq] (
@p_NextSeqNo int = NULL OUTPUT
)
AS
BEGIN
SET NOCOUNT ON;
BEGIN TRY
BEGIN TRANSACTION
Generate Next Sequence Number
[code]...
i want to return two output parameter n temp table from sql server stored procedure
View 6 RepliesI would like to execute a stored proc that simply updates a record. At this point I would like to keep it parameter less. But in future, I will be adding parameters to the stored proc. Can I simply do it via SQLDataSource? It will save me writing few lines of code to execute stored proc in a traditional ado.net.
View 1 Replieslets say i have check box list like that
Cairo
Alex
Aswan
All
each of them is a check box inside this check box list and i have a stored proc that takes paramter which is the name of the city and gives me a data according to the name of the city (Filter). i wana know if i checkec more that one city how can i pass this to the stored proc eg if i checked on cairo and alex what can i do to make the filter looks like this where city Like 'Cairo' and City Like 'Alex' My Stored Proc takes @City Parameter like this Create Proc xx(@City varchar(2)) how can i pass the 2 cities 2 the stored proc
i hve crystal report which is wrking perfectly fine.. now i want to add paramter to my stored proc... but i am not able to add the same parameter on crystal report..i tried to add parameter in the parameter fields the crystal reports field explorer.. but when i verfiy database it still gives msg stored proc expects parameter which was not supplied..SQL State 42000 native error..
View 2 RepliesI am having some trouble with the below code snippet. It is a stored procedure which executes on load that has an output parameter which should display in a label. Familiar which Vb however not so much in C#.
View 2 RepliesI have stored procedure that increments a number. I am supposed to use the newly generated number and insert it into a table. My question is how do I execute the stored procedure, with a hardcoded value of 3 that it expects as a paramter, receive the number it generates as the output parameter and use it in the insert statement.
Here is the stored procedure code:
CREATE PROCEDURE [dbo].[Generate]
@myid int,
@next_no int output
AS
update mytable
set mynumber=mynumber + 1, @next_no = number
where myid=@myid
RETURN
Here is my insert statement, that I tried and it failed:
EXEC @GetNo = Generate '3'
Insert into customers (custid, name, phone ) values
( @GetNo, 'MSFT', '800-345-5678')
i have the following stored proc that inserts data into a database based on a stauts field. the first stored proc inserts into the first table and i am trying to get the identity field out as i need this value for the next stored proc. the first stored proc works fine and inserts the data but the secnd one doesnt, even though there is data there.
[Code]....
I have written a stored proc for raise error.Whenever a customer checks for a record in the DB that doesn't exist in the DB he has to get an error displayed.I have written a stored proc help me on it i know it is wrong suggest me the correct one.
[Code]....
i am trying to write a stored proc that takes data from one table based on a field in that tabke and writes that data out to another table with the eventual idea that this data is deleted from the original table it was read from. my stored proc is as follows:
[Code]....
but i keep getting an error: incorrect syntax near 'BACKUP_TWS_Waste_Colection_Request'.
I hope to one day figure this looping records from a table to update it, but i cannot get this to complie, I guess cause I am not
versed in looping in sql yet :(
[Code]....
I just want to get data from a table per record run the stored procedure(i have nesting on) and update the record's fields with the values that were returned from the Store procedure. The Stored procedure is working fine.
I'm converting Active X code in DTS to Script Task for SSIS and I'm having trouble creating an XML file from my stored proc. Here's the code:
[Code]....
It throws an error on the dataAdapter fill saying:
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '<'.
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '<'.
Msg 132, Level 15, State 1, Line 5
The label 'sql' has already been declared. Label names must be unique within a query batch or stored procedure.
Is it possible to call 1 Stored procedure from another withing a sql query
sp1 :
select ID1,ID2,ID3,ID4 from table1 ;
sp2 :
select name from table2 where ID = ID1;
I want to get corresponding names of ID1,ID2 and ID3,ID4 in sp1 as a query result.Is it somehow possible to call sp2 from sp1?
I have to write stored proc to get the daily transaction for a specified date. Right now what i do is everytime i log a transaction in table3 I update table 2 with the count. Then i use table 2 to write the stored proc and to get the desired result. I have pasted my stored proc below with the output. My problem is when another subsystem is added in the AppInfo table i need to update my stored proc because i have hardcoded the subsystem name.
[Code]....
How to export binary data from table to filesystem via stored proc
View 2 RepliesI need to get IIS Logfile data from Stored Proc. How to do this. I am using Bulk Insert Method in my stored Proc When I execute the stored proc I am getting an error that
[Code].....
I wanted to know how to prevent more than one user from uploading the report at a time .
This is a Windos based app written in c# . When User A clicks Upload option on one server from the menu to upload the files and at the same time when User B clicks Upload option on different server , User B should be alerted a message saying "User A's uploading is in progress,pls wait" . How to achieve this, with the code..I am thinking this logic should be kept in a stored proc, How do I write that proc?
Error occured: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
View 3 RepliesI am trying to return a sum total figure from a stored procedure by using the output parameter. When I execute the stored procedure in SQL it returns 0 or a valid number like it should but when I try to use the webmethod listed below I keep getting a 0 even when I should get a valid number back.
ALTER PROCEDURE spGetCustSum
@CustomerCode CHAR(4),
@Sum AS INTEGER OUTPUT
AS
BEGIN......
Am I missing a step or have some wrong code in this method?