C# - Web Service Receive HTTP POST Request (500) Internal Server Error?
Nov 15, 2010
I am currently writing a C# web service which has several methods, one of which has to receive HTTP POST requests. The first thing i have done is alter the web.config file in the web service project as below.
[code]....
But when i run this i get "The remote server returned an error: (500) Internal Server Error". If i remove the parameter, by removing the stringbuilder and byte code, as well as having no parameter in the web service, it works. So it is obviously a problem with the parameters. I actually want to send more data, and was using a string[] parameter in the web service, but this also failed.
View 1 Replies
Similar Messages:
Apr 12, 2010
I have just installed IIS manager version 6.1 build 7600 and visual studio 2010 (latest additions of both).
I have followed all the instructions and given the correct permisions ect for IIS to work with my directory. I have a helloworld website that has worked via the localhost server many times, but almost hourly something happens to the settings in IIS and it starts throwing errors.
The current error copied below. Basically I am wondering a few things...
1. Why does my IIS constantly do something so that it works one minute and then it wont the next (this is with an identical helloworld.htm file so I know it is not something I am doing with the file that is messing it up).
HTTP Error 500.0 - Internal Server Error
Calling LoadLibraryEx on ISAPI filter "C:WindowsMicrosoft.NETFrameworkv4.0.30128aspnet_filter.dll" failed
Module
IIS Web Core [code]......
View 6 Replies
Nov 19, 2010
I am facing a problem ' HTTP/1.1 500 Intenal Server Error' while I want to create a new project of Visual Studio .NET.
It's running on VS 2003 which is quite old now rather than VS 2010 already came out.
I've tried to re-installed the aspnet account by running 'aspnet_regiis -i' and then reset the iis, and the result is nothing
I also tried to reinstall the IIS and VS 2003. And currently I'm still facing the same problem.
View 1 Replies
Apr 20, 2010
I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.
I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:
HTTP Error 500.0 - Internal Server Error
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information
Module AspNetInitClrHostFailureModule
Notification BeginRequest
Handler PageHandlerFactory-Integrated-4.0 [code]....
Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.
The code in the test.aspx is
<%@ Page language="vb" %>
<html>
<body> [code]....
View 9 Replies
Mar 22, 2011
I try to upload web application to the server. After that I access it through http://..., but get
[Code]....
I search on the web, and add IIS_IUSRS to security of the folder of web application, and upload again. But still get same error. I need help on this,
View 2 Replies
Sep 20, 2015
the same application is working fine in 32 bit machine of my colleague where as in my 64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module
IIS Web Core
Notification
BeginRequest
[Code]....
Config Source:
18: <validation validateIntegratedModeConfiguration="false"/>
19: <handlers>
20: <remove name="ChartImageHandler"/>
More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
View more information »
View 1 Replies
Jan 11, 2010
I'm very new to ASP and have been writing a site which has been working fine both in development and on my production server.
However I added some reports to my site and now it works fine when I run debug on my local machine, but when I package the solution and move it onto my production server I get:
HTTP Error 500.23 - Internal Server Error
An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode.
I'm suing server 2008 STD X64 with IIS7. I've made sure all my windows updates are done.
I've no idea whats causing this. I've tried removing the pages with reports on and I still get the same issue.
View 3 Replies
Aug 18, 2010
I know how to retrieve a GET object with Request.Querystring("objname"), but how do I receive POST variables using the Request object, or somehow through the code?
View 2 Replies
Apr 20, 2010
I am connecting to remote server for web service using ASP.NET 3.5 web site. something like, [URL]. Remote server is providing digest authentication to access the web service. I dont have access to modify authentication on the remote server but I have an windows account on that server. If I try to Access service WSDL through programming I get the following error:
The request failed with HTTP status 401: Unauthorized. Same web service if I try to access through browser, [URL], it asks for user name and password. Entered windows account user name and password, still getting error: You are not authorized to view this page, HTTP Error 401.1 - Unauthorized. How to pass the digest authentication credentials to the web service through visual studio or any other programmatic method?
View 1 Replies
Oct 4, 2010
using vb.net/asp.net 2005
when a user enters a bad email I am doing a check on this and throwing an exception message as follows, this works fine on the test site but for some reason the same code on the live site gives a "internal server error" (http code 500). The code below:
[Code]....
not certain why this is happening, I assume that it's some server or config difference between the test and live sites. has anyone seen this before? For a quick fix i'm registering javascript alert and showing the same text so it works but I would like to figure out why the code above is not working.
View 1 Replies
Oct 22, 2010
Hoping someone can point me to a solution, haven't been able to find one yet.
I'm using the standard way for send HttpWebRequest
[Code]....
As you can see from Fiddler/SOAPUI it does return the SOAP fault, however using HttpWebRequest i can't capture the response.
Returning 500 triggers my exception handling and Capturing the WebException doesn't expose the response.
Does anyone know how to capture this response xml in the case of 500 Internal Server Errors.
View 1 Replies
Jun 30, 2010
I have an existing ASP.NET application and there is a requirement in which i need to use ASP.NET MVC in that.
So altogether i need to mixing ASP.NET Webforms and ASP.NET MVC I am following an article [URL] I am done with all the steps. But its not working as expected.
[Code]....
When ever i add this to the web.config i am getting error. HTTP Error 500.22 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. ERROR CODE: 0x80070032 My OS is Vista Enterprise Edition.
View 1 Replies
Aug 23, 2010
I am trying to create a web service that can do the following functionality:
Request XML
[Code]....
How can I create web service to do this.
View 1 Replies
May 15, 2010
I have a webservice which works 100% fine on my developer machine. Where Web Service is installed on LOCALHOST on my developer machine,Then i went to my servers, I installed webservice on one server and map it with the server where the website is hosted, Then i tried accessing this service using BROWSER from my web server, it worked fine, That means the mapping was done perfect.Then i run my program on web server (website). It worked fine on page1, then on page2, but when i did the same and call same function on page3, It popped me any error of
View 4 Replies
Apr 11, 2010
when i am adding service reference the Following erro shows Up..where as the same works on the Other machine. The url when tested in Internet explorer works but only while adding shows the error. The request failed with HTTP status 403: Forbidden. The HTTP request was forbidden with client authentication scheme 'Anonymous'.
View 5 Replies
Nov 9, 2010
I am using an Zencoder API to transcode video files. Once the job is completed they will do a HTTP POST with XML or JSON data containing the Job ID and other info to the url we provide.
So if URL is www.abc.com/GetZencoderResponse.aspx or .ashx, how can I read the data they post?
excuse me for the underlines, i thought that would make my query stand out.
View 6 Replies
Jan 29, 2010
All I need is to send a http post request I pulled from fiddler.
I do not want to use HttpWebRequest class. It makes it hard to set up a request, does not allow to change host,
and when it does send it it looks nothing like the request I want. The server is very sensitive and unless I copy the request headers 100% it will return an empty page. Why can't I just type in the headers and send it that way? What would be 5 minutes of
work in php is taking the whole evening in asp.net.
This is what I am trying to send, simple as it gets: ...
View 9 Replies
Nov 25, 2010
I need to post a request to aspx page within dos command line.. How can I do that ?
View 3 Replies
Sep 16, 2010
have a web service that I'm trying to consume from a console app through http post. I receive a 500 exception error from the xmlstring parm being passed to the web service. Add the following to web.config of the web service. Although it is not working in debug in vs 2008 as well.
[Code]....
[Code]....
[Code]....
the host file is setup for the web service as well.
[Code]....
View 6 Replies
Mar 23, 2011
I'm trying to upload a file to an ASP 2.0 web service through HTTP 1.1 POST from a client-side application. If my web service function is declared as
<WebMethod()>
Public Function UploadFile(ByVal file as Byte(), ByVal fileName as String) as String
...
The test form says the request should take this form:
POST address_of_service HTTP/1.1
Host: <host>
Content-Type: application/x-www-form-urlencoded
Content-Length: length
file=string&file=string&fileName=string
How do I get my binary file data into that form? I've tried just converting the file data to a string and putting it in the body (file=<string_data_here>) but I get HTTP 500 errors back, complaining about not being able to convert it to System.Byte. I've got HTTP POST working fine elsewhere in my application with plain string parameters. Also, out of curiosity, why is it showing the file parameter twice?
View 1 Replies
Jul 22, 2010
My web service uses .Net Framework 2.0. An e-learning application reads and updates an Access database in the web service via Http Post commands. I test the e-learning application and the web service using the version of IIS 7 that came with Windows Vista. I run IIS using localhost in my browser.
All works well. But a friend is having trouble running the same test with my files on her IIS 6 server. So I'm developing a checklist of issues in setting up an IIS 6 server to run a web service. I plan to include all possible causes of problems including permissions, accounts that are needed, etc. Are there resources to which I can go for this checklist?
View 1 Replies
Oct 4, 2010
There is a Compilation Error at the web site located at http://cforedu.comDescription: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
View 13 Replies
Sep 22, 2010
we need to expose a web service to the 3rd party vendor which can only call using POST protocol, NOT SOAP.So my question, is it better to build a web service or just simply .aspx page?Also is there any best practice documentation on this.
View 4 Replies
Mar 16, 2011
I am trying to call webservice from my web application. The web application had integrated windows authentication. I've written custome principal class to do authorization. But when I give call to my web service with default credentials it gives me 'the request failed with http status 401 unauthorized.' error.
When I give call to my local webservice it is running fine (It also has integrated windows authentication) But when I add reference of same web service from QA server I am getting this error. Not sure what is happening. I also tried
WS.PreAuthenticate = false;
WS.Credentials = System.Net.CredentialCache.DefaultCredentials;
View 2 Replies
Dec 11, 2010
I have several ASP.NET sites, hosted on the same domain (different subdomains) and working via HTTPS.I have WCF service, hosted on the same domain.I have a separate state server for sessions. why - i will reply later, but it's a 'must') On my sites, I use grid components from Telerik (but actually it does not matter) that ask for data from WCF service and must be filled with this data.I cannot manage to make POST request to WCF service from javascript: for some reason it's always either GET or OPTIONS (no matter if I use Sys.Net.WebServiceProxy invoke or just a plain jquery AJAX request). It happens even if I indicate COOKIE mode
View 3 Replies
