I want to make panels Visibility true or false based on a result of a Func.I have a page with controls as in the following code:
<asp:Panel ID="Panel2" runat="server">
<asp:Panel ID="Panel3" runat="server">
<c:PermissionPanel ID="P1" runat="server" ValidationGroup="Val1">
[code]...
I've got a custom control with asp:hyperlinks that's causing validation which I don't want... Is there anyway I can stop this from happening?
View 1 RepliesWhen to go for custom validation control and when to do validation in javascript? What are pros and cons of each of them?
View 3 RepliesI want to create a custom control where I define several specifically named DIV sections. The code-behind logic of the custom control will perform operations on these named DIV sections. The page where the custom control is hosted needs to be able to add named controls to the DIV sections and perform operations on these named controls added to the DIV sections.
Let me explain a little further. In the custom control, I want to have code behind logic that fires the following Page Event and uses a condition to make one or another specifically named DIV section visible or not:
< _
ToolboxData("<{0}:BaseDetails runat=""server""></{0}:BaseDetails>") _
> _
Public Class BaseDetails
[code]...
how can I create a custom control which is able to generate the named DIV sections "DetailsNameDiv1" and "DetailsNameDiv2" where my custom control can check a condition and make one or the other visible. Also, I need to be able to add controls to these named DIV sections when I host the custom control and the control that I add to the named DIV section needs to let me set values of these controls from the code behind logic of the page (or usercontrol) where the custom control is being hosted (in my example, I am adding TextBox controls that I want to set the Text property from a SQL Data Reader).
I have currently on multiple pages a modal popup that displays the information below, we are getting to the point where we need to call this popup from multiple locations, currently i have duplicate setups on each page that i want to use it on, but its becoming a mess to manage when a change is needed.. so im looking to see if what i have within the modal popup can be turned into a control that i can call anywhere thru out the site and have just 1 setup to maintain going forward..If its possible to create a control that can then be placed within the modal popup and server the same purpose that would be great any links here is what i have within the modal popup that i have on atleast 3 pages currently..
[Code]....
I have a user control that has multiple instances on a single page.
Is it possible to have each instance use a unique ValidationGroup? I could expose a property, but I'm wondering if there's any way to do it automatically.
I am trying to create a web custom control but I am unable to find the templete that should be in my projects window. I am using Visual Studio Pro and it should be there. Doc's say standard version doesn't have it but thats all I can find.
View 4 RepliesI am creating a custom 'control' which is simply made of two html inputs [type=text] but can't figure out how the validation will work on the view end.
I want to treat these 2 inner controls as asingle control so when a error is added to modelstate both of these inputs are highlighted in the view and a single validation message is shown.
I've written a custom ASP.net control that descends from LinkButton and overrides the Render() method. I'm using it to replace ImageButtons in the site I'm working on so we don't have to have an image for each button. This control works fine, does the required post-backs etc., however it doesn't fire the validators in its validation group. This is obviously an issue. The code for the control is (condensed) as follows:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
public class CustomButton : LinkButton
{
public string SpanCssClass { get; set; }
protected override void Render(HtmlTextWriter writer)
{
if (!Visible)
{
return;
}
writer.AddAttribute(HtmlTextWriterAttribute.Name, UniqueID);
writer.AddAttribute(HtmlTextWriterAttribute.Id, ClientID);
writer.AddAttribute(HtmlTextWriterAttribute.Class, CssClass);
string postback = string.IsNullOrEmpty(OnClientClick) ? "javascript:__doPostBack('" + UniqueID + "','');" : OnClientClick;
writer.AddAttribute(HtmlTextWriterAttribute.Href, postback);
writer.RenderBeginTag(HtmlTextWriterTag.A);
writer.AddAttribute(HtmlTextWriterAttribute.Class, SpanCssClass);
writer.RenderBeginTag(HtmlTextWriterTag.Span);
writer.Write(Text);
writer.RenderEndTag();
writer.RenderEndTag();
}
}
Does anyone know why this would not be causing the validators to fire? I was under the impression that leaving all the other methods in LinkButton un-overridden would leave all the other functionality the same.
I have this code:
protected void registerBtn_click(object s, EventArgs e)
{
bool agencyPictureActive = agencypicture.HasFile;
agencypictureValidator.Enabled = agencyPictureActive;
Page.Validate();
if (Page.IsValid)
{
and this control:
<asp:label runat="server">Logo</asp:label>
<asp:FileUpload id="agencypicture" runat="server"/>
<asp:CustomValidator id="agencypictureValidator"
ValidationGroup="userForm"
ControlToValidate="agencypicture"
ErrorMessage="some error msg" Text="*"
OnServerValidate="checkImageSizeValidate"
runat="server">
</asp:CustomValidator>
I want to validate and save the image along with other form value upon "registerBtn_click" , but the custom validation control of the image does not activate somehow... why?
This is my submit control:
<asp:LinkButton id="btnSubmit" OnClick="registerBtn_click"
ValidationGroup="userForm" Text="Submit" runat="server">
</asp:LinkButton>
I have 2 custom validator controls on my page but for some strange reason the Custom Validator for FileUpload control works and the custom validator for TextBox control does not work. Here is the aspx code:
<asp:FileUpload ID="_fileCv" runat="server" Width="500px" /><br />
<asp:RequiredFieldValidator ID="_rfvFileCv" runat="server" ErrorMessage="Resume; " ControlToValidate="_fileCv" SetFocusOnError="True" ValidationGroup="APPLY">
<img src="images/mandatory.gif" alt="Required" /></asp:RequiredFieldValidator
<asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="_fileCv"
ErrorMessage="Max file size for documents is 4MB." OnServerValidate="CustomValidator1_ServerValidate" ValidationGroup="APPLY"></asp:CustomValidator>
<asp:TextBox ID="_txtHealthComments" runat="server" TextMode="MultiLine" Rows="5" Width="500" />
<asp:CustomValidator ID="CustomValidator2" runat="server" ControlToValidate="_txtHealthComments"
ErrorMessage="Kindly enter health Comments ." OnServerValidate="CustomValidator2_ValidateHealth" ValidationGroup="APPLY"></asp:CustomValidator>
Here is the code behind:
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) {
if (_fileCv.FileBytes.Length > 4194304) {
args.IsValid = false;
} else { args.IsValid = true; } }
protected void CustomValidator2_ValidateHealth(object source, ServerValidateEventArgs args) {
if (_rdoHealth.SelectedValue == "1" && _txtHealthComments.Text == "") {
args.IsValid = false; } else { args.IsValid = true; } }
I'm trying to add a validation support to DropDownList by creating a custom control inheriting from DropDownList:
public class MyDropDown: DropDownList, INamingContainer
{
private const string ValidatorID = "Validator";
private RequiredFieldValidator _validator;
[Code]....
My class implements INamingContainer because I wanted to avoid naming conflicts. Unfortunately when I try using this control I get the following exception:
Unable to find control id 'MDD' referenced by the 'ControlToValidate' property of 'MDD_Validator'
This is happening beause for INamingContainer FindControl(NamingContainerId) returns null.
When I remove INamingContainer implementation and set validator ID in the following way:
_validator.ID = String.Format("{0}_{1}", ID, ValidatorID);
Everything is working fine, and id given to Validator is the same as it would be inside Naming container.
But is there a way to accomplish this WITH INamingContainer ?
I have a textbox in my application which has multiple validation on it e.g. RequiredFieldValidator, RegexValidation and CustomValidation. My page has several similar textboxes. So I just copy-paste and change id and controltovalidate properties and it is working.
Since similar tbxs are going to be used on another page as well, I think it would be nice to create my own custom TextBox control with built-in validation.
Here are two approaches I have found and tried:
1: Implement from IValidator perform my custom validation in Validate Method. As shown here: Self-Validating TextBox But it does not show how to implement client-side validation.
2: Create custom control that derives from TextBox and add asp.net built-in validators I need. As shown here:Custom TextBox. I tried the code and it works server/client side.
I like the first approach but don't know how to implement client-side validation. I know I need a client-side js function. I can do that. I know how to include my js file using Page.ClientScript class but don't know how to integrate all together and make it work.
I can create a UserControl or the second approach above but for now I am specifically looking to learn and implement client-side validation from custom control.
I am sure this question has been asked and answered; but I haven't managed to find it...
I am creating a very simple custom System.Web.UI.Control that has a few properties. I can define in my ASPX page the following tag and everything is happy:
<ns:MyControl runat="server" MyProperty="Value" />
However, if I want to have one or more "child" properties, like so:
<ns:MyControl runat="server" MyProperty="Value">
<Element AnotherProperty="AnotherValue1" />
<Element AnotherProperty="AnotherValue2" />
</ns:MyControl>
what I need to do to make the XHTML validate. I always have
Content is not allowed between the opening and closing tag of element 'XXX'
Element 'XXX' is not supported
The name contains uppercase characters, which is not allowed
The code actually runs as expected, but I haven't manged to find a good example on how to do this correctly so that everything validates. In terms of implementation of the Custom Control, I just have all properties stubbed out at the moment, and looks something like:
[ParseChildren(true)]
[PersistChildren(false)]
public class MyControl : Control[code]....
Ultimately, Element is intended to build up a collection of Elements. Any insight on how to do this properly and have the XHTML validate
I have a little doubt about creating a login control in the master page within a contentplaceholder.
What i want is to create my own login control in the masterpage, using a loginview inside a contentplaceholder. The code is the following:
[Code]....
So far so good, but now i want to create the logic to do the actual login. In a regular aspx page i'll do it in the cmdlogin click event, but as i'm in the masterpage, i'm not sure if i can do that. I actually tried to do it in the code behind of the masterpage, but it didn't work. What can do?? do i ahve to use the asp.net login control?
I have a custom user control with some input fields and a submit button. I need to validate the fields using the jquery validation plugin when the submit button is clicked. (The function of the submit button is to create another custom control which displays the data entered in the above mentioned control)
Bt as far as I knw, validation plugin works only with form validation ryt? And my custom control does not contain a form tag as I am using master pages. The custom control is present in one of the content pages and the master page already contains a form tag with a runat=server attribute. And I guess one page can contain only a single form tag with runat=server attrib ryt?
So how do I get it to work?
I recently created a custom validation control that compares two textboxes and verifies their content. When I use this control in a detailsview I have no problems but, when an updatepanel is added the validation control no longer works.I'm using Visual Studio 2010 and .net 3.5 framework.
View 5 RepliesI want to create custom control in Asp.Net 3.5
View 5 RepliesI want to implement the own custom TextBox control in Asp.Net(C#).
View 2 RepliesI have a custom control that creates a textbox on CreateChildControls.I'm trying to set the value of this textbox (trough a property of the control) on the load event of the page that uses the custom control. Unfortunately at this point CreateChildControls haven't been executed yet and the textbox is null.
I called EnsureChildControls on the consumer page before using the custom control properties but no luck, still null.This happens when is not postback.
Im inheriting from GridView control creating MyGridView class which has cs extension, not ascx. U put it in App_Code folder and in web config added:
<add tagPrefix="mgv" namespace="MyProject"/>
it works fine but when I wanted to convert it to web site project I have problem that it cannot find this reference.
i have used this coding to create a custom Control as my knowledge in the pervious post.i dono it is correct or not.I need a further help regarding this.so far i have used this coding the appcode->Number.cs in that i have used this coding further what should i do: my requriements is that i drag the textbox in the controls only number should be entered in that.for reference see my previous post:http://www.eggheadcafe.com/community/aspnet/2/10200401/how-to-create-a-dll-file-for-the-textbox-with-some-requriments.aspx.i need it in web applications
using System;
using System.Data;
using System.Configuration;
using System.Linq;
[code]...
I am trying to create a custom password validation attribute which has these requirements
1. cannot be empty.
2. doesn't contain space or other special chracters, which I'll define later.
3. length is between 6 - 12
[Code]....
it works fine on the server-side but I'd like to make this work on the client side as well, so I created a PasswordAttributeAdapter class
[Code]....
and in global.asax I added
[Code]....
I'm creating a custom gridview control. so far I've been able to add custom sort arrows and an export to excel feature.
Now I want to have a textbox and a button in the header row to filter each row.
I want to extend either the boundfield or boundcolumn class to add a property that will allow me to distinguish wheter the column should have a filter textbox in the header.
I'm goingto create an asp.net control which should be cross browser. and support some skin - multilanguage and rtl & ltr support.
View 3 Replies