I am developing an ASP.Net MVC application that throws a "Required permissions cannot be acquired" exception.The weird thing is that if I change the location of the folder containing my app to another location, the app runs just fine. (i.e Copy the folder from .../Programs/MyApp to ...Desktop/MyApp)I have checked the folder permissions and they are fine
View 1 RepliesI am developing a website in MVC 2.0. I want to change the View folder location in my website. I wanted to keep the views folder inside other folders, When I try to do so i am getting following errors
The view 'Index' or its master was not found. The following locations were searched:
~/Views/Search/Index.aspx
~/Views/Search/Index.ascx
~/Views/Shared/Index.aspx
~/Views/Shared/Index.ascx
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
My Views folder will be in ~/XYZ/ABC/Views instead of ~/Views. Will I get any problems If I change the default Views folder location. Do I need to change anything in HTML Helper classes because I don't know anything in MVC as this is my starting project i dont want to risk.
I have a web application in a child folder of iis like so
mysite.com/childapp
mysite.com/childapp/bin
childapp is set up in IIS application.
what I want to do is remove the application from the childapp folder and just have it as a virtual directory and move the bin folder as follows
mysite.com/bin
but when I did this it says pages are not precompiled etc etc. but they are and I assumed that the bin would be loaded into the application space and the pages would still work.
Environment: Windows 2008 R2 x64 [IIS7.5]
irectoryInfo("D:MySecretFolder")
I get thrown the following error.
'System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
Application pool is using NetworkService account as its identity and I have given that account full rights on that folder.
When my ASP.NET site uses documents (e.g. XML), I normally load the document as follows:
Server.MapPath("~DocumentsMyDocument.xml")
However, I would like to move the Documents folder out of the website folder so that it is now a sibling of the website folder. This will make maintaining the documents considerably easier.
However, rewriting the document load code as follows:
Server.MapPath("../../Documents/MyDocument.xml")
results in a complaint from ASP.NET that it cannot 'exit above the top directory'.
how I can relatively specify the location of a folder outside the website folder? I really don't want to specify absolute paths for the obvious deployment reasons.
My File is not getting saved in the folder location
"C:Documents and SettingsSweet PcDesktopWebSite12uploadResume"
My code
uploadResume.SaveAs(Server.MapPath("uploadResume" + uploadResume.FileName));
I am going to deploy my MVC 2 website, do I need to copy the whole solution directory to the 'virtual folder' equivalent location?
View 27 RepliesI want to secure folder of my website for example if some one do [URL] then it is giving access to mayur.doc which is in templocation folder of my website
View 1 RepliesI've been searching google for recommendations on conventions or best practices when it comes to the 'case' and naming of files on folders within a Web Application.Most of the time I work within Visual Studio, developing ASP.NET web applications. In the past I've always used PascalCase for all of my files and folders, with the exception of Javascript files which tended to be camelCase.More recently
View 2 RepliesI implemented the Location tag in the web.config file to authorize the anonymous users for Images folder. I deployed the code in IIS6.0 with Forms authentication mode enabled for the virtual directory. I disabled all other authentication modes. When I browse the login page, Images are not displaying. When I set Anonymous authentication in IIS6.0 for the Image folder, it works fine.
See below the code implemented in web.config:
[Code]....
Can i retrict the windows dialog to select only files from the selected folder and avoid to navigate from another folders?i am selecting from server side.
View 5 Repliesi'm creating a asp.net web application in which i need to select source file using browse button to select the Source location from where the files has to be copied from and destination file using browse button to select the destination location where the files has to be copied to .So pls tell me what should be the code for browse button to browse a folder for source and destination and copy the source folder files to destination folder(i want to copy only text and excel files from source to destination folder) and i want user to see the progress how files are copying from source to destination and error also if there is any error in copying.
View 1 RepliesI have a few websites that should access a central location (folder) on a different domain that stores pics. In previous version of this system I stored each pics folder under the same domain and I could access the files with FileInfo
Dim fi As FileInfo = New FileInfo(MapPath(img.ImageUrl))
How can I ger the file info for a file in a different domain ?
I need to select folder location alone using the File Uoload Control.For eg, D:/FolderName/ (or) D:/FolderName
View 4 RepliesSo I would like my solution to save in the same folder as the rest of my files. I am a win forms developer so web is new to me.
1) Is there any reason why I shouldn't do that for web.
2) Second how do I do that. I know that I can change the solution's saving location by changing ToolsOptionProjects & SolutionsProject's Location. However, I just want it to use the location of the new website I create and not that specification.
If I have one file- name (picnew.jpg) and want to paste it to six ip's d:
Few folder drive by one action.
asp.net or cmd commands or anything else
Here I trying to open a folder location through my save path in database. I binded a gridview with a hyper link as a template column. In hyperlink's Navigationurl proprty I write this
NavigateUrl = '<%Eval("ProjectPath") %>'
It's working fine with path which doesn't have spaces like D:/Myprojects/Project1. But if this path wud like be D:/Myprojects/Project 1, it doesn't work. how to come over this.
I am currently using the LoginStatus Control to display the Login/Logout button. I want to change the location of the login page. Currently the login page is on login.aspx (default) but I want to have it so that when the login is pressed it re-loads the current page but attaches GET variables such as ?action=login to the URL. Reading through the .net documentation I found this: Quote: LoginStatus control provides a link to the login page defined in the application configuration settings. I'm not sure which configuration setting this refers to. Where exactly can I edit this value?
View 2 RepliesI need to change the location of a web service. During development, I've made a reference to a web service in my local computer in my Visual Studio web site, and with the following command I use it
Dim LoginService As localhost.IPelosaLoginservice = New localhost.IPelosaLoginservice
Because I used localhost it works fine even after deploying to a production web server.
By adding a web reference in Visual Studio, the web.config is update with a key containing the name of the service and the path.
Now I need for one customer to change the path of the web service (because they work with a modified one). How do I do this? I've changed the path in the web.config, but that doesn't seem to make any difference.
I can't believe that you have to change you're code, add another web reference and deploy the program. There must be a better way, since I want the code for the web sites for alle the customers to be the same.
I have a webservice that works locally but when I publish it to our web server the auto-generated WSDL uses the server's name rather than the host name.
I have searched the internet but only found complex answers. There should be a simple web.config change or class attribute setting to change the target location.
Basically the auto-generated WSDL uses this location (host name) "http://servername.domain.com" rather than "http://services.desireddomain.com"
I even tried saving the auto-generated copy and manually changing the target locations. But that didn't work either for some reason; it seems that it should have.
this might seem REALLY simple but i'm not a genius...anyway, i know i saw this somewhere: here's what i want to do: link the web.config file to my membership database...which i am going to put on a separate server on the network.
View 9 RepliesCurrently this is the location of my WebDev.WebServer.exe -> C:Program Files (x86)Common FilesMicrosoft SharedDevServer9.0WebDev.WebServer.exe
I want to change it to -> C:Program Files x86Common FilesMicrosoft SharedDevServer9.0WebDev.WebServer.exe
Notice that the new location has no parentheses (because this might be the cause of an oracle connection problem I'm having (using Oracle.DataAccess))
I'm guessing simply moving it to the new destination will cause some problems, so what will I need to do to the Visual Studio 2008 configuration?
I've got a click tracking AJAX function (calls a WebMethod on an .aspx page), and I need to call it when the user clicks through to a link.Unfortunately, I'm using window.location = "newUrl" to change the page, which seems to make the AJAX call fail. Is there a way around this?I do not need to get any information back from the AJAX call, I just need to make sure the WebMethod is called'm aware that I could just redirect on the success() or failure() calls, but then I would have to wait for the clickTracking() method to run, which takes ~ 1s. That is not acceptable by the agreement in the project spec, and so is not a viable solution.
View 3 RepliesString is immutable and StringBuilder is mutable. So if I change the value of a string a new memory created with the new value, whereas in StringBuilder it updates its memory location rather than creating a new memory location. So for large concatenation stringBuilders are preffered. But when I create a new String object, a fixed memory is created. And any changes will update its memory location, rather than creating a new memory location.
For e.g.
String s = new String();
s = String.Empty;
for ( int i=0;i<100; i++)
{
//s = s + "test" + i.ToString();
s =string.Concat(s, "test" + i.ToString()); ///This is effecient compared to previous step
}
Now instead of String class I will use a StringBuilder class.
StringBuilder s = new StringBuilder(String.Empty);
for ( int i=0;i<100; i++)
{
//s = s + "test" + i.ToString();
s.append( "test" + i.ToString());
}
URL....This link shows a demo that let user to put origin and destination then get direction. I want to know how to add a option which is let user to use their current location as origin location (Location from).
View 1 Replies