Configuration - Have Settings In The Web.config (and Access Them Using ConfigurationSection) Or In A Separate XML File?
Sep 20, 2010
I have few settings which I could place in a separate XML file and have them accessed in the Web app. Then I thought (thinking of one additional file to deploy), why not have them in the web.config itself. However, just because I need to have custom nodes, I can not have the settings under . So, I am thinking of creating a custom config handler following this. Would that be better than having a separate XML file? Is It going to be an overkill or performance wise? Is there a better way to go?
My asp.net app has is using a web.config for common configuration. I also have a section that maps some data objects to connection strings, and that section is going to be couple thousand of lines. I want to move that section to another config file "dataMappings.config", so I don't bulk up web.config - is there a standard mechanism of accessing that config file?
I am designing a web application for Leave Application of our faculties. There is a form in my website which represent the existing paper-back leave application form. Users(faculties) have to fill-up this web form and after validation an email will be send to the email address of our principal/hod. I hope that email address(s) will be provided to our group members. Now I want to know that what will be the required configuration of the web.config file? I found this blog ScottGu's Blog. Here the given configuration is:
[Code]....
But I think this is not acceptable for my project as the smtp from="test@foo.com", userName, password are unknown to me. So what should I do. Am I able to understand my requirement to you?
I've been thinking about this for a couple days but still would like some feedback on the best way to go about this:
I have multiple sites (domains) that will be running the same code. However, there are a couple settings I have in the appsettings web.config file which are relative to each site. (ie: defaultSiteTitle, emailFromAddress, etc).
I would like to deploy this application in only one location (folder) and point the domains in IIS to that one directory.
To do this, I believe I cannot use the web.config file to hold these settings...
So, I decided to make a SiteSettings.xml file and load the site settings in there:
<sites> <oSite domain="abc.com" defaultSiteTitle="This is Site ABC" emailFromAddress="info@abc.com" /> <oSite domain="xyz.com" defaultSiteTitle="This is Site XYZ" emailFromAddress="info@xyz.com" /> </sites>
So when I need to access the site settings I just call a function in my datalayer that reads this xml file and via the httpRequest I pass it it determines which site settings to use.
Okay, that works when I call it from a page where I have the httpRequest...
Howver, now when I'm into some business layer functions say sendEmail and I need to find the emailFromAddress from the SiteSettings.xml file, I don't have the httpRequest. I know I could probably hack something together and pass it someway...
But I'm trying to figure out the best way to do this...
I don't really want to store it into session.
Is it possible to tell IIS what web.config file to look at, if I had multiple web.config files? (I don't think this is possible).
I have an asp.net 4.0 web application.I need extensive configuration data for this web application, that is strongly typed and the structure of this configuration data is going to be fairly complex (cannot do with key-value pairs). In the past I remember having done this in .Net 2.0 but cannot figure out how I will do it in .Net 4.0. The class and config mapping is like shown below (really simplified for the purpose of illustration only):
Web.config is the main settings and configuration file for an ASP.NET web application. The file is an XML document that defines configuration information regarding the web application. The web.config file contains information that control module loading, security configuration, session state configuration, and application language and compilation settings. Web.config files can also contain application specific items such as database connection strings
Example 1:
<!-- This is an example Web.config file -->
[Code]....
In this article, we will see how to read the configuration settings in the web.config using 'JavaScript'.
Step 1: Create a new ASP.NET website. Add a button control to the Default.aspx.
Step 2: Right click the project > Add New Item > Web Configuration File
Add the following sample entry to the appSettings section in the web.config between the <configuration> tag as shown in the example 1:
<add key="var1" value="SomeValue"/>
Step 3: To read these entries using JavaScript, add the following script in the <head> tag of your Default.aspx page as shown below:
<head runat="server"> <title></title> <script type="text/javascript"> function ReadConfigSettings() { var v1 = '<%=ConfigurationManager.AppSettings["var1"].ToString() %>' alert(v1); } </script> </head> Step 4: Call this function on a button click and display the values of the configuration settings
<input type="button" value="Get" onclick="ReadConfigSettings();" /> That's it. Run the application and click the button. The value of the key in the appSettings will be displayed in the alert window. I hope you liked this short article.
I have many Connection strings in my web.config file. I also have a "dataConfiguration" setting in the same file which specifies what database my app connects to.
How do I read the "defaultDatabase" setting / section from the, see below xml file. <configuration>
I'm starting to consider creating a class library that I want to make generic so others can use it. While planning it out, I came to thinking about the various configuration settings that I would need. Since the idea is to make it open/shared, I wanted to make things as easy on the end user as possible. What's the best way to setup configuration settings without making use of web.config/app.config?
What it best location to store various configuration settings of a web site modules. Creating class (that inherit ConfigurationSection) that map the settings in web.config file?Or creating some DAL and BLL clases that work with database?
Is it possible to have separate config files for specific sections of the web.config? Specifically I'd like to move IIS 7's rewrite section out of the web.config and into it's own config file.
I'm just wondering what the best practice is for managing web.config connection strings and SMTP settings when working locally in VS2008 and deploying to a remote server?
Does somebody knows how to access applicationSettings-Keys in web.config (NOT appSettings) from aspx.file like "<%? applicationSettings:Keyname %>? This seems to work only with the old "appSettings".
From code I can it access it with "Properties.Settings.Default.Keyname", thats clear.
This is a general question and is not about any particular issue that I am facing right now.As configuration settings in the child level can override the ones in parent level,errors can occur when you have 2 web.config files one redefining configuration settings that you cannot override such as authentication or session state.Issue happens when you have authentication / session state set on the lower level web.config and also in higher level web.config. Is there any other configuration settings like these ?
However, xmlFilePath shows up as Nothing after that line of code is run. What's the correct code to get a setting out of the web.config file in an ASP.NET application?
NOTE: Although you can add keys individually to the <appsettings> tag, I'm trying to figure out how to use it with the "Settings" tab in the project's properties.
I'm preparing to deploy a ASP.NET web application. The target server has already a previous version of my web application with parameters specified on the web.config file.
In the new version of this web application, the web.config file contains new sections I would like they appear into the target web.config file on the server.
However I can't find the way to merge the new web.config sections into the existing web.config file ?
Does I have to do it programmatically, or is there a tool to merge the both files during installation ? (I'm using Web Setup Project).
I'm migrating a piece of functionality from my App_Code directory to a separate project that's going to build a class library to be referenced by my web app. One of my classes in the App_Code piece inherits form System.Configuration.ConfigurationSection, like so:
Imports System.Configuration Imports System.Web.Configuration Imports Microsoft.VisualBasic Namespace P10.WebStore #Region "WebStore Section" Public Class WebStoreSection Inherits ConfigurationSection
I absolutely cannot get the project to recognize ConfigurationSection as a class. Nothing I google about this class mentions having to do anything special to use it. Is it because this is a class library and not an .exe or somethign?
I am developing web applicaiton. I want to read web.config in App.config file. I have appSettings and connectionStrings in web.config. How to read that?
We are experiencing some strange behaviour on one of our ASP.NET web servers (Windows 2003 64-bit). After some activity, two third-party controls are unable to run correctly. One is log4net (it does not write error messages out) and the other is a menu control (it displays eval message instead of picking up its license). The one common thread is that both controls pick up their config from external config files (linked to from web.config).
Just wondering if anyone has any thoughts on this or experienced this in any way. Is it related to file/folder rights? The server has been running fine for a while and just started exhibiting this behaviour. Perhaps it occurs around the time the worker processes are recycled.
I have built an ASP.NET (.NET v4) application in VS 2010. It is working just fine. But when I try to create deployment package (so I can deploy it in our test IIS 7.5 Server), it gives me error like this,
Error 1 Could not open Source file: Could not find file 'C:11-2 estobjDebugCSAutoParameterize ransformedWeb.config'. 0 0 test
Thing is in past, I had deployed the SAME application using the SAME method.
I have a Windows Service I have developed in Visual Studio 2005 (C#).
It accesses a database using a connection string in machine.config.
On my Windows XP Pro 32bit (SP3) machine, it works correctly.
On my new Windows 7 Pro 64bit machine, it throws "object not set to an instance of an object" when it gets to the line where it's trying use the connection string.
This is the 'object' which is not set in Windows 7:
The machine.config has the same connection string set up on both machines.
A .Net 2 website transferred to the Windows 7 machine has no problem accessing the same connection string.
I have tried a bunch of different permissions on the machine.config and its containing folders, and setting the service to log in as Admin, but I don't know exactly what permissions are required.
I have a database on Go Daddy and my VS2008 app can not access it via web.config connection string. Of course runs great locally in development. I copy/pasted the connection string information from Go Daddy exactly into my web.config file. Web site runs fine on the web but when I try to Login at my login page, i get :The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.
I used VS2008 to create the .sql script files and uploaded them to Go Daddy and the Go Daddy people say everything works as they and I can both Login to the database from within GoDaddy.The database i am trying to access consists of the a ASPNETDB.mdf and another Database.mdf together as one in the Go Daddy database.
here is what i used: <connectionStrings><add name="superskin" connectionString="Data
i'm working in vs2010 and am just about ready to deploy a Web sitei've read elsewhere that i should be able to add a web.release.config file and should be able to select it for the release buildso i added a web.release.config file right below my web.config file but it doesn't show up in my Configuration Manager
