I am developing an ASP.NET web page for sending sms using gsm modem. I have connected my phone using data cable to my PC.What are all the other requirements needed?I need to write vb.net code in code behind file to send SMS Using GSM Modem. What steps do i take to develop my web page for it.
Is it possible to detect GSM mobile (any kind) which connectedthrough serial port to computer and then be able to send SMS throughthis mobile phone to other mobile phones from asp.net website running under iis(only 1 system), could anyone help me and guideme, I wrote a program which could open COM port but still couldn't detect mobile phone and send SMS through it.
I wanted to send and receive SMS from my application, as of the need i bought a Wavecom GSM Modem. I also downloaded ActiveXperts Toolkit for communicating with GSM Modem, i can be able to send SMS through the GSM Modem. have problem with receiving SMS.
there are many samples for sending sms from application through GSM modem.is it possible to send email through GPRS activated sim to others. is there any application regarding this developed in c# asp.net.
I have a new account with no-ip.com with Dynamic DNS Update Clients installed in my pc. my url is [URL] when ever i enter this ip in browser it shows me my modem dsl router setup page.. i need to show my webpage which is in IIS. For local it would be like this: [URL] i need to show this webpage [URL] (all over the world if user enter)-> [URL] So how to Achieve this.
When I run the application using the Web Developer it works fine. However when I run it using local IIS I get the following error:
The resource class for this page was not found. check if the resource file exists and try again. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: The resource class for this page was not found. heck if the resource file exists and try again.
Source Error:
Line 81: private void PopulateLanguageList() Line 82: { Line 83: DropDownListLanguage.Items[0].Text = (string)HttpContext.GetLocalResourceObject( Line 84: "Default.aspx", SelectLanguage, Thread.CurrentThread.CurrentCulture); Line 85: }
Stack Trace:
[InvalidOperationException: The resource class for this page was not found. Please check if the resource file exists and try again.] System.Web.Compilation.LocalResXResourceProvider.CreateResourceManager() +4038050 System.Web.Compilation.BaseResXResourceProvider.EnsureResourceManager() +23 System.Web.Compilation.BaseResXResourceProvider.GetObject(String resourceKey, CultureInfo culture) +24 System.Web.Compilation.ResourceExpressionBuilder.GetResourceObject(IResourceProvider resourceProvider, String resourceKey, CultureInfo culture, Type objType, String propName) +32 System.Web.HttpContext.GetLocalResourceObject(String virtualPath, String resourceKey, CultureInfo culture) +56 APPortal.Login.PopulateLanguageList() in c:inetpubwwwrootAPPortalDefault.aspx.cs:83 APPortal.Login.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootAPPortalDefault.aspx.cs:20 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42 System.Web.UI.Control.OnLoad(EventArgs e) +132 System.Web.UI.Control.LoadRecursive() +66 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
I created a website using VS2010. When I run the website using built-in web server, everything works fine. The website recognizes javascript and aurigma uploader. When I publish the website to local folder and tried to access using IIS 5.1 on local pc, the java scipt files did not work. I was getting yellow triangle sign at the bottom of the page indicating the object is expected. I tried to look online but i could not find any answer. I have included jquery and javascript file in the header section of master
There is a hyperlink to a local file...for instance....C:/text.txt. This is not possible, because ASP.net does not allow links to local files. But, links to files on network drives such as W:/test.txt are working ok. how does the browser know which drive letter is local,and which is networked? How does it know that C: is local or D: is local etc, and that W: is a network drive?
How do I get the smtp server address for the local machine? I want to my email address on a windows form and have the user send me an email and I need to be able to get their smtp server address programatically to do this. I tried this:
System.Net.Mail. SmtpClient smtpc = new SmtpClient("127.0.0.1"); smtpc.Send(email);
I am trying to determine if it is possible to add a concatenated string to one of my local .resx files. This example should clarify:
Let's say I have a simple ASP.NET webpage composed of (1) a label whose text is an important keyword (2) an input with required field validation and (3) a button that causes validation to occur:
Now, inside the resource file for this page, we want to localize the strings for the page's controls. However, for our error message, we want to use the literal name of the input's label. This is were my question is.
PSEUDOCODE: myPage.resx
(1) lblMyInput.Text = "Name" (2) rfvMyInput.ErrorMessage = "The " + lblMyInput.Text + " field may not be left blank." (3) btnSubmit.Text = "Submit/Validate"
Is there any way to pull off this type of concatenation of one resource file's string into another string within the same file?
First off, i'm fairly new to programming, I've built a few asmx web services but I am a little lost regarding how I should set up a WCF web service. I've tried to research this over the past couple days by reading through a lot of the documentation/articles/videos on MSDN but I'm still a confused.ince my current web services are hosted on a separate box using IIS, from what I understand I need to create a WCF Library, then reference the Library in another WCF App and then host that app in IIS and reference the WCF App from my Front End? Seems like an extra step to me...? Not to mention a pain when developing on my local box.
Initially i had vs 2005 and vs 2008 installed in my machine and both of them were working great.Yesterday i installed vs 2010 in my machine and then i saw that it was also working great.Today when i tried to add a local database in a project that i was working for in vs2008,then i get this error:
then i tried to add a local database in vs 2005 and again i get the same error This error is not letting me to add the local database
but in the past i had all three vs installed in my machine at the same time and they did not cause any problem like the one i am facing right now.
I wanted to run a .net application on a laptop. I created the application(aspx pages and SQL database) on a computer that has VS 08 installed. Now i wanted to run this application on a laptop that does not have SQL sever 2005 installed.
As far as the aspx pages if i publish them to a zip drive copy it to my laptop and go into IIS and define a new virtual directory to point where my pages are that should work RIGHT??
Now for the database i don't know what i need to do
It seems that using Local resources is much more complicated when using Razor. I recently converted an MVC 2 app I was working on to MVC 3. The conversion went well but accessing LocalResources doesn't work and I can't get it to work. In MVC 2 I created an App_LocalResources folder in the /Views/Home folder and created an Index.aspx.resx resource file. In the Index View I could access the local resources with
<%: GetLocalResourceObject("FirstName") %>
Simple, out-of-the-box functionality, as it should be. Razor doesn't understand this. It seems that in Razor you have to use @HttpContext.GetLocalResourceObject(<virtual-path>, <resource-name-key>). I've tried everything for virtual-path but nothing seems to work ("~/", "~/Views/Home/App_LocalResources", etc.). I tried to directly access the resource file by providing the complete namespace, like you do with global resources (which works fine in Razor), but then it errors stating that the culture is required. Intellisense allows you to build the reference to the resource property but Razor doesn't understand it.
Of course an alternative could be to simply use the ASPX rendering engine in MVC 3, but I want to use Razor. Does anyone know an out-of-the-box method (not some exotic work-around) for accessing the LocalResources in an MVC 3 app using Razor?
In .Net I can use the "~/image/image.png" as a reference to a graphic in the image file in the image folder from whatever file or folder I am working with. How do i use this type of reference in a javascript where I need to reference a source file?
I want to test MySQL with ASP .NET locally. However, I do not want to host a local server. How would I simulate a local MySQL server using files or something similar?
Is there a 'correct' way to get the proper web address for a file under an ASP.Net application? For example, I have content in '/Content/Images/Gallery/2010-01-17/small/', and I would like to iterate through all of those files, and output to the browser a link.
Now, I can do it manually by working out the path from the files FullName or I can do it from knowing the current directory, but is there a proper ASP.Net way to do it?
As you can probably tell, I'd rather use the provided method if it exists :)
We have a web service running on the server. We want to use the service in local machine. Could some one kindly give all the steps to get the methods availble in the client.
We have created web methods in the server. And trying to access the same thing on the client. I can literally access those methods using the refernce variable of the server. but when I try to run it , it comes up with run time exception unable to connect to remote server.
I need to send an email to ALL the above unique email addresses in column 2, listing all the logons for that person. My question is, in terms of best practice, Whats the best way to do? Should i either
1) Query the local datatable in the application, if so how do i query a local DataTable object? 2) Modify my initial query to return all the unique email addresses and then again query to retrieve the logons for that email address inside a for loop for eaxmple.
Was trying to minimise the hits to the database, whats the preferred way to do something like this?