Get Rid Of Virtual Directory Name From Request.ApplicationPath?
Mar 23, 2010
I have developed web application that is hosted under a virtual root directory named "MyVirtualRoot".
So whenever I use Request.ApplicationPath it returns "MyVirtualRoot" which is theoritically correct. But whenever I redirect the user using response.redirect the address bar shows the name of virtual directory.
For example when I say:
Response.Redirect("~/Cart.aspx", false);
The path in the address bar appears as www.mydomain.com/MyVirtualRoot/Cart.aspx which is theoritically correct but I want to get rid of the "MyVirtualRoot".
How can I do that without making changes to all the pages with minimum impact. I am sure there is some way to achieve this but not able to get through.
View 8 Replies
Similar Messages:
Mar 25, 2010
Is it safe to use such code?
Response.Cookies[cookieName].Path = Request.ApplicationPath + "/";
I want to know about all corner cases.
View 3 Replies
Nov 10, 2010
I have a WCF service in a virtual directory that is called in the code behind of a page that is in the parent directory, when i debug the code i can see the wcf service is being called, however when the service calls Membership.GetUser() it alway returns null. The user has already logged in to the asp.net site. When i call the service via jquery it does pick up the correct user, but i need to be able to call it via the code behind as well. I am developing in .Net 3.5 how i can make the Wcf pick up the logged in user?
View 3 Replies
Oct 27, 2010
I made a web form on a development website of mine (we'll call it dev.somewhere.com) and tried to publish it out to the web (we'll call it [URL]) in a subfolder. I named it default.aspx like I was supposed to and it worked flawlessly on the dev site. When I published it out the web, I wound up getting the following error when trying to get to the subfolder: [URL] Directory Listing Denied
This Virtual Directory does not allow contents to be listed. Confused and flustered, I tried to go to [URL], but I wound up with some error that won't tell me the problem. Instead it tells me to change the my web.config to read <customErrors mode="Off"/>.
View 1 Replies
Feb 13, 2010
As virutal directory points to physical path of the application, so if the IIS root directory is C:inetpubwwwroot and the application is stored at D:websites, than we need to create a virtual directory but if the application content is placed at C:inetpubwwwroot, then why still need to create virtual directory.
View 3 Replies
Jan 30, 2010
I'm using Request.ApplicationPath to learn the name of the Virtual Directory in which I'm running. Is there a more reliable way?
View 2 Replies
Oct 13, 2010
I set up a Virtual Directory called 'Site'. I browse to [URL].In the source file, the relative paths are coded as '/Page1.aspx', for example, and it has worked in the past.I'm using Win XP Pro SP3 and IIS 5.1. Any ideas on what might be causing this behavior?
View 3 Replies
Feb 10, 2010
How do you go about reading and writing to a virtual directory in iis 7?
View 2 Replies
Jan 13, 2010
I've below error message:
***********************************
Error 1 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. C:PdfViewerPdfTestSiteWeb.Config 28
***********************************
When I double click the error it goes to Web.Config file to tag:
<authentication
mode="Windows"/>
The application name in IIS is PdfViewer
View 2 Replies
Mar 1, 2010
My basic question is, can a virtual directory in IIS point to a physical path that's not on the local machine? For instance, right now I have a virtual path /NaturalGasReport/NYMEX which points to physical path C:Program Files (x86)NymexSettleNATGAS_REPORTNYMEX, but I want it to point to a physical path on a difference PC on the same network. Is this possible? (I know I can just try it out so I apologize for asking but I thought it would be best to get an explanation along with "yes" or "no"). If you want more detail, this is what I need to do. To make a long story short, because of a vendor product we are using that won't run on a 64-bit operating system, I have to run a program called Generate_NGReportData.vbs (it's a vbscript program) on a PC I will call 28. It uses a vendor product which produces jpg files which are graphs of the Natural Gas market. The machine where I wish it could run is called RTEST01 but this machine runs a 64-bit OS and the components won't work there. RTEST01 has the databases. So, I created a datasource on 28 which points to RTEST01's database. The vbs program will read the data, generate the reports, and write one row to a database table on RTEST01. RTEST01 has to run the complimentary program which sends these reports (via email). 28 is not an email server so it can't email the reports. So on RTEST01 I will run Send_NaturalGasReport.vbs. This program creates an email body of html. The html references [URL]NaturalGasReport/NYMEX/" & Day(nymex_update_dt) & ".jpg which is a virtual directory pointing to C:Program Files (x86)NymexSettleNATGAS_REPORTNYMEX. I need it to point to the folder and files on 28.So if my initial question has a simple yes answer then I am all set. If not, examine my architecture and propose an alternative solution.
View 10 Replies
Nov 2, 2010
First of all, I am trying to deploy a web application, without virtual directory. Yes...I have no other option but to try this due to some non-tehnical constraints.
Now, I have developed an ASP.NET 3.5 Web application, which works fine on my local ASP.NET Development Web Server. Then, I published the application to the actual webserver using the VS2008 Publish... option. When I got some error messages related to web.config, I removed the corresponding items from the web.config.
When I can access the page but the code inside the page doesn't really work. When I open the Default.aspx, which is directly under the website, I keep on getting this error:
Compiler Error Message: CS0246: The type or namespace name 'DynamicLoadControl' could not be found (are you missing a using directive or an assembly reference?)
This DynamicLoadControl is a class that I have developed and is present in App_CodeDynamicLoadControl.cs file (in the same namespace).
I have searched a lot and tried everything except creating a virtual directory. First of all, is it possible to have asp.net 3.5 website without virtual directory.
View 3 Replies
Jan 12, 2010
While creating virtual directory in IIS i am gettin "Failed to Access IIS metabase" problem can anybody help me regarding this issue
View 2 Replies
Jan 12, 2011
m new to .net framework 4 and iis 7.I created a webapplication in VS2010 with C#.I created the virtual directory for that web application in my IIS (IIS 7).when i tried to open the page by using virtual directory, it is displaying the following problem.Server Error in '/' Application.
Configuration Error
Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
[Code]....
Source File: E: estweb.config Line: 12 Show Additional Configuration Errors:
View 3 Replies
Apr 29, 2010
Assuming here that I have full control over the server.I'm looking for a sample code that would help me understand how to create a new virtual directory on the IIS pointing to say C:
View 4 Replies
Jun 3, 2010
I'm new to IIS, I just want to create a virtual directory in IIS. I'm using WINDOWS7.When I Browse my Default file it throws the folling Error,Error SummaryHTTP Error 500.19 - Internal Server ErrorThe requested page cannot be accessed because the related configuration data for the page is invalid.
View 8 Replies
Aug 5, 2010
Anybody know how to setup a virtual directory in IIS Express for things like Shared Resources? I can't figure out where to set it up in Web Matrix?
View 5 Replies
Dec 12, 2010
im a little bit angry, because i realy don't know how i can access a virtual directory a created in the IIS.
For example i created virtual directory called "Images" in the IIS under my default website. The "Images" folder is connected with my physical harddrive "D:Bilder".
Now how do i access this folder from code behind? I really tried everything but i can't load a image from this virtual directory :
View 5 Replies
Feb 2, 2010
I have a few applications that need to share a common set of markup.
Scenario: I might have www.site1.com, www.site2.com, and www.site3.com. On all sites, /care/contact-us.aspx and /care/faqs.aspx will be exactly the same, but every other page will be totally different.
Issue: I'm attempting to not duplicate the .aspx files for each of these sites and would like to have a /care virtual directory that would include contact-us.aspx and faqs.aspx that each of these sites would use. I have seen this post from Scott Gu, but I'm looking for any other solutions/ideas.
Question 1: What would be the best way to set this up to share the /care directory?
Question 2: Any about also sharing the code behind.
Background, if you care: In a legacy application (asp classic/vbscript), we have the ability to use a /common virtual directory for sites to share common markup and code (since they're all mixed together in .asp files).
View 3 Replies
May 4, 2010
I have a CMS application that manages multiple websites, today whenever i change the codebehind of one of these websites - i have to rebuild the dll for all websites, deploy it - this disconnects all current sessions and is really bad.
The iis is configured to listen to all domain requests, if the request is to one of the websites' domain , the application rewrites it, or example, if someone requests for http://www.example.com, and example.com is configured in the application to be website 12, it is rewritten to http://www.example.com/websites/12/default.aspx.
This is done for all websites.
We want to seperate the dlls of the websites from each other, and from the main CMS, we have a virtual directory to each websites, but when trying to rewrite to it, we discover that IIS support this (we get an "Could not load type '_12._Default'". error).
How can we perform this rewrite so it does rewrite to virtual directories, or if anyone has any other solution for the initial dll seperation problem.
View 2 Replies
Feb 8, 2011
I was running it directly from Visual studio which resulted in this error :) I can clearly see the images when I run it directly from IIS!
I've created a website under IIS and have successfuly pointed it to my project. The path to my project under IIS is:
[URL]
I, then created a virtual directory under website cartoon named cartoon_images but it creates it under localhost:36011/cartoon_images/ instead of localhost:36011/cartoon/cartoon_images/
As you can see, virtual directory is under the website "cartoon" but I can't access it as cartoon/cartoon_images/
I'll need to give links to this virtual folder but I can't do it in this case if I'm not mistaken.
View 1 Replies
Mar 12, 2010
I have a WebForm that contains the following definition for the FCKeditor:
<FCKeditorV2:FCKeditor ID="txtBody" runat="server"
BasePath="/fckeditor/"
Height="480px"
ToolbarSet="WebCal1"
>
</FCKeditorV2:FCKeditor>
This works fine in my VS2008-based web application. However, when I deploy it to a Virtual Directory in IIS, it looks for the FCKEditor files (e.g. javascript, stylesheets, etc...) in the /fckeditor folder, not in the /MyVirtualDir/fkceditor.
I've tried changing the BasePath to ~/fckeditor/, but then it won't work on my dev machine.
What is the right way to go, so that the FCKEditor maps onto the right directory. In my project the fckeditor directory is right off the root.
View 2 Replies
Jul 21, 2010
I have an asp.net mvc 2 app (using .net 4.0) that isn't routing correctly when hosted in a virtual directory. I have the following simple routing rule:
routes.MapRoute(
"Default", // Route name
"{action}", // URL with parameters
new { controller = "accounts" } // Parameter defaults
);
I'm trying to resolve [URL]. Where "accounts" is a virtual directory. If I put the app in the root of an IIS website it routes fine for [URL], but if I put the app in a virtual directory I get 404 errors. I've debugged and it is executing global.asax and configuring routing when in the vdir. Is there something special I need to do for routing in a virtual directory? FYI. I'm using a vdir because the root has wordpress in it. one more thing is that if I specify a default action in parameter defaults, it will execute the default action/controller, but it never matches anything else.
View 2 Replies
Jan 21, 2011
I have a site on godaddy hosting and it is not the primary domain - that is the domain points to a folder on the server. The site works fine but I just hate that the folder name shows in the URL. I found out that ActionLink emits the vitrual folder in url. For example - www.mysecondsite.com -is on the server as a folder secondfolder under the root(www.mainsite.com), so it is like [root]/secondfolder/. But when I click a link the url displayed as http://www.mysecondsite.com/secondfolder/Home/About view source shows "/secondfolder/Home/About" rendered. How do I stop "/secondfolder/" from rendering in the output.
View 4 Replies
Oct 17, 2010
I've created a virtual directory on a hard drive where I keep some jpg files, the problem is when I access a page that links to a jpg file it asks for a username and password, is there anyway to stop that from happening?
View 2 Replies
Sep 19, 2010
I am working in a .net C# .In my application I have to create in theIIS>local computer>Web Sites>Default Web Site - virtual directory and also I want to be able tochange properties of this vitrual directory (All process of creation virtual directory in the IIS I want to do programmaticaly).
I had make a program in C# for create a Virtual Directory.But i didn't able to edit its property..
After this i have to implement all this program in .Net Remoting 0r WCF.
View 1 Replies
