Network BIOS Command?
Mar 15, 2010what this error means ----> the network BIOS command limit has been reached.
View 5 Replieswhat this error means ----> the network BIOS command limit has been reached.
View 5 RepliesI am running Visual Studio 2008 on a Vista-business 64-bit system Virtual Machine setup, which I access via Remote Desktop Connection from my home system.
When I try to publish a website on my virtual machine, I get the following message:
"Error 1 An error occurred loading a configuration file: Failed to start monitoring changes...the network BIOS command limit has been reached. For more information on this error, please refer to Microsoft knowledge base article 810886"
I have read the KB article and implemented the specified changes, but I still cannot publish my website. However, when I work directly on my local computer (i.e., not on the Virtual PC) I can publish the website without any problems. Also, on my Virtual PC system, I can publish simple websites without any problem--I just can't publish my more complicated website on the Virtual PC.
I have looked at another forum, [URL], but none of the posts there provided information that could solve the problem for me.
my website just started throwing this error whenever I try to debug. The full error is ...Parser Error Message:An error occurred loading a configuration file: Failed to start monitoring changes to 'path to my server' because the network BIOS command limit has been reached. For more information on this error, refer to Microsoft knowledge base article 810886. Hosting on a UNC share is not supported for the Windows XP Platform.
Checked out the article, but doesn't seem to apply, as my pc hasn't changed recently... [URL] why it was working fine just a few minutes ago, and now it isn't? The code on the site is working fine, it's just when I'm trying to debug.
My ASP.NET MVC 2 application runs under built-in local NETWORK SERVICE account. I want to set up access permissions for the folder which resides in another computer, but in the same domain. I located that folder right-clicked to open its properties form, clicked to Security tab and pressed Add button which displayed Add user form with correct domain name in the location field. I referred to the account with following syntax:
<domain name><server name>$
because I learned that NETWORK SERVICE account uses machine account when connected to other computers in the domain. However, the system couldn't find the account, so refuses to add the account. Without the domain name it adds a user, but that user seems to be local user, not web server's NETWORK SERVICE account. What am I doing wrong?
By the way, the above syntax worked when I created login for the sql server which is different computer from the web server.
I want to issue an INSERT command for an SQL Server table using DataAdapter without first issuing a SELECT command. Could anybody send me lines of code to handle this? Also how do i manage INSERT into selective table columns (I have 10 columns but i only want to update 2 of them)?
View 2 RepliesI am working with odbcCommand class, in one case I got error that QueryTimeout Expired. Even though this SP is taking only 3-4 secs in DB to execute these specific values, When I set the CommandTimeout=0, then it worked fine.
1)Is it necessary to always use this property while working with Command Class.
2)If it is not suggested to use, but still if I use it then how it will impact the performance.
Below is my code sample.
OdbcConnection conObj;
OdbcCommand cmdObj;
OdbcDataAdapter daObj = new OdbcDataAdapter();
public DataTable GetIFAContractNoteData(string RecipientIDIFACN, DateTime BatchDateIFACN, int TransmittalReportIDIFACN) {
conObj = new OdbcConnection(GlobalVariables.strDsnName + ";" + GlobalVariables.strDsnDataBase + ";" + GlobalVariables.strDsnUserID + ";" + GlobalVariables.strDsnPassword);
[code]....
[Code]....
Using above code, I got succeeded in printing PDF file through command line. But it runs the Acrobat Reader and opens Save dialog box.
In my case, I want to suppress Save dialog box and save the file on other location using c# coding. I mean I want to save a PDF file behind the scene.
I've recently started working in ASP.NET and RDBMS.I'm making a test form where I can do basic add,update,delete operations.I'm using OracleDataClient to do the DB operations.I was able to populate a listbox using OracleDataAdapter.
Now after clicking on update button,I intend to Update in DB.I've Dataadapter with it's update property.But the update query is not happening.The examples I saw over net all have Select command before Update.Is it actually like that or am I missing some point.
How does Oracle DataClient work with Insert,Update,Delete Commands.
i'm trying to issue a select command in my app soi could execute the command and retrive the data into a string variable.the problem is that this command is overloaded with DataSourceSelectArgument and i can't figure out what it is.i'm using sql server express and when issue a n insert command for example sq.Insert(); i have no problems.this the command that's holding me:
SqlDataSource sq = new SqlDataSource();
sq.ConnectionString = ConfigurationManager.ConnectionStrings["CustomerDatabaseConnectionString1"].ToString();
sq.SelectCommandType = SqlDataSourceCommandType.Text;
sq.SelectCommand = "SELECT * FROM CustomerTable where customerID = 1";
string result = sq.Select(some overload that's stopping me);
how would i do my Gridview delete command like a update command?
im using a datasource... and my delete command is like my update command... so i can change the status into "INACTIVE"...
DeleteCommand="UPDATE ACCOUNT_MAINTENANCE SET am_status = 'INACTIVE' WHERE (accmain_no = @accmain_no)"
UpdateCommand="UPDATE [ACCOUNT_MAINTENANCE] SET [account_type] = UPPER(@account_type), [min_deposit] = @min_deposit, [min_capital] = @min_capital WHERE [accmain_no] = @accmain_no"
when i press my delete command at gridview... the status changed into "INACTIVE" but when i refresh or press f5... it automatically update the status into "INACTIVE" also...
ave never used ajax.... I'm currently putting together a little web app that basically calls a program on the server itself (a command line tool) and displays the output to the web page.When the command line tool is run from the command line, it outputs status messages as it does it's thing... as it is now, my page just displays all the output when it's done. What I would like to do is show each line of output on the web page as they happen, just like when run from the command line. I'm guessing ajax is what I need... can anyone point me in the right direction for this specific scenario (user clicks button, output streams to web page as it happens without full page post backs)... a good example would be how ping.exe displays it's output on the command line
View 2 RepliesI have Survey web applications and i need to install it in the local web server in my company
the problem is what correct code to get the real ip for the machines to prevent vote more than one for every employee
note: the company have domain controller and all user belong to Group Policy. I try many Code like
Request.Servervariables("REMOTE_ADDR")
HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
no correct result give me 127.0.0.1 or the server IP
I need to show printers installed in network. I used the below code to show printers but locally it shows network printers, but when hosted in IIS it doesn't show network printer.(shows only local printers).
[Code]....
Here if ((bool)mo["Network"]) is used to show only Network printers.
Is there any way to get network printers in ASP.NET?
I have to access a XML file in the network and do the changes in the file and then save that file back.
The coding that I have used is
[code]...
Note: The file I am accessing is been given full permission , I have also given impersonation but I am geting the above mentioned problem
how can i map a network driver programmatically from my asp.net (vb) and download files from the maped driver? is there any code sample anybody can provide me
View 11 RepliesIs it possible to know network card id of the user host computer from where the request is coming like IP address. I am interesting to know if it is possible at IIS or asp.net level or any other possible way of knowing it?
View 2 RepliesI am using Elmah in one of our production deployments and would like to secure the module to the local network only and not expose it to the public. I am aware of the remote logging option that can be turned off and also asp.net authorization, however I am interested to know if there is any support in Elmah's configuration to bind to a secondary NIC/network card which only faces the internal network ?
View 1 Repliesi hae a doubt in my web application i place two network tags in smtp like this...
<system.net>
<mailSettings>
<smtp>
<network host="webmail.xxx.com" port="25" userName="info@xxx.com" password="asdf" defaultCredentials="false"/>
<network host="webmail.yyy.com" port="25" userName="info@yy.com" password="asdf12" defaultCredentials="false"/>
</smtp>
</mailSettings>
</system.net>
My asp.net web app is hosted on this URL on my local machine:
http://localhost:45433/
I want to access the same application from a different computer on the network. I tried replacing the localhost with my IP but it did not work.
UPDATE 1:
Now, I am getting this error:
Login failed for user ''. The user is not associated with a trusted SQL Server connection.
I used code below to catch user's network login ID. It is working in XP but not working in Win 7. How to update it? (I use VS2008)
UserID = Page.User.Identity.Name.ToString
How to get IP list of a client machines in a network
View 1 RepliesTrying to find code to basically stream audio and visual streams over a network can't find proper examples to firmly get a good understanding of how best to approach the development. I've looked at direct sound and Direct X examples but nothing has been concrete enough. Trying to basically create a web page in C# that will be able to stream audio and visual to users.
View 2 RepliesI do not want to do my development based on an emulator, so I want to be able to have my phone (Android), to connect to my local PC to make sure what I am developing comes out the way I want it to.
Issue #1 - I need to be able to connect to my network, not internet, I can't have my PC internet facing, this limits me from opening my PC to the internet.
Issue #2 - No WiFi allowed at my work, security issues.
Issue #3 - I can't publish this to a internet facing site, since the procedure to get it to one, take a few days each publish and will put my development to a crawl.
What I'm looking for, is a way to get my phone to connect to my local PC, maybe via USB/Bluetooth but have access to my local IIS.
I want to use C#/ASP.net to find out whether the user browsing the website is on the same network so that certain links are only displayed while in the office (to those who have access to them).
Anyone accessing from within the office will be doing so by going to it's local IP address (i.e. 192.168.x.x) whereas external users will be browsing to the public domain name.
All I need is some way to differentiate between the two types of user.
I am maintainign a ASP.NET app. Some of users action are pretty slow; one of my colleagues claim it is caused by network bandwidth as some used dll will connect over to internet to get data.
How could I verify it's really due to network issue? Any tools can peer the network connection during the process?