I am try to connecting socket with remote machine where i specify external ip address of remote machine i.e 192.*.*.*,Following is my code snippet
m_Monitor = New Socket(AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.IP) m_Monitor.Bind(New IPEndPoint(m_IP, 0))
"The requested address is not valid in its context"I have off firewall of both pc(Remote and local).
I have ASPX For Which send the Data to Email Address
while working with Development Machine it is Working fine
But when Going to Deploy on the server it showing the Following Error
I am using Windows'2003 with IIS6
The requested address is not valid in its context 192.168.0.249:25
Stack Trace:
[ConnectionException: The requested address is not valid in its context 192.168.0.249:25]
cpSphere.Mail.TcpSocket.HandleException(SocketException e) +397
cpSphere.Mail.TcpSocket.Connect(EndPoint RemoteEndPoint) +230
cpSphere.Mail.TcpSocket.Connect(String ServerName, Int32 Port) +360
cpSphere.Mail.TcpSocket.Connect() +118
cpSphere.Mail.Smtp.Esmtp.Connect() +132
[Code] .....
I am encountering an error when attempting to log into a web app (via a login page) on one of my servers. The web app is an IMAP4 client under development that should connect to the mail server currently running on the same machine. I am successful at connecting to the mail server from my development workstation running an IMAP4 desktop client under similar development.The error is... An address incompatible with the requested protocol was usedThe login page works fine in my development environment on my local workstation (connecting to the local mail server). A little research suggests the error has something to do with IPv4 vs IPv6 addressing, but I'm not sure. I have 2 network adapters in this server, for each of which IPv6 is not enabled. I have successfully reset the TCP/IP stack on the server (netsh Winsock reset) but still the error returns. Only one of the adapters is enabled and being used.
View 4 RepliesI have a previously working ASPX website which also supports AJAX. However, we just upgraded our SQL Server to a new version and now this website is no longer working. I believe the problem is that now we need to again restore original SQL accounts and settings prior to this upgrade. This website also uses AJAX. Which accounts need to be created to fix this problem? When I navigate to this URL, I get the message below:
The address is not valid.
How me can validate a email textbox to take only valid email address if error occur it show the error message in this textbox or as a tooltip. because in the form there is no space to show error message.
View 1 RepliesI have written simple HttpModule. context.Response.Output.Write is working fine. but not context.Response.Write().
View 2 RepliesI have managed to expose the MEX endpoint of my WCF service and I can access it with the address like [URL] (example) and get the WDSL. So no problem there.
However, my WCF test page shows the address wrongly by using the server's name instead of the DNS name. And if I click on the link on the test page it won't work (can't get WSDL).
The WCF test page looks like this:
MyService Service
You have created a service.
To test this service, you will need to create a client and use it to call the service.
[URL]
The WCF service is hosted in IIS6. I would like to have a test page with the correct WSDL address so users can see the WSDL quickly in the browser just by clicking on the WSDL address.
In short: How can I change the MyServerName to inter.mycompany.com on the WCF test page? Can this be specified somewhere in the Web.config?
I am trying to pull entries from a database based on the current users IP Address. Here is what I have so far:
[Code]....
I am receiving the following error: Cannot find either column "Request" or the user-defined function or aggregate "Request.UserHostAddress.ToString", or the name is ambiguous.
Is it possible to do this? Should I try to access this information another way?
Is it possible to find out the clients IP and possibly MAC address from non IE browsers (i.e. without using ActiveX)? If so, how?
View 1 RepliesHow do I obtain the IP address or MAC address or some Unique ID of a device within a mobile app, either client or server side?
We are developing a web application targeting iPhone, BlackBerry and Android, generally device independent, and we are looking for ways to uniquely identify a device for added authentication purpose. Is there a way to uniquely identify a mobile device, regardless of the make and model?
My Question is can we extend one context to another in Entity Framework 4. Following is the problem background.
I am using EF4 for developing a Web-Application. My Web Application has 3 projects.
One project is for storing candidate CV information.
Another project is for storing customer information.
Final project is called CORE. this CORE contains a edmx file that should be extended by CV and CRM.
As an example email address table can be shared by both customer (CRM) and CV. To share one table with another, we should be able to extend one context (CV context) with other context (customer context). Could some one having experience using Entity Framework share your experience with me to find whether this is possible.
We have 3 edmx files in three class libraries:
Person class library(Core) with core.edmx-Basic details related to a person(name, email) CV Class library with CV.edmx wich have CV related data(Experiance,skills) Customer Relationship management system(CRM) which have customer data(sales data...)
Then we want to use core class library edmx file(Core.edmx) with cv.edmx (basically cv tables should be able to use tables from core tables) . Same way we want to use the core.edmx with CRM.edmx for the 3 rd project
Using ASP.Net, I am trying to determine the actual URL requested by the user. For example if I type the following into my address bar: [URL] Fiddler shows me that this is the URL being sent over the wire however by the time it reaches ASP.Net all of the variables in HttpContext.Current.Request are showing this URL: [URL] The IIS logs show the same cleaned up version of the URL as ASP.Net. This causes some of the relative links on the site to break so I would like to at least detect and log these requests. I am using IIS7 on Windows 7 and .Net 3.5 SP1. What is doing this translation and how can I find out the original URL?
View 1 RepliesI need to present google or some other public page on my page div without using iframe
My hints - is a cross domain issue and for bypassing credentials use proxy (I think using .ASHX file - generic handler)
Ok I know how to call the ashx from client but how to open the requested url??? What to do on the handler??
Running Windows Server 2008 R2 (IIS 7.5). This is happening at a client's site and works fine on our internal servers with the same OS configuration. We are using the following work-around for now:Modify the Advanced Settings of the Application Pool that the site uses, and change the Identity used by the Process Model from ApplicationPoolIdentity to NetworkService
View 1 RepliesI'm looking to pick brains on the following.I have a page which contains numerous links to other websites.I use a redirect to get to the destination page so I can run any code prior to the redirect. What I would like to do is attempt the redirect, but then display an error message if it doesn't happen in say 20 seconds.I already have code to check a link so I can check, then if available redirect, however I would prefer to redirect and catch an error.
View 1 RepliesComplete newbie with asp.net using 2008 express edition.I made a master page and one simple page, and used the ftp copy web site tool to load the pages to my web site.When I try to open the one page, I get the message has not been pre-compiled, and cannot be requestedI havedone some searching on the error message, and most places talk about missing things from the Bin directory. I don't have a bin directory on my local machine.
View 8 RepliesMy web application [URL] is currently requesting the WebResource.axd file like this:
<script src="/WebResource.axd?d=xxx" type="text/javascript"></script>
As we're using urlrewiting in a Netscaler to forward all requests for the "/social" folder onto a seperate server farm containing this app, the "/" root path won't resolve correctly as it will be requesting the resource from the something.com app.
Therefore I need to change the url of the requested script to either request it explicitly:
<script src="/social/WebResource.axd?d=xxx" type="text/javascript"></script>
or to request it using a relative path:
<script src="WebResource.axd?d=xxx" type="text/javascript"></script>
So far I've looked at overriding the render method, using a control adapter and various other things but haven't really got anywhere as of yet.
The requested document was not found on this server.
View 6 RepliesI want to know what will happen when asp.net page is first requested from browser.i.e ASP.Net Page Request Architecture
View 2 RepliesUsing ASP.NET 3.5 / VS 2008.I have an app that has been deployed on 13 different servers at client sites with no issues. One of the modules is an aspx file that generates a crystal report.When I deployed the app to a Windows 2008 server-64 bit/ IIS 7, the aspx page that uses crystal reports errors out with the message:The file 'xyz.aspx' has not been pre-compiled, and cannot be requested. (All other aspx pages load just fine).
View 1 RepliesI have an asp.net application that I wrote that uses query parameters and I'd like to use routing to use a different URL. I'm missing something, though, after reading through numerous walkthroughs.URL that I'm now using with query parameters: http://mywebsite.com/app1/default.aspx?d=dept&c=category&p=page.htm I would like to use routing to have a URL of http://mywebsite.com/app1/dept/category/page.htm and have the same code behind work. Currently it doesn't work at all. Not sure what else I may have to do.
View 7 RepliesSo I'm trying to make my own forum signature generator for some friends, and I've gotten most of the work done. My real issue now is refreshing the information when the image is requested from my server.
Basically, I'm looking for someone to push me in the right direction on how to have the image refresh from the datasource when it gets requested, but only if it has been more than 5 minutes to prevent an overload.
I ran into this error today and much googling didn't get me the answer. I have been for years now publishing this particular site by simply doing "Publish web site" and then supplying it a UNC path, then I go to the server delete the old bin and copy to the new bin folder to the live site, this has always worked except today I started getting the "cannot be requested" error for certian pages in certain directories. Everything else worked and after several attempts nothing else broke and only these same certain few pages where screwed up - there was nothing exciting about any of these pages, in fact they were part of the admin portion of the site and were very simple
View 2 RepliesI recently converted an MS Access database to a Sql Server 2008 db using the MSSMA tool, and i am currently still trying to connect two of my web apps to this database. One of them is an asp.Net web application and the other is a classic asp web app. Both apps used an OleDb provider to connect to the ms access database, and my purpose is to migrate the database without having to modify the applications code.I'm using Windows Integrated Security in combination with the NETWORK SERVICE account. Connection to the asp.Net app is behaving normally. I use the following connection string within the web.config file
View 4 RepliesUnable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.i was searching a way to catch the exception to see exactly what was generating this problem... later, i was able to catch the exception and this is the message that theReflectionTypeLoadException catch:ould not load file or assembly 'System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file spec
View 2 Replies