Speed Up Compilation Of Hundreds Of User Controls?
Nov 8, 2010
I'm developing on a site with a few hundred user controls. When debugging the web app (pressing F5 in Visual Studio 2008), it takes quite some time to compile it and start Cassini. I've noticed that every user control is compiled to a separate dll in temporary asp.net-files and it takes quite a lot of time.
Is it possible to speed up this process, possibly by compiling to just one dll, and still be able to debug the web application?
Recently, I added a massive amount of new languages (as RESX files) to an ASP.NET Web Site project in VS.NET 2010.
The project has approximately 50 ASPX pages and did build rather fast, before I added the languages.
Since the languages were added the compiler takes several minutes (well, at least 1-2) until the browser sees a page.
Now I'm currently investigating, whether I could speed up compilation time inside my development environment. I can think of:
Leaving out the RESX files in VS.NET and copy them from another, external folder, when deploying to the web server, only. Change the project type from Web Site to Web Application.
My question:
how you would improve development speed of a large multi-language website in ASP.NET 4.0?
I could use some guidance on a better way get get my data than I am using. This way is taking nearly 45 seconds to get the data and bind it to a gridview here are my methods used to get the data
Sometimes my gridview can take a second or two to get into in edit mode, and other time it can be 5-10 seconds. Is there something I can do to make the transitions from each state more uniform?
We have an application developed on VS2008 [Asp.Net & C#], in this application we provide the facility to the user to write his/her business logic code. For that purposes we maintained a Businesslogic.cs file where user can write his/her code and our application build it as a BusinessLogic.dll file at runtime.
But the problem is when we introducing Linq statement/code into the BusinessLogic.cs file then it generated compilation error [CS1026 ].
Note that, when we build the dll from VS2008 environment then it working fine with the same code which we write into the BusinessLogic.cs & don't generated any compilation error.
Description: An error occurred during the compilation of a resource required to service this request. review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30456: 'Eval' is not a member of 'ASP.InsertLTAS_aspx'.
Source Error:
[Code]....
Line 99: <asp:TemplateField HeaderText="Mvalue" SortExpression="Mvalue"> Line 100: <EditItemTemplate> Line 101: <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("Mvalue") %>'></asp:TextBox> Line 102: </EditItemTemplate> Line 103: <InsertItemTemplate>
Seems to be having problems with my databind control that i have set in my gridview with edit and delete options?
I have a gridview that displays query results on a reporting page for a "home-grown" CRM application. From the gridview, a link can be clicked which opens a modal window that contains an iframe linked to a "details" page where record specific info can be viewed/altered. On the details page there are 10 or so dropdownlists (ddls) that are bound every time the page is called. The ddls are bound using a method similar to the example below. I am looking for a way top speed things up a bit. The details page could be called 10-20 times in one session and every time the page loads these ddls have to be bound from the same methods but for different records. What are some options for speeding up the load time for this page??
I am facing problem with images loading time. In my form I have image server control placed in repeater control. The repeater control every time binds atleast 300 images. When we want to see all the images at a time the page is taking lot of time(atleast 3 to 4 mins) to display. But I need the page should be loaded fast.
The image url is from physical location.And the information related to image is coming from database.
I am using .net framework 3.5 and C#.net as language in asp.net web application.
Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS0122: 'NovPotniNalog.CustomersGridView_RowDeleting(object, System.Web.UI.WebControls.GridViewDeleteEventArgs)' is inaccessible due to its protection levelSource Error:
[Code]....
Line 202:<div>Line 203:Line 204: <asp:GridView ID="ViewRelacije" runat="server" Line 205: BorderWidth="0px" Line 206: AutoGenerateColumns="False"
I want to delete a row in a way that it shows, but displays an error.
I've got extremely strange behavior on one of my pages. I was able to get a work-around in place, but I'd like to get input on why this error is happening (and why my work-around actually works).
(Let me also say that this is in no way, shape, or form my code...so please don't bash me too hard)
When loading the page, we're getting
BC30456 'InitializeCulture' is not a member of...
I worked through the tips here and nothing worked:
BC30456 Fixes
I was able to get the page back up and working by changing
I am attempting to build my first custom ExpressionBuilder and have created a new C# Class Library in my visual studio 2010 solution.
From the very beginning, I am doomed. I cannot seem to gain access to classes I need to accomplish, such as:
(a) using System.Web.Compilation -- the ".Compilation" is errored/underlined.
(b) using System.Web.UI -- the ".UI" is errored/underlined.
(c) using System.Web.SessionState -- the ".SessionState" is underlined.
Prior to any of these lines of code, I have a "using System.Web" which is accepted.
Following these errored lines, I try to declare the "[ExpressionPrefix("xxxxxxx")] and the public partial class xxxxxxxxxxxxxxxxxxx : ExpressionBuilder -- and both "ExpressionPrefix" and "ExpressionBuilder" are errored, as well (I'm assuming because I cannot get the correct references in my "using" statements).
When I run my web applicatin it is giving this compilation error..
CS0433: The type 'BusinessLayer.Videos' exists in both 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot888033a8963ffe48App_Code.zsu4f9h7.dll' and 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot888033a8963ffe48assemblydl35f298b28c3d2b1f_0c98ca01BusinessLayer.DLL' Line 36: static string VideoId; Line 37: public int count; Line 38: Videos obj = new Videos(); Line 39: TopRated clsTopratedBL = new TopRated(); Line 40: protected void Page_Load(object sender, EventArgs e)
i am developing a application in which i have used master pages and child pages....i have update panel and scriptmanager in the application but i am getting the following error on each page..
Element 'ScriptManager' is not a known element. This can occur if there is a compilation error in the Web site.
By default ASP.NET's compiled files (Along with VB or C#) are saved and created in C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesoot...Is there a way to change it? or is it recommended to keep it at default?I am asking about changing it because what if you format the c drive? or some other reason as keeping functional files in a separate folder away from windows files.
My web application (ASP.NET v3.5 / C#) dynamically creates other asp.net applications (creates aspx, aspx.cs, classes, web.config, project.csproj file etc.).The thing is even after I configure the 'new' application folder as APPLICATION in the IIS, When I try to browse it, I get the following parser error: Could not load type 'Template48.Template48' (where Template48 is my application).When I manually browse to the new application folder, and re-build it, all works perfect.How can I re-compile this WHOLE application, but in it's folder ?
I want to create a Asp.net web application in which, when the client opens it he will get an textbox to write his C / C++ code then on clicking SUBMIT I want to compile the code and if perfect deliver back the exe or if it has errors then display the errors. How do I go about the compiling part.
I want to be able to determine if the web.config element <compilation defaultLanguage="vb" debug="false" /> if the property is debug is set to true or false. Public Shared Function isDebug() as Boolean
to get out of this hell i used to remove inherit attribute in Page Directive.After that it is showing compliation error???How to solve it ???? what i have to do for the page compilation problem and page parser error tooo?????And 1 more thing is i had written the code of a button1 click event k after after i had opened that project if i double click on that button i am going to inline coding.. How to solve it..Even though i took 1 button in that button events i doube clicked on a event still there is no use...I am redirecting to inline coding.
I wrote an ASP.NET application and am running it on apache with mod mono. I get this error when trying to run it. It runs fine in Visual Studio and Mono Develop
Compilation Error
Description: Error compiling a resource required to service this request. Review your source file and modify it to fix this error.
I have an execute insert mmethod in my code behind page to trigger an insert on a database, which the button click event for the insertion calls. However I get this error when clicking on the "submit" button when I run the application:
Index was outside the bounds of the array.Here's my code for this code behind page. The line of code highlighted in bold is where this error message points to.
Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
I have compiled my pages and have uploaded it to my FTP...Now all other pages that arent compiled wont work as it says u need to compile dem aswell.....I dont want to compile these other pages wht shll i do
I am having a page which is working fine on my local machine.I am able to publish the project but when i deploy the page i am getting error.I am not understanding what is the problem.Why i am getting this error.
I've double checked the if class name & code file in aspx and aspx.cs files match(and they do). Removing the OnClick part of the button declaration in aspx file (or changing it to ie. OnClick="Page_Load").What might be the reason for this? Do I have to register my functions somewhere?