Use MailSettingssmtp With Both The ConfigSource And From Attributes?
Jan 15, 2010
I am trying to clean up our web.config file such that per-deployment specific stuff is not kept in the main config. I have managed with the connections strings and some of the mailSettings, but I need the from attribute as well as the configSource, but this doesn't seem to be allowed.
Currently I have this:
web.config:
<system.net>
<mailSettings >
<smtp configSource="email.config" from="me@blahblah.com" />
</mailSettings>
<defaultProxy>
<proxy bypassonlocal="True" usesystemdefault="False" />
</defaultProxy>
</system.net>
email.config
<network host="myhost" password="" userName="" />
Ideally I would have the set the configSource on either mailSettings or system.net, but this isn't supported.
Is there a better way to do this?
View 2 Replies
Similar Messages:
Oct 14, 2010
I have web app that compiles, but when I try to run it, it gives the following error:
"A section using 'configSource' may contain no other attributes or elements", I have made some research on this and still couldn't get anything.
Note: This is happening in the Web.Config file of the web app like this:
<system.web>
<pages
configSource="ConfigPages.config"
controlRenderingCompatibilityVersion="3.5"
clientIDMode="AutoID">
</pages>
View 1 Replies
Jun 24, 2010
I have splitted the appSettings from web.config file and put it under 'App_ConfigappSettings.config' which is mapped using configSource attribute.web.config :
[Code]....
It is working fine in my local machine. But giving problem while hosting the application to web server.i.e, Can not find appsettings
View 3 Replies
Aug 10, 2010
I am using the following XML structure
<SERVERS>
<SERVER NAME="A1" ID="1"></SERVER>
<SERVER NAME="A2"></SERVER>
<SERVER NAME="A3" ID="3" Parent="XYZ"></SERVER>
<SERVER NAME="A4" ID="4"></SERVER>
<SERVER NAME="A5" Parent="abc" value="10"></SERVER>
<SERVER NAME="A6"></SERVER>
</SERVERS>
I am accessing this xml file by using LINQ to XML in asp.net by using C#. I am able to access all the attributes of an XML node by explicitly specifying the name of the attribute. I want to write query on this xml file which reads all the attribute values of the xml node (In our example the node is SERVER) dynamically means I want to write the query which can read the read the value of the attribute Name & ID from first node, only name from second row, Name, ID & Parent from the third row , Name & ID from the fourth row, Name, Parent & Value from the fifth row & only Name from the sixth row without modifying the existing code every time. Once I add one of the attribute ( for example if I add the attribute ID in the sixth row ) in the above xml file then I dont need to modify my LINQ to XML query. My query should dynamically fetch the total number of attributes & display their values. Is their any way to do this ?
View 2 Replies
Mar 28, 2011
I 'm trying to connect to the database in file settings.web but displayed error.
What's wrong?
web.config:
[Code]....
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately. Parser Error Message: The
format of a configSource file must be an element containing the name of the
section.
View 1 Replies
Jan 4, 2010
Is there a way to use a generated file as a configSource for a web.config section?
In web.config, I tried a simple:
<webParts configSource="webpartsConfig.aspx" />
where webpartsConfig.aspx just spits out XML when accessed normally, but not as a configSource. (The literal source code is included as-is, giving an error.)
Motivation for this solution: I have different configuration variables locally and online, and I don't want to juggle multiple config files.
View 1 Replies
Nov 24, 2010
In my web.config I have:
<sessionState configSource="SessionState.config">
</sessionState>
In SessionState.config I have:
<sessionState timeout="90" mode="SQLServer" allowCustomSqlDatabase="true" cookieless="false" sqlConnectionString="Data Source=.;Persist Security Info=True;Integrated Security=True">
</sessionState>
I've tried various incantations but can't seem to get it to work. I get this error:
Parser Error Message: Unable to open configSource file 'SessionState.config'.
From MSDN:
Of course they don't show an actual example.
I verified that the file is in the bin directory. I also have this working fine for the connection strings section.
How do I use a remote config file for sessionState?
View 1 Replies
Dec 21, 2010
I have a create view that I cannot set HTML attributes on. I have tried various ways but still cant set an attribute. Currently I'm trying this
<%: Html.TextBoxFor(model => model.itinerary, new { size = 60})%>
View 10 Replies
Jun 30, 2011
I have a usercontrol that I load dynamically:
Code:
Sub PageLoadEvent()
Dim ctlIntrotext As Control = LoadControl("tryktabKapacitet.ascx")
plh1.Controls.Add(ctlIntrotext)
End Sub
and then adds the sub to the Page_load, that works fine.However:
1) How do I call subs from the usercontrol?
2) How do I add the OnClick-events which I normally have in the webform source, see example...
Code:
<uc9:TryktabKapacitet ID="TryktabKapacitet1" OnBtnNulstilClick="TryktabKapacitet1_BtnNulstilClick" OnSetAllModulesK="TryktabOptimering1_SetAllModules"
OnSetOneModuleK="TryktabOptimering1_SetOneModule"
OnBtnClick="TryktabOptimering1_BtnClick" runat="server"></uc9:TryktabKapacitet>
View 4 Replies
Dec 23, 2010
I have a web form with usual elements (first name, last name, etc). The Postback URL is a different website altogether as the form is intented to post lead information to another website.
The site that accepts the lead is expecting First Name to come over as "FName", and Last Name to come over as "LName". Is there any way I can set the ID of a textbox to "txtFName", but submit it over the wire as "FName"? I tried changing the name attribute, but at runtime it sets the name = id.
View 2 Replies
Mar 17, 2011
which is the efficient way to read the attribute values of xml node?
View 1 Replies
Feb 16, 2010
I want to add an attribute to the dataset declared below whose value is the value of one of the field in the row. So I want to add the id as shown below.
<root>
<Table id="GAS-405">
<apple>2009FA</apple>
<orange>3.00</orange>
<pear>BGPR</pear>
<banana>GAS-405</banana>
</Table>
</root>
This will me identify the node later in my application. Is this possible? Is this easier to do using XMLDocument?
Dim sdaFoo As SqlDataAdapter = New SqlDataAdapter("SELECT BLAH FROM BLAHBLAH", conn)
Dim dsFoo As DataSet = New DataSet()
dsFoo.DataSetName = "apple"
sdaFoo.Fill(dsFoo)
dsFoo.WriteXml("C:Inetpubwwwrootfoo.xml")
View 2 Replies
Jan 29, 2010
I have a class decorated with a attribute ...[DataEntity("MESSAGE_STAGING", EnableCaching = true, CacheTimeout = 43200)] for some requirement,I want to change this value "MESSAGE_STAGING" at run time to "Test_Message_Staging". What is the best possible way to achieve this? Can i use reflection ,Or is there any other way to do this.
View 3 Replies
May 26, 2010
How do I do this in a loop.
protected void ddlTool_SelectedIndexChanged(object sender, EventArgs e)
{
lblTool1.Visible = false;
txtTool1.Visible = false;
lblTool2.Visible = false;
txtTool2.Visible = false;
lblTool3.Visible = false;
txtTool3.Visible = false;
lblTool4.Visible = false;
txtTool4.Visible = false;
lblTool5.Visible = false;
if (ddlTool.SelectedValue == "1")
{
lblTool1.Visible = true;
txtTool1.Visible = true;
}
if (ddlTool.SelectedValue == "2")
{
lblTool1.Visible = true;
txtTool1.Visible = true;
lblTool2.Visible = true;
txtTool2.Visible = true;
}
if (ddlTool.SelectedValue == "3")
{
lblTool1.Visible = true;
txtTool1.Visible = true;
lblTool2.Visible = true;
txtTool2.Visible = true;
lblTool3.Visible = true;
txtTool3.Visible = true;
}
if (ddlTool.SelectedValue == "4")
{
lblTool1.Visible = true;
txtTool1.Visible = true;
lblTool2.Visible = true;
txtTool2.Visible = true;
lblTool3.Visible = true;
txtTool3.Visible = true;
lblTool4.Visible = true;
txtTool4.Visible = true;
}
View 5 Replies
Dec 26, 2010
is it possible to add a new entity with attributes and connect them and store details in the entity i am usign ms2010
View 1 Replies
Sep 10, 2010
I've added an ITemplate to Telerik's RadGrid control called SearchMenuTemplate ala:
[code]...
And the Template class looks something like (mandatory override methods like createchildcontrol have been omitted for brevity):
[ParseChildren(true)]
class searchBar : CompositeControl, INamingContainer
{
public string rbStartsWithText { get; set; }
}
Now, in the source control window the RadGrid control sees the Template. But rbStartsWithText isn't an attribute on the node.
I want to see something like this (note: abs prefix is registered in the markup):
<abs:AbsRadGrid ID="rg" runat="server">
<SearchMenuTemplate rbStartsWithText="Starts With" />
</abs:AbsRadGrid>
Instead rbStartsWithText is throwing a green squiggly and telling me it's not a valid attribute of SearchMenuTemplate.
View 1 Replies
Oct 22, 2010
i want to add items to a gridview in asp.net from a custom class. The class has Properties X and Y. Does anyone know if im able to add special attributes to these properties so i can just add the class and not have to muck around?eg..
[Column("Name")]
public string Name { get; set; }
Ideally i can then write something like..
this.gridview.datasource = instanceOfMyClass;
View 1 Replies
Mar 19, 2011
In mvc1, we can write an attribute as '[NewPath("mainpage", Controller = "BrowsePdts", Action = "Index")]' before Action for 'mappaththen we can do sth. as 'mappath' in webformI just want a navigate in the top of page , as ' book
>> magazine >> fashion 'but what the attribute change to in mvc3?
View 3 Replies
Dec 29, 2010
I've made a user control containing a panel, which is being loaded in a page, being toggled. in the js of that userControl i have a function in my document.ready that needs those attributes such as height, width, position, z-index. but those are all set to 0 cause the whole containing div is'nt yet toggled. what should i do to have those attributes before the toggling?
View 1 Replies
Nov 10, 2010
The code below works but confuses Visual Studio. Are there alternative/better ways to accomplish this?
<body <asp:contentplaceholder id="BodyAttribute" runat="server"/>>
View 3 Replies
May 4, 2010
.Net 4.0 is encoding values when using Attributes.Add. In previous versions it didn't. With the new behaviour it is no longer possible to write attributes containing single quotes.Here's an example.
<asp:TextBox ID="txtTest" runat="server" />
txtTest.Attributes.Add("onkeyup", "keyuphandler('hello')");
With the application pool framework version set to 2.0 it produces the desired result:
<input name="txtTest"
type="text" id="txtTest"
onkeyup="keyuphandler('hello')" />
With it set to 4.0 it produces an undesirable result:
<input name="txtTest"
type="text" id="txtTest"
onkeyup="keyuphandler('hello')" />
.Net 4.0 needs to be fixed to allow the developer to write attribute values containing single quotes.
View 9 Replies
Jan 5, 2011
I have the following element
<Bildfile typ="A" seq="1" width="320" height="214">How_Can_I_Get_This?</Bildfile>
and I want to get the Innertext of the element and the attributes.The attributes with the following code gives me the attributes, but how could I get the innerText of the element?I tried it with this
[XmlElement(ElementName = "Bildfile")]
public Bildfile Image { get; set; }
[Serializable]
[code]...
View 2 Replies
Feb 5, 2010
Say I have a class:
public class TestClass
{
public String Str1;
public String Str2;
private String Str3;
public String Str4 { get { return Str3; } }
public TestClass()
{
Str1 = Str2 = Str 3 = "Test String";
}
}
Is there a way (C# .NET 2) to iterate through the Class 'TestClass' and print out public variables and attributes?
Remeber .Net2
View 4 Replies
Jun 26, 2010
ddlFromCurrency.Attributes.Remove("class");
I want to remove class="xx" from html element with Attributes.Remove but not wokrking. Attributes.Add works but Attributes.Remove doesn't.
View 2 Replies
Oct 27, 2010
how do i set a CSS attribute programaticaly?
i guess it'0s in the controler?
what i need to do is set a diferent background image to diferent pages, what is the correct way to do it?
View 10 Replies
