C# - How To Dynamically Retrieve All The Possible Attributes (variable Attributes) Values Of One Of The Xml Node
Aug 10, 2010
I am using the following XML structure
<SERVERS>
<SERVER NAME="A1" ID="1"></SERVER>
<SERVER NAME="A2"></SERVER>
<SERVER NAME="A3" ID="3" Parent="XYZ"></SERVER>
<SERVER NAME="A4" ID="4"></SERVER>
<SERVER NAME="A5" Parent="abc" value="10"></SERVER>
<SERVER NAME="A6"></SERVER>
</SERVERS>
I am accessing this xml file by using LINQ to XML in asp.net by using C#. I am able to access all the attributes of an XML node by explicitly specifying the name of the attribute. I want to write query on this xml file which reads all the attribute values of the xml node (In our example the node is SERVER) dynamically means I want to write the query which can read the read the value of the attribute Name & ID from first node, only name from second row, Name, ID & Parent from the third row , Name & ID from the fourth row, Name, Parent & Value from the fifth row & only Name from the sixth row without modifying the existing code every time. Once I add one of the attribute ( for example if I add the attribute ID in the sixth row ) in the above xml file then I dont need to modify my LINQ to XML query. My query should dynamically fetch the total number of attributes & display their values. Is their any way to do this ?
View 2 Replies
Similar Messages:
Mar 17, 2011
which is the efficient way to read the attribute values of xml node?
View 1 Replies
Nov 24, 2010
I have been trying to add validation attributes dynamically at runtime and all works ok. I next tried to add a DisplayAttribute at runtime hooking into the same
[Code]....
View 10 Replies
Jan 29, 2010
I have a class decorated with a attribute ...[DataEntity("MESSAGE_STAGING", EnableCaching = true, CacheTimeout = 43200)] for some requirement,I want to change this value "MESSAGE_STAGING" at run time to "Test_Message_Staging". What is the best possible way to achieve this? Can i use reflection ,Or is there any other way to do this.
View 3 Replies
Sep 2, 2010
In my aspx page, I have a number of drop down controls. I would like to update an attribute on each of the controls with "class=leftColumn" with the following line: propertyID.Attributes["nameOfAttribute"] = "false";
But instead of manually writing out each controlID and setting its attribute with the line above, I had hoped there was a way to go through and set the attribute on each control ID if it had class=leftcolumn. This is something I know is very easy with JQuery, BUT I need to do it with the code behind (C#) I was told this is not possible (i.e. to acquire a list of all the controls and then iterate through the list and give it the attribute or any other way. That manually setting each control like the above example is the only way in ASP.NET.
View 2 Replies
Mar 18, 2010
Im trying to create a "user control menu" where links to a page's usercontrols are placed at the top of the page. This will allow me to put several usercontrols on a page and allow the user to jump to that section of the page without scrolling so much. In order to do this, I put each usercontrol in a folder (usercontrols) and gave each control a Description property (<%@ Control Language="C#" Description = "Vehicles" .... %>).
My question is how can I access this description dynamically? I want to use this description as the link in my menu. So far, I have a foreach on my page that looks in the ControlCollection for a control that is of the ASP.usercontrols type. If it is I would assume that I could access its attributes and grab that description property. How can I do this? (Im also open to a better way to achieve my "user control menu", but maybe thats another question.) Should I use ((System.Web.UI.UserControl)mydynamiccontrol).Attributes.Keys?
View 1 Replies
Mar 1, 2011
have some code which dynamically generates a number of drop down lists to provide the user with different options. The items in these drop downlists contain a value which is a unique id for that particular combination of options and a text component which just plain text but not neccessarily unique. I then have assigned a handler to these dropdownlists which is called on selected index changed to perform the relevant actions based on what options are selected. The problem is to make the system perform the correct action I need the unique ID from selectedValue of the drop down box but when it posts back it appears the selectedValue has been replaced to match the text of the item.
Dim dynDdl = New DropDownList()
dynDdl.ID = "ddlOpts" & i
dynDdl.AutoPostBack = True
AddHandler dynDdl.SelectedIndexChanged, AddressOf dynDdl_selectedIndexChanged
[code]...
View 1 Replies
Feb 5, 2010
I have a menu generated by my cms:
<ul>
<li><a href='default.aspx?pageid=2' id='link2'>rrr</a></li>
<div runat='server' id='menu2'>
<a href='default.aspx?subpageid=8'>rrr</a>
<a href='default.aspx?subpageid=9&siteid='>rrr</a>
<a href='default.aspx?subpageid=10&siteid='>rrr</a>
<a href='default.aspx?subpageid=11&siteid='>rrr</a>
</div>
<li><a href='default.aspx?pageid=3' id='link3'>Your Services</a></li>
<li><a href='default.aspx?pageid=4' id='link4'>rrrrrr</a></li>
<div runat='server' id='menu4'><a href='default.aspx?subpageid=1'>Single Equality Scheme</a>
<a href='default.aspx?subpageid=2&siteid='>Diversity Strands</a>
<a href='default.aspx?subpageid=3&siteid='>Equality Impact Assessments</a>
<a href='default.aspx?subpageid=4&siteid='>Quality and Safety Committee</a>
</div>
<li><a href='default.aspx?pageid=9' id='link9'>Contact Us</a></li>
</ul>
I would like to change the link that has been clicked, to class="active". I would like to add a class to the div if the page above is clicked too.
If (Len(Request.QueryString("pageid")) <> 0 and Request.QueryString("pageid") = 4) Then
menu & Request.QueryString("pageid") & .Attributes.Add("class", "active")
link & Request.QueryString("pageid") & .Attributes.Add("class", "activelink")
end if
View 3 Replies
Dec 21, 2010
I have a create view that I cannot set HTML attributes on. I have tried various ways but still cant set an attribute. Currently I'm trying this
<%: Html.TextBoxFor(model => model.itinerary, new { size = 60})%>
View 10 Replies
Jun 30, 2011
I have a usercontrol that I load dynamically:
Code:
Sub PageLoadEvent()
Dim ctlIntrotext As Control = LoadControl("tryktabKapacitet.ascx")
plh1.Controls.Add(ctlIntrotext)
End Sub
and then adds the sub to the Page_load, that works fine.However:
1) How do I call subs from the usercontrol?
2) How do I add the OnClick-events which I normally have in the webform source, see example...
Code:
<uc9:TryktabKapacitet ID="TryktabKapacitet1" OnBtnNulstilClick="TryktabKapacitet1_BtnNulstilClick" OnSetAllModulesK="TryktabOptimering1_SetAllModules"
OnSetOneModuleK="TryktabOptimering1_SetOneModule"
OnBtnClick="TryktabOptimering1_BtnClick" runat="server"></uc9:TryktabKapacitet>
View 4 Replies
Dec 23, 2010
I have a web form with usual elements (first name, last name, etc). The Postback URL is a different website altogether as the form is intented to post lead information to another website.
The site that accepts the lead is expecting First Name to come over as "FName", and Last Name to come over as "LName". Is there any way I can set the ID of a textbox to "txtFName", but submit it over the wire as "FName"? I tried changing the name attribute, but at runtime it sets the name = id.
View 2 Replies
Feb 16, 2010
I want to add an attribute to the dataset declared below whose value is the value of one of the field in the row. So I want to add the id as shown below.
<root>
<Table id="GAS-405">
<apple>2009FA</apple>
<orange>3.00</orange>
<pear>BGPR</pear>
<banana>GAS-405</banana>
</Table>
</root>
This will me identify the node later in my application. Is this possible? Is this easier to do using XMLDocument?
Dim sdaFoo As SqlDataAdapter = New SqlDataAdapter("SELECT BLAH FROM BLAHBLAH", conn)
Dim dsFoo As DataSet = New DataSet()
dsFoo.DataSetName = "apple"
sdaFoo.Fill(dsFoo)
dsFoo.WriteXml("C:Inetpubwwwrootfoo.xml")
View 2 Replies
May 26, 2010
How do I do this in a loop.
protected void ddlTool_SelectedIndexChanged(object sender, EventArgs e)
{
lblTool1.Visible = false;
txtTool1.Visible = false;
lblTool2.Visible = false;
txtTool2.Visible = false;
lblTool3.Visible = false;
txtTool3.Visible = false;
lblTool4.Visible = false;
txtTool4.Visible = false;
lblTool5.Visible = false;
if (ddlTool.SelectedValue == "1")
{
lblTool1.Visible = true;
txtTool1.Visible = true;
}
if (ddlTool.SelectedValue == "2")
{
lblTool1.Visible = true;
txtTool1.Visible = true;
lblTool2.Visible = true;
txtTool2.Visible = true;
}
if (ddlTool.SelectedValue == "3")
{
lblTool1.Visible = true;
txtTool1.Visible = true;
lblTool2.Visible = true;
txtTool2.Visible = true;
lblTool3.Visible = true;
txtTool3.Visible = true;
}
if (ddlTool.SelectedValue == "4")
{
lblTool1.Visible = true;
txtTool1.Visible = true;
lblTool2.Visible = true;
txtTool2.Visible = true;
lblTool3.Visible = true;
txtTool3.Visible = true;
lblTool4.Visible = true;
txtTool4.Visible = true;
}
View 5 Replies
Dec 26, 2010
is it possible to add a new entity with attributes and connect them and store details in the entity i am usign ms2010
View 1 Replies
Sep 10, 2010
I've added an ITemplate to Telerik's RadGrid control called SearchMenuTemplate ala:
[code]...
And the Template class looks something like (mandatory override methods like createchildcontrol have been omitted for brevity):
[ParseChildren(true)]
class searchBar : CompositeControl, INamingContainer
{
public string rbStartsWithText { get; set; }
}
Now, in the source control window the RadGrid control sees the Template. But rbStartsWithText isn't an attribute on the node.
I want to see something like this (note: abs prefix is registered in the markup):
<abs:AbsRadGrid ID="rg" runat="server">
<SearchMenuTemplate rbStartsWithText="Starts With" />
</abs:AbsRadGrid>
Instead rbStartsWithText is throwing a green squiggly and telling me it's not a valid attribute of SearchMenuTemplate.
View 1 Replies
Oct 22, 2010
i want to add items to a gridview in asp.net from a custom class. The class has Properties X and Y. Does anyone know if im able to add special attributes to these properties so i can just add the class and not have to muck around?eg..
[Column("Name")]
public string Name { get; set; }
Ideally i can then write something like..
this.gridview.datasource = instanceOfMyClass;
View 1 Replies
Mar 19, 2011
In mvc1, we can write an attribute as '[NewPath("mainpage", Controller = "BrowsePdts", Action = "Index")]' before Action for 'mappaththen we can do sth. as 'mappath' in webformI just want a navigate in the top of page , as ' book
>> magazine >> fashion 'but what the attribute change to in mvc3?
View 3 Replies
Dec 29, 2010
I've made a user control containing a panel, which is being loaded in a page, being toggled. in the js of that userControl i have a function in my document.ready that needs those attributes such as height, width, position, z-index. but those are all set to 0 cause the whole containing div is'nt yet toggled. what should i do to have those attributes before the toggling?
View 1 Replies
Nov 10, 2010
The code below works but confuses Visual Studio. Are there alternative/better ways to accomplish this?
<body <asp:contentplaceholder id="BodyAttribute" runat="server"/>>
View 3 Replies
May 4, 2010
.Net 4.0 is encoding values when using Attributes.Add. In previous versions it didn't. With the new behaviour it is no longer possible to write attributes containing single quotes.Here's an example.
<asp:TextBox ID="txtTest" runat="server" />
txtTest.Attributes.Add("onkeyup", "keyuphandler('hello')");
With the application pool framework version set to 2.0 it produces the desired result:
<input name="txtTest"
type="text" id="txtTest"
onkeyup="keyuphandler('hello')" />
With it set to 4.0 it produces an undesirable result:
<input name="txtTest"
type="text" id="txtTest"
onkeyup="keyuphandler('hello')" />
.Net 4.0 needs to be fixed to allow the developer to write attribute values containing single quotes.
View 9 Replies
Jan 5, 2011
I have the following element
<Bildfile typ="A" seq="1" width="320" height="214">How_Can_I_Get_This?</Bildfile>
and I want to get the Innertext of the element and the attributes.The attributes with the following code gives me the attributes, but how could I get the innerText of the element?I tried it with this
[XmlElement(ElementName = "Bildfile")]
public Bildfile Image { get; set; }
[Serializable]
[code]...
View 2 Replies
Feb 5, 2010
Say I have a class:
public class TestClass
{
public String Str1;
public String Str2;
private String Str3;
public String Str4 { get { return Str3; } }
public TestClass()
{
Str1 = Str2 = Str 3 = "Test String";
}
}
Is there a way (C# .NET 2) to iterate through the Class 'TestClass' and print out public variables and attributes?
Remeber .Net2
View 4 Replies
Jan 15, 2010
I am trying to clean up our web.config file such that per-deployment specific stuff is not kept in the main config. I have managed with the connections strings and some of the mailSettings, but I need the from attribute as well as the configSource, but this doesn't seem to be allowed.
Currently I have this:
web.config:
<system.net>
<mailSettings >
<smtp configSource="email.config" from="me@blahblah.com" />
</mailSettings>
<defaultProxy>
<proxy bypassonlocal="True" usesystemdefault="False" />
</defaultProxy>
</system.net>
email.config
<network host="myhost" password="" userName="" />
Ideally I would have the set the configSource on either mailSettings or system.net, but this isn't supported.
Is there a better way to do this?
View 2 Replies
Jun 26, 2010
ddlFromCurrency.Attributes.Remove("class");
I want to remove class="xx" from html element with Attributes.Remove but not wokrking. Attributes.Add works but Attributes.Remove doesn't.
View 2 Replies
Oct 27, 2010
how do i set a CSS attribute programaticaly?
i guess it'0s in the controler?
what i need to do is set a diferent background image to diferent pages, what is the correct way to do it?
View 10 Replies
