Visual Studio 2010 - Site Upgraded VS08 - VS10, And Now Compile-time Errors Do Not Show Until I Request The Page At Run-time?
Mar 11, 2011
I have an ASP.NET website that worked fine using and debugging in VS2008. I went through the upgrade process opening the solution in VS2010. I can run the site, but as I make changes in the app_code folder classes, they don't seem to commpile and warn me of compile-time errors. As soon as I get to a point that calls the class, the errors show up. Sounds JIT I guess, but this isn't how it was working in 08. Is there an option that was changed in the upgrade process? This is a large project, I really don't want to break something and not find out until some obscure page is opened.
View 1 Replies
Similar Messages:
May 7, 2010
For the first time in my career, I'm working on an ASP.Net (v3.5) project that has been set up as a Visual Studio 2008/10 Web Site Project.
I'm not keen on this way of working this way for various reasons but for the moment and until such time as the company sees the virtue in working in an environment with namespaces, designer and project files etc., I have to continue with the existing codebase.
I've run into some odd issues since I began this but perhaps the oddest one of all is that althought VS lets me build the code, it doesn't reliably pick up compilation errors so these are not noticed until runtime.
I know the website model allows dynamic/hot compilation when a request is made for a specific but I can't see why it wouldn't do this when I manually (F5) build/rebuild the project. Its immensely annoying as you can imagine and I can't find a workaround.
View 3 Replies
May 15, 2010
I am using Visual Studio 2010 Ultimate. The problem that am Facing is when I drag a component such as the "AsyncFileUpload" control upon the designer what i get instead of a textbox, as I used to get in VS08 is this chunk of code. I dont see the control working nor the bin folder which was a part of the VS08 Solution Explorer when you use Ajax.
[code]....
I really don't understand what to do with this code. This toolkit was by default present with the VS10 Ultimate Package. The code gets fully compiled but the screen is full of such codes. I am in a middle of completing an application and am stuck due to this .
View 2 Replies
Jul 28, 2010
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
View 1 Replies
Mar 11, 2011
I am using TFS to build my MVC app. I cannot do it because I get lots of compile errors. I am using version 4 of .Net and MVC 2. On the build server I have the .Net framework 4.0 installed. It has been suggested that I should also download the MVC framework as well, but when I look on the net all I can find is this MVC framework; http://mvcframework.codeplex.com/ which does not seem to be relevant and does not work anyway.
One of the assemblies I am missing on the build server is System.Web.Mvc dll.Typical error messages include; "The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)"What do I need to do to fix this?
View 2 Replies
Nov 9, 2010
I have an asp.net mvc 1.0 project. I upgraded the project and solution to Visual Studio 2010. However, I do not want to use asp.net mvc 2.0. My app compiles under mvc 1.0. All my references are to 1.0. I have copy local true and i am referencing mvc 1.0 from a lib folder, not the GAC.However I keep getting this error:
No parameterless constructor defined for this object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.MissingMethodException: No parameterless constructor defined for this object.
Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:[MissingMethodException: No parameterless constructor defined for this object.]
System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck) +0
[code]....
Its like it wants to keep using asp.net mvc 2.0, because its complaining about that GetControllerInstance method. This project works fine in vs 2008.
View 2 Replies
Mar 20, 2010
I have a ftp directory, which is not an asp.net applications, it's regular asp, and I'm just trying to use 2010 express to modify those files. (the ftp server uses active mode ftp if that makes a difference) I can connect, open the files, and edit them. Below the X is the file name of the file I'm editing.
After I save them once it starts to say "confirm save to web server" A more recent version of the file X has been saved to the web(the time I saved), do you want to replace the server files with your local file? I hit yes then get an error box. Cannot save the file X to the web server. The file X has been modified by (unknown) on date -400
View 1 Replies
Jan 12, 2011
As that title says my aspx page shows a compile error on the @Page directive that says "ASP.NET runtime error: Cannot load file or Assembly 'Microsoft.SqlServer.BatchParser' or one of it's dependencies". The project compiles with our error and it runs with no problem. The only real problem that this causes it that the intellisense for anything other than simple HTML is broken so I can't type asp:Controlname and have intellisense show me a the list of items or properties in a control. I get a green squiggly line under all the asp tags saying "Unrecognized tag prefix or device filter 'asp'". This project doesn't directly use SQL SMO but it does reference a project that does. However, I removed that reference and the problem still doesn't go away. I have installed on my development machine the full SQL client and for both SQL 2005 and 2008 (including the SDK) from the Developer editions of both versions. This was not a problem on VS2005 and the project compiles without error in VS2010 too.
View 1 Replies
Oct 13, 2010
At work I'm tryhing to upgrade an ASP.NET 2.0 app (which we wrote using VB.NET 2005) to ASP.NET 4.0. I had a few problems during the upgrade, but eventually worked them all out. At the end of the day I decided to give it a quick compile and see if I'd get the start page, so I hit F5 in VS 2010. I left it that way, and man was it acting weird. VS 2010 wasn't responding to anything. If I hovered the mouse over VS 2010's minimize or close buttons, in the upper right corner, then those buttons were flashing very rapidly. I'm not sure what was going on. After waiting 15 minutes to see if it would come up, I decided to try clicking on the close button. Nothing happened. Eventually, I had to leave (I take public transit, and I have to leave when the bus comes)But what I want to know is this, is this pretty standard behavior? Does it normally take this long to do this? This website is of modest size (<100 pages).
(Later) When I came into work today, 8 hours later, VS 2010 was still doing whatever the heck it was doing, but basically it wasn't responding to anything.
View 1 Replies
Apr 14, 2010
How can I make Visual Studio to use the 64bit compiler (csc.exe/vbc.exe) for an Asp.Net web site?
View 1 Replies
Aug 14, 2010
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
View 2 Replies
May 10, 2010
some time sthe design pages takes longer time to open sometimes its proper the code page open immediately but the design page tekes longer time to open but its not always how do i solve
View 3 Replies
Feb 24, 2011
We recently migrated to v4 of .net. We are running iis 7 in integrated mode. When the site first starts its slow. I get that - it compiles for the first time. The odd thing is then we will go to certain pages and it seems to compile again. The next time i go that page its very fast. Nothing exceptional with the second page - but once that is hit the rest of the site is fast.
View 1 Replies
May 27, 2010
I downloaded a trial version of Visual Studio 2010, created a new c# Solution and then wanted to add an ASP.NET Web Site. I am Folllowing an example in a book: ASP.NET 3.5 Enterprise Application Development with Visual Studio 2008.In the book they write that a template for createing an c# ASP.NET Web Site would be found, but whereever I search for o template in VisualStudio I cant find that for c#, I could find it for VisualBasic but that is not wath I want!
View 1 Replies
Jun 25, 2010
I recently upgraded from VWD 2008 Express to VWD 2010 Express. A problem has developed in that the website's graphics no longer appear in Design mode, there are "Error Creating Control" error messages that did not exist before, and also debugging errors that did not exist before. (Note: these problems did not exist when I first used VWD 2010; they may have originated with recent automatic Windows updates (I use Vista Home Premium SP2 with IIS 7)). The problem exists if I open the website either as a project file or as a website directory.
View 1 Replies
Dec 19, 2010
I am struggling to publish a site built (and working locally) using VWD 2010 Express to a production server.I realise that this is because I don't understand enough about the relationship between the website and SQL server and I certainly don't know enough about the way SQL server works in general. Can anybody recommend some learning resources - books, tutorials, vids etc, that explain the background and in particular address the issue of how to publish to a production server.
View 2 Replies
Dec 28, 2010
I have published my website using VS2010 and then selected FTP Site.Problem is that it does not show me update status. and takes too much time as compare to other FTP client. Is there any way or plugin for visual studio 2010 so i can build and directly publish that on FTP server.
View 2 Replies
May 26, 2010
My problem is that I have a grid view that show the data from database.In my gridview i add a column name date .like eg You knw that when we send a scrap to anyone then show time how much time to send a scrap.
View 6 Replies
Apr 6, 2010
I have a client request that all times be displayed in Pacific Time Zone, regardless of client settings. I'd like to avoid a scenario where I have to call a function for every time display and instead have a single point where I can make the switch.
I'm thinking a custom culture might do the trick, but I wanted to ask before I set off down a potentially blind alley (or miss something trivially easy).
View 3 Replies
Mar 19, 2011
I've tried all kinds of searches on this site and with Bing and don't seem to get any hits that meet my condition. So pardon me if this is a rather basic question. I'm rather new at ASP.NET programming.I want to experiment with putting up to a live site. GoDaddy gives you free hosting if you get the URL from them. The catch is the hosting only supports IIS 7.0 with .Net 2.0/3.0/3.5. I've uploaded all kinds of plain websites with no problem. So in Visual
Studio 2010 I selected the following options while creating a new project:
<customErrors mode="Off" />
<!--<compilation debug="true" targetFramework="4.0">-->
<compilation debug="true" >
<assemblies>
<add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</assemblies>
</compilation>
I tried various solutions offered on the web for other issues like setting References "Copy Local = true" to upload various binaries.
View 4 Replies
Dec 13, 2010
I am facing a problem reated to web services. A customer is running his website on an old server running .Net Framework version 1.1. We would like from this site to call a Web Service, how can I do that. I have Visual Studio 2010 intalled on my machine and when I use the option "Add Web Reference" the generated files/folders seem to not be compatible.
View 1 Replies
May 19, 2010
I tried copying the .aspx and .aspx.vb files from my existing VS 2008 web site directory into the VS 2010 project directory (which is how I converted projects from VS2005 to VS2008), but that doesn't seem to make the files appear in the project/solution in VS 2010.So, I've got this site I built in VS2008, and I want to start editing it in VS2010. What's the best way to do this?
View 1 Replies
Jan 28, 2010
When I put 2010beta on my computer, made a new project and ftp'd to my site and it was downloaded, then I (stupidly) selected the option in a popup to update my site to the new ASP, what changes were made? How can I change/undo this to make my site work again?
I had the site built and i maintain, know very little coding...
View 2 Replies
Jun 3, 2010
1. What is the best site to host an ASP.NET Web Application which contains a login page, members area, and specified user accounts?
2. How do I connect my created web site to a hosting site such as GoDaddy.com or other?
View 4 Replies
Jun 16, 2010
I am using visual web developer 2010 and have a situation where if I make edits to either the master or default page text's, they are not refelcted in what is displayed when the site is run?
View 1 Replies
