Webforms - Iterate Through All Tetxbox Controls In A Webpage
Feb 23, 2011
i have 6 textboxes which i want to iterate.
they are however in a TD in a TR in a TABLE in a PANEL etc.
the only way i've figured out to iterate them is in this way:
this.Controls[0].Controls[3].Controls[7].Controls
that's not only errorprone, but also hard to come up with.
but this.FindControl (to find one by name) doesn't work either, does findcontrol also only search in the direct child, and not the whole hierarchie?
so basicly what i'm looking for is to iterate ALL controls in the page, no matter in which level of the hierarchie, to check if it's a textbox.
View 1 Replies
Similar Messages:
Mar 24, 2010
Webpage error details
View 3 Replies
Sep 8, 2010
in TablaVenta (<asp:table>) dynamically generated new rows containing two columns, one with a display name and the other a textbox for the user to enter a value.When I want to retrieve those rows from the code, I notice that there are no rows created in the table
[Code]....
Error: Specified argument was out of the range of valid values.
Parameter name: index
View 4 Replies
Jan 3, 2010
Have an objectdatasource that I need to iterate through and tally up values in certain catagories how would I do this.In short I need to grab each row check specific fields then increment counters I startted off below trying to use IEnumerable.is this the correct start?
View 4 Replies
Jul 9, 2010
I am having a problem. I need to check to see if a row has been displayed once, and if so don't display it again. I have the following code:
[Code]....
This all works perfectly, but displays the body row repeatedly. So i need to add a counter or something to check this and make sure it is only displayed once..
I tried with DISTINCT in the sql but that didn't work, so i think it may be better doing it through iteration? Can this be done?
View 11 Replies
Apr 21, 2010
I've got a datatable in a dataset which contains 44 rows. I can iterate through the rows and add the data to a placeholder - it's all there. However, if I bind a control (say a gridview or dropdownlist) to the datatable, all I get is one record (from the "middle" of the table). I get the same result when I create a dataview of the table - one row.
View 4 Replies
Mar 31, 2011
I wrote(attempted) a sub to disable all linkbuttons in a column in my GV. It seems code #1 just disables the LB in 1 row only.
[Code]....
View 3 Replies
Jan 18, 2010
how to iterate through all the controls in just my Content place holder ? What I'm looking to do is to Enable/Disable all the controls in my Content place holder (WEbControls as well as HTML Controls).
View 2 Replies
May 4, 2010
I am using listview which looks like below:
col1 col2 col3
ow1 textbox1 textbox2 textbox3
dropdown1 dropdown2 dropdown3
row2 textbox1 texbox2 textbox3
dropdown1 dropdown2 dropdown3
i.e. I have two rows and three columns in each column I have 1 textbox and 1 dropdownlist.
What I want is this, When a user selects something from dropdownlist , in selectedindexchanged event, I need to check if selected value from the sender dropdownlist is equal to any of the textboxes of the listview.
i.e. in selectedindexchange event of dropdownlist , I need to find all the textboxes of listview and then iterate them to match with selectedvalue.
Previously, I have done this for 1 row only by using namingcontainer but how to find all textboxes of listview .
View 8 Replies
Oct 4, 2010
I am a total novice to VB so bear with me.In my web-based project, I pass an ID field as a parameter in my URL and go through each row in my gridview to find the correct row that matches the ID parameter, like so:
[Code]....
[Code]....
The problem is that this code only works if the corresponding ID is in a row displayed on the first page. I want to loop through each page in the gridview's rows until either the correct ID is found or it reaches the end of the data set. How do I do this? I assume I need another For loop that looks something like...
[Code]....
...that will go right before my other for loop, and one will loop through each page in the gridview. But obviously I've got that For Loop completely wrong. How do I do this correctly?
View 3 Replies
Feb 26, 2010
I have a textbox which i am setting it's .Text value with a column's value of the respective record. Then the user should be able to edit that text and then click save. In the save button's on click function when I try retrieving that textbox's .Text it ends up being what I originally put in there not the new string that was entered in.
View 3 Replies
Feb 24, 2010
I have sqldatabase tables.I am reading table data and putting in a tabconatiner(wth tabs containing textbox, checkbox etc) specific to a client. If a client has more than one row i want to iterate through the rows and read each row data. Basically I want to use a button-click to read the next row data at put it in the tabs and so on. I used sqldatareader and a while loop.I can read the data but while loop iterates through the rows and show the last row data / i want to use a button to go to the next row and show data.
SqlDatareader reader=null;
reader=cmd.ExecuteReader();
while(reader.Read())
{
txtboxName.Text=reader["Name"].ToString();
}
protected button_Click(Object sender,EventsArgs e)
{
//I want to read row data in this button click
}
View 8 Replies
Dec 1, 2010
I'm able to iterate each text box control in "MainContents" by using the code below.
Q1: Is there a shorter way? (to get all controls in "MainContents"?)
For Each ctrl As Control In Page.Controls
For Each subctrl As Control In ctrl.Controls
For Each subctrlsub As Control In subctrl.Controls
If TypeOf subctrlsub Is
[Code].....
View 1 Replies
Sep 2, 2010
I am wondering if MVC offers a handy function to iterate through all areas. I know I can search the sub-directories of Areas to achieve this. I am just curious.
View 3 Replies
Jun 21, 2010
Is it possible to iterate through an unordered list like the following in codebehind?
[Code]....
I was hoping to iterate through all the li elements of the ul checking whether NavigateUrl is equal to the current url. If it is, I was going to add a CssClass to give it a different appearance.
I think I know how to compare it to the page's url and to how to add the css class. I'm just not quite sure how you iterate through li items using a HTML Generic control.
View 5 Replies
Apr 5, 2010
I have a section of a form that I need to handle differently from the rest of form results. In the section that needs special handling I need to iterate over 3 form fields that have the same name. They have to have the same name, I can't change it. The section of the form I am referring to looks something like this:
<td><input name="Color" size="20" value="" type="text"></td>
<td><input name="Color" size="20" value="" type="text"></td>
<td><input name="Color" size="20" value="" type="text"></td>
Using C# I try something like this:
I try to handle it like this:
int i;
for (i = 1; i <= Request.Form["Color"][i]; i++)
{
colorName.Text += Request.Form["Color"];
}
Which leads to the following exception:
System.NullReferenceException: Object reference not set to an instance of an object.
How should I be handling form fields with the same name?
View 4 Replies
Feb 5, 2010
Say I have a class:
public class TestClass
{
public String Str1;
public String Str2;
private String Str3;
public String Str4 { get { return Str3; } }
public TestClass()
{
Str1 = Str2 = Str 3 = "Test String";
}
}
Is there a way (C# .NET 2) to iterate through the Class 'TestClass' and print out public variables and attributes?
Remeber .Net2
View 4 Replies
Oct 13, 2010
I have List (Of Report). Report has 90 properties. I dont want write them each and every propertiy to get values for properties. Is there any waht to get propeties values from the List
Ex:
Dim mReports as new List(Of Reports)
mReport = GetReports()
For each mReport as Report In mReports 'Here I want get all properties values without writing property names next
View 4 Replies
Jun 1, 2010
Does anyone know how I can iterate through textboxes on a usercontrol and put the values into a list. This is what I have tried so far...
[Code]....
[Code]....
View 2 Replies
Jan 6, 2010
I have an html table in an aspx page (C#) that has columns like
1.CheckBox 2.Text 3.Text 4.TextBox
I want to iterate through the table one row at a time and process (run a stored procedure based on column2) based on whether the checkbox is checked or not. How will I be able to do that?
View 4 Replies
Apr 5, 2010
I have a Telerik RadGrid with a GridTemplateColumn that contains a checkbox, as follows:
<telerik:GridTemplateColumn HeaderText="MINE" UniqueName="MyTemplateColumn">
<ItemTemplate>
<asp:CheckBox id="MyCheckBox" runat="server"></asp:CheckBox>
</ItemTemplate>
</telerik:GridTemplateColumn>
I want to set the box to be "checked" based on a value read from the database. I could handle the ItemDataBound event and read the database when each row is bound, but that results in n lookups. Instead, I want to handle DataBound, and then set all the values at once. So, in that method, I want code like this:
[code]....
View 2 Replies
Sep 20, 2010
I have an asp website, and a dataset with a datatable. When I check I after configuring it it shows all the data. But when I run the code I got an exception System.Data.ConstraintException was unhandled by user code Message="Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints." I want to figure it out with iterating datarow.
[Code]....
View 1 Replies
Mar 31, 2010
I have a multi section form which the user can jump between sections to complete. Each section has its own validation group associated with it. I want to create a summary page which itterates through each of the validation groups and outputs if it is valid or not by changing an associated text.The problem that I am having is that once one validation group fails validation all subsequent sections also report as failing - presumably as the page.isvalid is still holding the fact that a previous group has failed
View 1 Replies
Oct 26, 2010
I've created a wallboard application to display outstanding support calls for my ICT department. I've bound a number of gridviews to sqldatasources which execute a stored procedure. This is automated via asp.net ajax controls and partially refreshes the page/data every 30 seconds.
At the moment, when the number of records in the gridview goes over 9, the gridview automatically pages and shows the number of pages in the bottom right hand corner. The helpdesk can then VNC to the box which controls the screen and manually click to see what's on the next page.
What I am after is a way to programmatically (using the c# code-behind file) changing the current displayed page after 10/15 seconds or so, obviously if this is possible in the scope of the gridview. I trailed using javascript (and failed at jquery) of scrolling the gridview within a div, however this didn't work as expected.
Can anyone point me in the right example. I can't find anyone else querying this functionality via a quick Google.
Gridview Code:
<asp:GridView ID="GridView1" ShowHeader="False" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1"
GridLines="None" CellPadding="2" Font-Size="35pt" AllowPaging="True" PageSize="9">
<Columns>
<asp:BoundField DataField="ID" HeaderText="ID" SortExpression="ID">
<ItemStyle Width="15%" />
</asp:BoundField>
<asp:BoundField DataField="ASSIGNEES" HeaderText="ASSIGNEES" SortExpression="ASSIGNEES">
<ItemStyle Width="32%" Wrap="false"/>
</asp:BoundField>
<asp:BoundField DataField="title" HeaderText="title" SortExpression="title">
<ItemStyle Width="53%" Wrap="false"/>
</asp:BoundField>
</Columns>
</asp:GridView>
SqlDataSource Code:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:FPConnectionString %>" SelectCommand="HDMonitoringOutstandingToday" SelectCommandType="StoredProcedure"></asp:SqlDataSource>
Link to printscreen of wallboard (not allowed to post images, damn newbie) >>> http://cl.ly/b48b88d9e5f9b7fa43ab
View 2 Replies
Feb 10, 2011
I have a datalist and a hyperlink control that holds a url. A user creates this datalist through an admin website and not all of the hyperlinks have a link in them. The issue is how to hide the link that doesn't have a url in the database field.
code for the datalist:
<asp:DataList ID="dtlPromoEvents" runat="server" CellPadding="2" CellSpacing="2" RepeatColumns="1" RepeatDirection="Vertical" RepeatLayout="Table" >
<ItemTemplate>
<asp:Label ID="lblPromoHeading" runat="server" Text='<%# Eval("eventHeading") %>' Font-Size="12pt" ForeColor="#FFFF00" />
<br />
<br />
<asp:Label ID="promoDate" runat="server" Text='<%# Eval("eventDate", "{0:D}") %>' Font-Size="11pt" ForeColor="#33FF00" /> <span style="color: #33ff00; font-size: 12pt">@</span> <asp:Label ID="lblPromoTime" runat="server" Text='<%# Eval("startTime", "{0:t}") %>' Font-Size="11pt" ForeColor="#33FF00" />
<br />
<br />
<asp:Label ID="lblPromoDetails" runat="server" Text='<%# Eval("eventDetails") %>' Font-Size="11pt" />
<br />
<br />
<br />
<asp:HyperLink ID="eventLink" Text="Check this out!" CssClass="linkEvent" Visible="false" runat="server" Target="_blank" ToolTip="click to go check out what's happening!" NavigateUrl='<%# Eval("eventLink") %>' />
<br />
<br />
<br />
<hr style="width: 480px; height: 1px; background-color: #ff9900; border-color: #ff9900" />
<br />
</ItemTemplate>
</asp:DataList>
In the code behind I set the datasource with code and now I am stumped on how to reach into the items and control the visibility of the 'check this out' link based upon whether the db field has a link in it or not.
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
dtlPromoEvents.DataSource = LoadEvents();
//filter through the events and turn on visibility for the events that have a live link.
dtlPromoEvents.DataBind();
}
}
public static DataSet LoadEvents()
{
DataSet eventInfo = new DataSet();
string connectionString = ConfigurationManager.AppSettings["ConnectBeerGeeksDb"];
using (SqlConnection selectConnInfo = new SqlConnection(connectionString))
{
SqlDataAdapter adapterInfo = new SqlDataAdapter("SELECT [eventDate], [startTime], [eventHeading], [eventDetails], [eventLink] FROM [promoEvent] WHERE (eventDate + 1 > GETDATE()) ORDER BY eventDate", selectConnInfo);
selectConnInfo.Open();
eventInfo.Clear();
adapterInfo.Fill(eventInfo);
selectConnInfo.Close();
}
return eventInfo;
}
Adding the refined code that works on this url: [http://beergeekspub.com/events.aspx][1]
protected void dtlPromoEvents_ItemDataBound(object sender, DataListItemEventArgs e)
{
if (e.Item.ItemType == ListItemType.Item || e.Item.ItemType == ListItemType.AlternatingItem)
{
// Retrieve the Hyperlink control in the current DataListItem.
HyperLink eLink = (HyperLink)e.Item.FindControl("eventLink");
// Check if a URL exists, if not then hide the control
if (string.IsNullOrEmpty(eLink.NavigateUrl))
{
eLink.Visible =false;
}
}
}
also the page load databinds the datalist -
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
dtlPromoEvents.DataSource = LoadEvents();
dtlPromoEvents.DataBind();
}
}
View 1 Replies
