I have an html table in an aspx page (C#) that has columns like
1.CheckBox 2.Text 3.Text 4.TextBox
I want to iterate through the table one row at a time and process (run a stored procedure based on column2) based on whether the checkbox is checked or not. How will I be able to do that?
Suppose I have a temporary table (Shown below). The table is defined and populated in my stored procedure. After it is populated, I need to go through every row in the table. Here is what I need to do :
Check if Amount2 > Amount1 If Amount2 > Amount1 then set Amount1 = Amount2
It feels a little akward for me to use the temp table.
[code]....
I have a Telerik RadGrid with a GridTemplateColumn that contains a checkbox, as follows:
<telerik:GridTemplateColumn HeaderText="MINE" UniqueName="MyTemplateColumn">
<ItemTemplate>
<asp:CheckBox id="MyCheckBox" runat="server"></asp:CheckBox>
</ItemTemplate>
</telerik:GridTemplateColumn>
I want to set the box to be "checked" based on a value read from the database. I could handle the ItemDataBound event and read the database when each row is bound, but that results in n lookups. Instead, I want to handle DataBound, and then set all the values at once. So, in that method, I want code like this:
[code]....
I am trying to achieve the multiple attachments. In order to do this, I am trying to add a new row to a html table. It must have 2 columns
1) The File Name which is a hyperlink
2) a button (html button preferably) on click of which I want to delete that particular row.
I want to select many rows from my SQL Server database and combine them in a certain manner. Currently, I've been using the following method to get these rows:
[code]....
I am having a problem. I need to check to see if a row has been displayed once, and if so don't display it again. I have the following code:
[Code]....
This all works perfectly, but displays the body row repeatedly. So i need to add a counter or something to check this and make sure it is only displayed once..
I tried with DISTINCT in the sql but that didn't work, so i think it may be better doing it through iteration? Can this be done?
I've got a datatable in a dataset which contains 44 rows. I can iterate through the rows and add the data to a placeholder - it's all there. However, if I bind a control (say a gridview or dropdownlist) to the datatable, all I get is one record (from the "middle" of the table). I get the same result when I create a dataview of the table - one row.
View 4 RepliesHere I am binding a gridview. I dont know exactly how many rows it will exists. there may be from 1 to n rows possible there are 4 columns.
Now what I want , i.e. after gridciew binds records, suppose there are 4 rows are bounded to gridview, I want to send all rows data through mail, but in my html format there are fixed rows. I want to add rows according to throws which gridview having.
suppose gridview binds 3 rows the mail format should be like this
Date From Date To Place Days
12/12/2010 14/12/2010 Mumbai 2
12/12/2010 16/12/2010 Goa 4
12/12/2010 20/12/2010 Pune 8
1. first tell me how to get this data from gridview in variables so that i can put them in my mail format
2. this condition if grid bind only three records cos I have fiexd rows in my html format.. but if grid is haing 5 records then how will I add rows to table in my mail html format
Actually what i am doing in my Data Access Layer dragging store procedure to TestDbml to display records and creating data context instance in BAL to retrieve records and my method in BAL is like this
public IEnumerable display()
{
using (TestDataContext db = new TestDataContext())
{
var display = obj.USP_Actor_View_Speciality(p_UserName, 1);
return display as IEnumerable;
}
Now the problem is that how can i iterate or fetch over the records and display accordingly in my Presentation Layer so that i could return all the field parameteres Like ield1=val.field1,field2=val.field2.
I have a Gridview and I try to Iterate through the NewValues collection and HTML encode all.
I am following MSDN CODE.... using their code (posted here) I receive an error:
Collection was modified; enumeration operation may not execute.
I would like ask you a Full simple example how to implement it, so beginners like me can start use this function.
PS: I posted a similar questions here and people replied but I still do not understand it and i Would need a simple example.
[code]....
I have programatically added javascript to HyperLink controls on all pages in my site from the Masterpage as it is served up.
I have a new problem. I have a Masterpage wrapper around html pages without asp.net controls in them. Using the Masterpage, I need to parse through all html hrefs in each page and add javascript to each link if it includes "http" or ".pdf". Can the Masterpage parse the text of each page and programatically change it?
i have a table that has some columns and rows i want this table to have borders that are visible inside it i want every column an row to be closed in borders how can i do that?
View 1 RepliesI have an asp:Table and around the mid point of the table there is a DDL with values 2-5. What I want to do is add the selected amount of rows using AJAX right after the table row that has the DDL in it. I know how to dynamicly crate the rows, the info in the rows, and how to use AJAX to make things. Problem is I can not put the ContentTemplate tag inbetween the asp:TableRow which would mark the location I want the dynamic rows to start being added. I did some searching on here but most posts I find start with making the table from code and not the asp:Table tag
View 2 RepliesI have one table named 'dbo.ac_Products' Within this table there is a column named 'ProductId' There is also another table named 'dbo.ac_CatalogNodes' Within this table there is a column named 'CatalogNodeId' and a column named 'CatalogNodeType'
I need to delete all the rows from 'dbo.ac_Products' and 'dbo.ac_CatalogNodes' where 'ProductId' = 'CatalogNodeId' and 'CatalogNodeType' = 1
how do create 10 cloumns and 10 rows in the table. The rows will came a1,a2....a10.
View 4 RepliesI am trying to generate a dynamic table andd add rows to a ASP.Net table control on my UI. My problem is as I add a new row from MyTable, in to another table the table I am copying from, will loose one row. Here is the code:
Table
myTable = new
Table
();
[Code]....
am just reading one row in every loop and add that row in to another table object, why is 'myTable' loosing loosing one row in each loop?
I am trying to delete or add rows in a table but since the table is in an update panel,upon deletion the row goes away and then comes back.I have tried using return false but it does not seem to work in IE or FF.
I am using the following code:
$(document).ready(function () {
$(.table).click (function ()}
(this).parent().remove();
[code]...
Basically I need a way to disable the postback.
I have table a and would like update table a whose values from table b, but not update all rows at table a. Only update record ID in table a match record ID in tableC.
Here is my query
update a
set a.Desc = b.Desc,
a.Value = b.Value
from TableA a, TableB b
where a.name = b.name
and a.ID = b.ID
and a.ID in ( select ID from TableC)
I only have 12 a.ID match TableC, but above query update whole TableA.
How to only update 12 record at TableA from TableB?
how can i use html to create table(<table></table>) in code behind c#?
View 18 RepliesI have two possible header rows for a DataTable that I build dynamically. Setting the value of a cell works fine. Adding the cell to a TableRow works fine. The problem comes in where I have to build a second possible header row that uses the same cell.
An example is below.
trHead1 = New TableRow
trHead2 = New TableRow
tcCalc = New TableCell
tcCalc.Text = "Rates"
trHead1.Cells.Add(tcCalc)
trHead2.Cells.Add(tcCalc)
As soon as I make the second row add the cell, the cell disappears from the first row. This really doesn't make sense to me but that seems to be the way it is. If there is a work around other than duplicating the lines;
tcCalc = New TableCell
tcCalc.Text = "Rates"
I 'm curious to know how I could hide rows in my <table> in logical cases where, for instance, I have a list of radio buttons and depending on whether the user selects "Yes", the row below it appears for them to fill in some information.
View 9 RepliesI'm currently stuck settings border in a html table. (I use inline stiles for a better rendering in e-mail-clients) I have this piece of code:
[code]....
That will be rendered as this:
I want the table to be rendered like Excel would render a table with inner and outer border.
[URL]above url contain a html table.I want to save this table value on XML and also want to save this table value on database MS2008.How to save html table values on database
View 3 RepliesI am doing a data warehouse project.I have two tables tblA (id, type) and tblB(city, no_crimes, type).I want to create (insert) a number of rows based on the value of no_crimes.For Example, in tblB(Leeds, 2000, murder). SO, I need to insert 2000 rows into tblA by a single INSERT statement (not 2000 statements).
View 3 RepliesI want to create a dynamic HTML table in C# and assign value.
View 4 Replies