Website Creation Wizard Did Not Complete Successfully?
Mar 11, 2011
I'm trying to setup my website to have a URL on the server using IIS.I click on Web Sites and go to new website and select the folder with my asp.net website but at the last step I get the error message in the subject line. ERROR:"the web site creation wizard did not complete successfully. Cannot create a file when that file already exists"The name of the site that I'm using does not already exist. Can anyone explain what I need to do to get this made?
I am wanting to use the User Creation Wizard and also be able to select the Role of that user. In this applicaiton. I will be creating or my backup person will be creating our users. We will only have a few users and I want to make it so I can create the user and select there role thru the application.Can I use the User Creation Wizard and add to it the ablity to select the roles perhaps show all my rolles as check boxes and just check the ones I need. Currently I only have 3 my CoOp, MACED, Admin most of these are going to be either CoOp or Maced there will be a couple that have both Admin and Maced roles.
I'm in the process of redesigning a creation wizard in our ASP.NET MVC 2 application.Our current method is to have different pages for each step and navigate between them. While this works, it's a bit slow and annoying to navigate.I was looking to use JQuery and AJAX to make this feel a bit more dynamic and to also use client side validation.I have investigated using Ajax.BeginForm() to post back the individual steps of the wizard, and have that post return the partial view containing the new form with the next step of the wizard. That way, I can do client-side validation on each step.With this in mind, is Ajax.BeginForm() a better method than using the JQuery form plugin? Has anyone found any major issues with either approach?
The above code is my register wizard code, user can register just fine.When the user finish registration, there is a "Continue" button on the complete step.Clicking it will do nothing, how do I redirect the user to specific URL when the user click it?
In the final step of the wizard control, I have got a method for the OnActivate event but for some reason everytime I click Submit on the second last step (steptype = Finish), it does all the adding to the database but does not seem to fire the OnActivate event as the Summary page does not load (the same page refreshes). Is there a way to check if the event is firing or better what the problem is. I have posted some part of the code below:
I want to make my own website for online logo creation. I have see many websites for this.But i do not know how can i make logo creator online. can you please help and give me guidence how can i create online logo creation website.
My understanding of Factory Method Pattern is (Correct me if i am wrong) Factory Method Pattern "Factory Method allow the client to delegates the product creation (Instance Creation) to the subclass". There are two situation in which we can go for creating Factory Method pattern.
(i) When the client is restricted to the product (Instance) creation.
(ii) There are multiple products available.But a decision to be made which product instance need to be returned. If you want to create Abstract Method pattern
You need to have abstract product Concrete Product Factory Method to return the appropriate product.
public enum ORMChoice { L2SQL, EFM, LS, Sonic } //Abstract Product public interface IProduct { void ProductTaken(); } //Concrete Product public class LinqtoSql : IProduct { public void ProductTaken() { Console.WriteLine("OR Mapping Taken:LinqtoSql"); } } //concrete product public class Subsonic : IProduct { public void ProductTaken() { Console.WriteLine("OR Mapping Taken:Subsonic"); } } //concrete product public class EntityFramework : IProduct { public void ProductTaken() { Console.WriteLine("OR Mapping Taken:EntityFramework"); } } //concrete product public class LightSpeed : IProduct { public void ProductTaken() { Console.WriteLine("OR Mapping Taken :LightSpeed"); } } public class Creator { //Factory Method public IProduct ReturnORTool(ORMChoice choice) { switch (choice) { case ORMChoice.EFM:return new EntityFramework(); break; case ORMChoice.L2SQL:return new LinqtoSql(); break; case ORMChoice.LS:return new LightSpeed(); break; case ORMChoice.Sonic:return new Subsonic(); break; default: return null; } } } **Client** Button_Click() { Creator c = new Creator(); IProduct p = c.ReturnORTool(ORMChoice.L2SQL); p.ProductTaken(); }
I have learnt most of the main skill points in ASP.NET model, eg how to use a GridView. I would like to find some complete website with source code to analyse/observe, but so far it seems on the internet most learning resources are dealing with a specific topic. Is it possible to find some?
I am trying to use wizard in an update panel but the wizard is disappearing when I click for the next or prev step button. I only want to close wizard , when I click the finish button. How can I do this ?
I have a page (i.e. page1.aspx) that a user will select from the record and it will press on the delete button. And it will redirect on another page (i.e. page2.aspx). On page2.aspx, I wrote my query for example
Code: DELETE FROM items WHERE item_id=2 how may I know if the query was successfully processed because I have to redirect again on the first page.
I have this basic code for form mail from 1&1 i would like to add a redirect url after the form has been successfully sent, So once you hit the send button and your forms is sent you are then taken to a new web page that is a thankyou page.I would like to know if this can be done with the server script? and where the response redirect should go? Do i need to add any code to my html page? Attached is the server script (below) and underneath a sample of the basic HTML. Any suggestions most welcome - thanks <% @LANGUAGE="VBSCRIPT" CODEPAGE="1252"%><html><head><title></title><meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"></head> <body> <% Set Mail = Server.CreateObject("SMTPsvg.Mailer") 'create an Asp mail component.Mail.FromName = "1&1 Test"Mail.FromAddress= Request.Form("email")Mail.RemoteHost = "mrelay.perfora.net" ' The mail server you have to use with Asp MailMail.AddRecipient "ABCDE Company", "hello@justonedomain.com"Mail.Subject = "Website - Info Request"Mail.BodyText = Request.Form("info")if Mail.SendMail then else Response.Write "Mail send failure. Error was " & Mail.Responseend if %> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html><head><title>ASP Mail Test page</title><meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"></head><body background=""><table width="100%" border="0" align="center"> <tr> <td width="54%" align="center" valign="top"> <form onSubmit="return ValidateForm()" method="post" action="forminfo.asp"> Email Address:: <input name="email" type="text" id="email" size="41"></p> Comments:: <textarea name="info" cols="35" rows="10">
My question is similar to http://stackoverflow.com/questions/194579/how-to-detect-when-a-user-has-successfully-finished-downloading-a-file-in-php but I have to do the same using IIS, ASP.NET and C#.
None of the methods in the HttpResponse class provide feedback if the data was sent or not, TransmitFile just does its job (or not) and does not provide any means of knowing the result.I was thinking of using the .Filter property but then again, the filter is based on the HttpResponseStream which does also not provide any feedback.
Now, I'm trying to receive this data in a method so I can update stuff, like this:
[Code]....
But the above is not working. I've tried using [Bind(Prefix="user")] with no success. Before using this setup, I had all the user's properties directly in the ViewModel and the above method worked like charm.
What can I do to be able to process my POST request? I do not want to change my ViewData structure. I presume the answer to the question is not to difficult and lies only in adding something or changing some properties.
we have windows xp operating system, here we installed my website that will be stored in the location(c://programFiles/) if we run the sample after executing ouputfile(scan.pdf)image file will be stored in C://inetpubs/ftproot/(if file transfer type is FTP). if file transfer type is HTTP then the image file is transfered to the location:c://programFiles/website1/app-data. If we install the same website in windows 2007 64 bit os website will be stored at c://programfile x(86)/. if we run the sample through ftp it is running fine and file is stored at FTP folder. but if we run the same application through HTTP, file is not transferring to destination folder(c://programFiles x(86)/website1/app-data.)
I'm adding a reference to a funciones.dll file using
clr.AddReferenceToFileAndPath() because I couldnt get it to work other way with this file and it succesfully does it. The file is named funciones.dll and it's in the bin folder. But when I do
from funciones import *
I get "no module named funciones"
since the funciones.dll file it's a funciones.py file compiled, shouldnt the module name only be named funciones and no any other name? isnt the name the problem and it's another? I dont know what other info could be relevant here but if there is any let me know
has someone make ajax.actionlink for delete to work properly.After deleting the record successfully at the end it is not refreshing the page properly.the page refresh is my problem. i have defined the updatetarget id and returning view(model) from my controller but it is returning the master page with it.So the thing is that i am having a page with a page.I have used redirect as well which is not refreshing,
I'm trying to communicate with a Windows-hosted SOAP web service using PHP's SoapClient.The Web Service is intended to insert a new record for a member into a database.I can verify that my code using PHP's SOAPClient can successfully transfer the data via the Web Service to the database,but I am not getting the expected return value.
The Web Service description for what I should be getting as a return is described below.On successful execution of the Web Service code,I am getting nothing back despite calling LastResponse function and LastResponseHeaders.It seems no XML is getting returned at all.I am using other API calls within this Web Service and they all seem to work fine with the expected XML returned whenever I invoke a method.but for this one,which involves sending data,I'm not getting a return
In Windows 7, I get this error message when installing VWD2010 Express "Visual Web Developer 2010 Express This product did not install successfully." This is the log file from Web Platform Install 2.0
