DataSource Controls :: Dynamic SelectCommand Won't Be Passed After Partial Page Update?
Mar 11, 2010
I have a page has Listview and Datapager inside UpdatePanel. When I refresh the new SQL results and bind by pressing link buton outside of the update panel, I get correct results. (get new SQLselect statment, rebind to listview, update updatepanel)
However, the SelectCommand is not bound right or some other reason, if I press datapager, I won't get no results.
I'm guessing it's caused by not passing new dynamic selectcommand since my datapager and listview works first update.
View 4 Replies
Similar Messages:
Feb 19, 2011
My SqlDataSource has no selectCommand defined in the .aspx page. Instead I define it in the code behind dynamically depending on some parameters that the user selects and then clicks a button to perform the query (custom search filters basically). The problem is that when I click on a different page in my dataPager, or I click to sort any of the columns the gridview becomes empty when the page refreshes. I did a check and the selectCommand becomes empty when the page posts back. Is there a way to prevent this from happening?
View 2 Replies
Sep 28, 2010
I have a SqlDataSource setup in the markup on my page. After some new requirements, I am trying to find a way to modify the SelectCommand before the data is filled for the first time. The SelectCommand below will now be used by default since we'll always have the first param. I am faced with a need to modify the SelectCommand though, adding a second session parameter along with it. I tried to override the OnInit method but it didn't seem to help...it still used the default query. Is there a best way to accomplish this? Here is the section of markup I am referring to:
[code]....
View 2 Replies
Feb 2, 2010
With asp 2.0 and vwd 2005, I have a page with a radiobuttonlist, textbox and gridview with edit/delete. Using the radiobuttonlist, the user selects a search type and then enters the criteria in the text box. the click event of a submit button checks the rbl.selectedindex and chooses a sqldatasource.selectcommand with the where clause getting its criteria from the textbox. The gridview loads the data, but the edit/delete are not working. Code and relevant markup is below
[Code]....
[Code]....
[Code]....
View 3 Replies
Dec 6, 2010
i have the following:
[Code]....
which is called in the controller for my index view which then calls a partial control
this does what i want for the first level in. How do I get it to work for N levels? my view
[Code]....
the count is 0 after the first time through. How can i get the partial view to take what is passed and find its children to that parent
View 7 Replies
Mar 17, 2010
Is is possible to initiate a partial page update whenever a client makes an update (say inserrting a record) and this will update the panel of all clients who are actually viewing the page ie eliminate the use of a timer control to refresh the panel each second because am getting many problems when using timercontrol.
View 2 Replies
Mar 30, 2011
How to get sqldatasource1.selectCommand value
[Code]....
i want to set that if nothing return i will display a msg to users.
View 7 Replies
Sep 4, 2010
I have a gridview with a sqldatasource with SelectCommand as below:
[Code]....
but it's not workling.....
View 1 Replies
Oct 11, 2010
i have an SQLdatasource in my page
i was trying to modify it as:
SQL.SelectCommand = "Select * from " + TXT_Tabella.Text;
because i want update dinamically my sql server tables but ,every time i am going to sort, or change page the selectCommand returns as before!
viewState is true! how can i have an SQLdatasource dinamyc by tableName? and how this problem occurs?
View 3 Replies
Jul 7, 2010
I am trying to pass a variable within a selectcommand statment in ASP.NET and I have researched online how to do it but I can't seem to find a way to do it...What I am trying to do is write a code for a web page that will display a page with useful links on it where the links are separated into different topics and where everything is dynamically grabbed from a database. This is what I have so far:
<!-- Start MainContentRegion -->
<h1>Useful Links</h1>
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
[]code...
View 4 Replies
Dec 21, 2010
My SelectCommand string in my asp:SqlDataSource is very long. Is there a way I can chop it up into different strings on several newlines to make it more readable?
View 4 Replies
Nov 17, 2010
I have a DDL with 2 options: "Trainer" & "Observer." I'd like to use the selection from that DDL to reference a field in the SqlDataSource SelectCommand.
There are 2 fields in the table that may be referenced in the SelectCommand:
"Trainer_Oracle_ID" & "Observer_Oracle_ID." I'm trying to do something like:
WHERE @Oracle_ID_Type = <%=DropDownList_Oracle_ID_Type.Text%>_Oracle_ID
i.e. User selects "Trainer" and the SelectCommand references the field called:
"Trainer_Oracle_ID."
View 6 Replies
Feb 8, 2011
I have a database with two columns: Retailers or Traders. A row can have only one of them with values while the other must be 'Null'. Both are nvarchars kinds. What I am trying to do is to show data if a radio button is selected for either Retailer or Trader. So I constructed a SelectCommand statement which is getting column names of either 'Retailers' or 'Traders' as a parameter but the SelectCommand statement still returns all records. What can I do?
<asp:SqlDataSource ID="dsSearchResults" runat="server" ConnectionString="<%$ ConnectionStrings:AdoFabricsConnection %>"
SelectCommand="SELECT Name,Address1,City,State,Zip, Telephone, Email_Address, TO_THE_Trade, Retailer,
[code]...
View 1 Replies
Jan 7, 2011
I have a question related to <asp:SqlDataSource's SelectCommand. How to pass a querystring like <%# Eval("PhotoID") %> in the selectCommand. The whole frontend code is attached. I put
<%# Eval("PhotoID") %> and the photoid gets printed in the page.
<%# Eval("PhotoID") %> is the current displayed picture's PhotoID.
I want to pass this PhotoID or I want to pass <%# Eval("PhotoID") %> to the select command dynamically. I have tried the following approaches:
1) <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:aspnetdb %>" SelectCommand="SELECT UserName, commentDesc, uID FROM photo_comment_view Where pID = @pID"> <SelectParameters><asp:Parameter Name="pID" DefaultValue="7" /></SelectParameters> </asp:SqlDataSource> The above works but it gives only information about PhotoID 7, but there are other photos; How to set pID's value to <%# Eval("PhotoID") %> in ASP .NET's frontend page? then I also tried,
2) <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:aspnetdb %>" SelectCommand="SELECT UserName, commentDesc, uID FROM photo_comment_view Where pID = <%#'Eval("PhotoID') %>"></asp:SqlDataSource> Gives Parser error: Parser Error Message: The server tag is not well formed.
What I should do so that I can pass current PhotoID to SelectCommand? The frontend code:
<%@ Page Language="VB" MasterPageFile="~/Default.master" Title="Your Name Here | Picture Details"
CodeFile="Details.aspx.vb" Inherits="Details_aspx" %>
<asp:content id="Content1" contentplaceholderid="Main" runat="server">
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<div class="shim solid"></div>
<div class="page" id="details">
<%--Update Panel Here--%>
<asp:UpdatePanel runat="server" ID="updatepanel">
<ContentTemplate>
<asp:formview id="FormView1" runat="server" datasourceid="ObjectDataSource1" cssclass="view"
borderstyle="none" borderwidth="0" CellPadding="0" cellspacing="0" EnableViewState="false" AllowPaging="true">
<itemtemplate>
<div class="buttonbar buttonbar-top">
<a href="Albums.aspx"><asp:image ID="Image1" runat="Server" skinid="gallery" /></a>
<asp:ImageButton ID="ImageButton9" Runat="server" CommandName="Page" CommandArgument="First" skinid="first"/>
<asp:ImageButton ID="ImageButton10" Runat="server" CommandName="Page" CommandArgument="Prev" skinid="prev"/>
<asp:ImageButton ID="ImageButton11" Runat="server" CommandName="Page" CommandArgument="Next" skinid="next"/>.................
View 14 Replies
Dec 1, 2010
how to query the system date in selectcommand in gridview without using the codebehind. using c# .net
my code:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" SelectCommand="SELECT * FROM tablename where date_today = <SYSTEMDATE>" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName
%>"
View 1 Replies
Nov 17, 2010
In an asp.net 3.5 web app, I have a page with the following markup/code (this is the brief version, but I believe I got all the relevant info).
[Code]....
The form contains 2 different record types, accessed using the paging controls, depending on the ParentSR field; a parent SR will be something like '1234' while its sub-record will be something like '1234.1'. There are only a few differences in the fields used between the 2 different record types and that is why they are stored in the same table. However, the activity depends on the record type. When browsing from the parent record to the sub-record, the itemtemplate loads fine (notice in the formview's datasource
query, that the sractivity_id field is being pulled along with the subquery value). But when going to edit the record, the page throws an error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ArgumentOutOfRangeException: 'ddlActivity' has a SelectedValue which is invalid because it does not exist in the list of items.
If i click 'back' and retry, it may take 3 attempts, but then the edittemplate will load just fine. I should also point out that this error does not always occur. I've been trying to figure this out for a couple months and it is driving me nuts, mainly due to the fact that I can't reproduce the error in development--it seems to only occurr in production. Anyone with any thoughts on what is going on?
View 1 Replies
Nov 7, 2010
I've got a gridview which works fine. I use dropdownlists which are filled with distinct values of the columns. So when I select an item in a drompdownlist the gridview refreshes based on the selected value. When I have a column which uses string values, I can start the filter with a default % value to use in my select paramaters. But when I have a date column, I can't use that. I use a datasource for the gridview and I prefer to leave codebehind out if this is not needed. Now I use >= in my gridview select to show all rows. but I want to use only = to make the filter work correct when I select a date in the ddl and use the selectedvalue in the gridview selectCommand
<asp:DropDownList ID="ddlUpdateDatum" DataSourceID="dsPopulateUpdateDatum"
AutoPostBack="true" DataValueField="UPDATEDATE" runat="server"
CssClass="selectinput" AppendDataBoundItems="true">
<asp:ListItem Text="All" Value="01/01/1900"></asp:ListItem>
</asp:DropDownList>
<asp:SqlDataSource ID="dsPopulateUpdateDatum" runat="server"
ConnectionString="<%$ ConnectionStrings:GAMSYSTEMSqlServer %>"
SelectCommand="SELECT DISTINCT(UPDATEDATE) FROM [messages] ORDER BY UPDATEDATE ASC ">
</asp:SqlDataSource>
And I use this in the gridview datasource:
<asp:SqlDataSource
runat="server"
ID="dsGridview"
ConnectionString="<%$ ConnectionStrings:DBSqlServer %>"
SelectCommand = "SELECT * FROM [messages] WHERE AND UpdateDatum >= @UpdateDatePar ORDER BY UpdateDatumDESC"
>
<SelectParameters>
<asp:ControlParameter Name="UpdateDatePar" ControlID="ddlUpdateDate" PropertyName="SelectedValue" Type="string" />
</SelectParameters>
View 2 Replies
Apr 16, 2010
I have a page with a (gridview nested within a gridview) in an UpdatePanel (UpdateMode="Conditional"). The nested gridview drops down when you click on an arrow and then you can click on each subgrid rows command field. The gridviews are loaded from the Page_Load event. When I click on the commandfield in the subgrid the Page_Load fires during the partial page postback. From what I have read this is normal with UpdatePanels. But What I don't understand is why both Page.IsPostBack and ScriptManager.GetCurrent(Page).IsInAsyncPostBack test false after I click on the command field in my grid. I need to stop the rebinding of the gridviews ( which causes the subgrid to collapse ) when the command field is clicked.Also: I am using MasterPages and the <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> is located in my mater page form section.Would anyone have any suggestions how to test if a partial page postback is occuringHere is a link to the page source: http://pastebin.org/153774here is a link to the code behind: http://pastebin.org/153781
View 2 Replies
Feb 12, 2010
Below is my aspx
<asp:ObjectDataSource ID="InvitationObject" runat="server" UpdateMethod="EmailUpdate" SelectMethod="ListEmail" TypeName="InvitationDataObject" OnSelecting="InvitationObject_Selecting" > <SelectParameters>
View 3 Replies
Dec 30, 2010
I am using update panel in my ASP.net page for partial page postbacks. I have gridview and a button "Export" which on click will call the Export method from the below class. If I remove the update Panel everything will work as expected. But if there is a update panel it will not work and throws this error.
Below is the code for the
using System;
using System.Data;
using System.Configuration;
using System.IO;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
[Code]....
View 1 Replies
Mar 8, 2010
I have an interesting problem when using partial page update in asp.net with scriptmanager and a update panel.
My scenario looks like this: I'm using the tab control from the ajax toolkit. I also implemented this control using lazy loading, so that when the page is loaded only the current tab gets loaded all the other tabs don't get rendered, because Im using an UpdatePanel (on a .ascx control) on each of these tabs and when a tab gets selected the updatepanel makes a async postback to load the content for a selected tab.
On one of my tabs Im using a combobox control from obout.com, and it doesn't work. Now I know why it doesn't work. It doesn't work because the control is shown via a partial page refresh, but to correctly display the control it has to do some "magic" that is - register some .css and .js includes on the page (in the head I guess)....but because I load this control via async page refresh.
View 2 Replies
Jan 11, 2011
UpdatePanel1 contains dynamic controls and a Treeview,
UpdatePanel2 contains Image, and UpdatePanel3 contians dispaly information and several buttons. I set up the Triggers in the UpdatePanels.
however when I click one of the Buttons the dynamic controls in UpdatePanel1 get wiped out but the state of the rest of the controls seems ok. I would like for the dynamic controls to stay.
View 3 Replies
Jan 14, 2010
- When I execute my query within Enterprise Manager giving the "Country" parameter a value of US, it returns the expected records
- When I assigned that value either programmatically or within the SelectParameters of my SqlDataSource, no rows are returned at all...
I have this as a parameter in the sproc:
@Country char(2) = NULL
and the relevant WHERE clause entry is:
AND (@Country IS NULL OR a.CountryCode = @Country)
My SelectParameter is:
asp:Parameter Name="Country" />
I've tried adding the "DefaultValue" property set to "US" and also tried setting it as sds.SelectParameters[4].DefaultValue="US"
When I do either of these things I get no records returned...
View 2 Replies
Mar 18, 2010
I am trying to update a records by calling a SPROC throgh my SQLDataAdapter.Here is my code in this order :
[Code]....
I have looked for parms which are field names with the @ in front but I can't seem to locate them in my code.I could use the assistance of a fresh pair of eyes.
View 2 Replies
Mar 1, 2011
Ive came into a problem when using partial page update. The javascript doesn't fellow. What i want to do is when i call a partial page update some of the update have controls that require a javascript code to be executed. When the partial update is done that javascript isnt here and cannot be found. So what is the best way to make a javascript file to fellow a partial page update ?
View 1 Replies
