Security :: Login With Username And Password In Access File
Apr 26, 2010i am adding a login feature to a website with the user name and password stored in an access database table? can this be done through the WAT tool?
View 7 Repliesi am adding a login feature to a website with the user name and password stored in an access database table? can this be done through the WAT tool?
View 7 RepliesI am trying to login usng form authentication from my web.config but it does not work. In the web.config i have the following: (i am going to make the password secure but just need to work with the basics
<location path="~/Admin">
<system.web>
<authentication mode="Forms">
<forms name="authCK" loginUrl="~/admin/adminlogin.aspx" protection="All" timeout="30">
<credentials passwordFormat="Clear">
<user name="admin" password="1" />
</credentials>
</forms>
</authentication>
<authorization>
<deny users="?" />
</authorization>
</system.web>
</location>
my asp code is
[Code]....
what it could be ive tried all sorts but it keeps saying incorrect username or password which is the failuretext above.
I have only username. and want to check and grab the password from the database. It is BEFORE LOGGING IN. so I don't think the build-in asp.net functions could be used, right?
View 5 RepliesIn my application i have login Page in that i have login Control of asp.net, when user clicks on submit button i am authenticating the user and and redirecting to default url.
now what i want is using address bar i want to authenticate the same process with out opening the login page and give user name and password in the login control. Directly i want to inject the username and password in the address bar and need the same functionality what the submit button does.
i have articles on net using post methods but i am not able to do this.
i want to login with window username and password using active directrory in my asp.net application.
View 3 Replies Foe getting Logon computer username i m using digest authntication mode. But when i browse website it's asking for username and password. while already windows login with the same username.
I understood that in this auhtntication mode it's required. But r there any configuration with it i am not getting this Prompt ? Any group ploicy ??
For IE i have added website into trusted zone but still it's asking for username and password.
R there any other way i getting Computer logon name in asp.net application. There are But only work when i run from Editor from IIS it's not retuning value.
I have a folder with username and password over it.I wanna make a page where i can access files under that folders in .net and be able to download them.How to code that in VB.net?
View 2 RepliesCurrently I am storing my username and password (passwordFormat="SHA1") credientails in my web.config. I would like to figure out how to access them in an xml file that I have stored in my App_Data directory rather than the web.config file because I do not want my application restarting everytime I manually add a user (small list of 5 authorized users for the CMS section).
Here is what my web.config section looks like:
<authentication mode="Forms">
<forms name=".Administration"
loginUrl="~/SiteAdmin/Default.aspx"
defaultUrl="~/SiteAdmin/Administration/Default.aspx"
protection="All"
timeout="30"
path="/"
requireSSL="false"
slidingExpiration="true"
enableCrossAppRedirects="false"
cookieless="UseDeviceProfile"
domain="">
<credentials passwordFormat="SHA1">
<user name="username" password="474BA67XXXXXX3B36DFD8A7BED6C85B04943" />
</credentials>
</forms>
</authentication>
i have added a login object from toolbox ,,now where can give my own username and password in properties window of that login object or i have to write the code in home_frm.aspx.cs file
View 3 RepliesI want to show the password from database into Label,I have wright code following
SqlConnection con = new SqlConnection(@"Data Source=TEGADEV1SQL2K5EXPR;Initial Catalog=mydatabase;Integrated Security=True;Pooling=False"); SqlCommand cmd = new SqlCommand("select password from reg where username='" + username + "'", con);
cmd.Parameters.AddWithValue("@username", username); SqlDataAdapter da = new SqlDataAdapter(cmd); DataTable dt = new DataTable(); da.Fill(dt);
Lable.Text=......
I have use datatable how to read data from above code what will be the code wright Lable.Text=...
I want to use autouser login in my website using ASP.NET C#.i.e., If I say that autouser login, this means user has to include user id and password to url for verification.
Example: http://10.9.80.210/Rmax/abc.aspx?Username=xyz,Password=1234Here, 'UserName and password' will be as autouser login, '10.9.80.210/Radmax' is the website url, 'abc.aspx' page is any of the page of website.
Is it possible to allow users to login with Email, UserName, Phone or Password. but landing page should only select record by UserNme
LOGIN
protected void OnAuthenticate(object sender, AuthenticateEventArgs e) {
string constr = ConfigurationManager.ConnectionStrings["con"].ConnectionString;
int UserID;
using (SqlConnection con = new SqlConnection(constr)) {
using (SqlCommand cmd = new SqlCommand("Validat_UserTable"))
[Code] ....
My Login.aspx form in Visual Studio 2013 just seems to be 'static' after I enter the correct username and password. I don't get any errors. My Login.aspx.vb code looks like this:
Code:
Imports Microsoft.AspNet.Identity
Imports Microsoft.AspNet.Identity.EntityFramework
Imports Microsoft.AspNet.Identity.Owin
Imports System.Linq
Imports System.Web
[Code] ....
Don't I need a file name/URL to direct the user to after he has successfully logged-on? How would I script that? Finally, I only have one Web.config file (associated with Register.aspx) and that looks like this:
Code:
<?xml version="1.0"?>
<configuration>
<system.web>
<customErrors mode="Off"/>
[Code] ....
I don't need another Web.config file for Login.aspx, do I?
i have a username and password in my portal... i want to connect to the active directory to verify the username and password of the user? using c# .net
View 1 Replieshow to make login control allow users to login by either username or email address
View 1 RepliesI was just trying to install Umraco CMS on my ASP.NET website. I am using the Web Platform installer from Ubraco http://umraco/downloadI pointed the CMS install to the local website folder where it was intended to be installed and specified to use an existing database for the same. It is asking for the some username and password for the Database access. Is there some default value of the these particulars for these because I never configured the username and password for my DB? (It is a MS SQL Database)
Screenshot:[URL]
I have created a test user/password on my web site. The intent is to have prospective clients login and try out the tool. Instead of telling them the userid/password of the test user, I'd like to tweak the Login wizard.
In the Load event, I was able to specify login1.UserName = "test user"
But when I try to specify the password, I'm told it is a readonly field. How can I 'force' a specific password? Or, how can I call the login event directly and pass the needed values?
I designed a website, in login page username and password should be encrypted and sent to server for validation. How to do this.
View 5 RepliesIn C# I need to connect to a database. How do I find out the username and password to use for that database? I know that sometimes the "sa" username can be used. I don't know how to find the password though. I am working on a contract and no DBA, and the developer left for a different job.
View 1 RepliesI am kinda new to WCF and the setting up of service and have 2 questions. My first question I have a service that will be accessed via https on a web server. However locally on my local IIS7, it will be accessed via http as https is not available. How can I set up a service to be accessed by both?
My second question is regarding how I can set up a service that requires a username and password to be accessed. The service that I have in place I dont want methods within it to be accessed unless the calling application has the rights to do so?
Here is an example of the relevant area of my web.config file.
<system.serviceModel>
<bindings>
<webHttpBinding>
<!-- standard AJAX binding that supports SSL -->
<binding name="TransportSecurity">
<security mode="Transport" />
[Code].....
In this config, the service is set up for http only and not username/password applied to it.
For testing I used this:[URL]Encrypts only the password is not encrypted and username.Why not?For security reasons, I would like also to encrypts username.
View 10 RepliesI have an intranet run with IIS, with basic authentication config. See more in this screenshot:
[URL]
Of course, then, when user login, this screen will appear:
[URL]
After successfully login, is there any method to get UserName (very easy to get) and also Password (don't know yet) from asp.net coding (run at server)
I am trying to implement a small site which requires users to login using Forms based authentication. I have followed the tutorials found on various sites on the net and in particular the one at [URL]
This enabled me to get a sample environment in place but it seems as though I am having a problem authenticating a user for which I know the username and password are correct.
I have a ASP.Net 3.5 site with my login.aspx form in a folder named login, my default.aspx in the root of the site and my protected content in a folder called main.
I am authenticating against a SQL Server Express database, so I have ran the aspnet_regsql.exe command to populate my database.
I have added the following authentication/authorization lines to my web.config
<authentication mode="Forms">
<forms loginUrl="~/login/Default.aspx"
protection="All"
timeout="30"
name="AppNameCookie"
path="/FormsAuth"
[code]...
I believe that my connection string and my database are ok because if i use the ASP.NET Configuration from within Visual Studio I can create and manage my users and I can also see them in the tables in the SQL Server. Also if I do enter any incorect credentials in my login page the page tells me that the password is incorrect.
I got a username and password field which made by myself and a User database which is all manually made
So now I wish to know how to authenticate user using the username and password data enter by the user and match with the database data to verify user is a member and login?
For what i know, the code should be something like this
SELECT UserName, Password FROM dbo.User WHERE UserName - @UserName
@UserName = ?
How do i assign the value from my username text field to @UserName?
so I will admit this is a pretty stupid question. To my defense, I have never done it before. So take pity. I followed Joe Stagner's video on using the built-in authentication. Now, I would like to query a database using VB.net codebehind to verify if the user exists. I am clueless. Yes, I have a connection string already.
[Code]....