This is the setup in short. I have a big table. Everytime a cell get focus an asyncron call to the server is done (with PageMethods) and some data is returned and updates a infobox in the page.I have written code that makes it possible to navigate between cells with the arrow keyes.
The problem occurs when I shift focus fast through several cells in order to get to the cell I want. Every get-focus is executed and since the communication with the server takes about half a second it get quite irritating and not very user friendly.Ideally I would like to execute only the last focus event. But how? I cant know which event is the last one, can I?
i think The javascript function called by using RegisterStartupScript or RegisterClientScriptBlock executed after the code in the method is executed.I want to execute the javascript function called by RegisterStartupScript or RegisterClientScriptBlock to be executed before the code in buton click method is executed. For that what should i do?
I have a c# function for producing thumbnail images, these images are displayed on web-page i.e ASP.netSo how would i programtically call this back-end function let say everyday at 16:00 or at 3:00.
OK, this feels like a question that should be easy to answer, but as with so much mixing of asp.net and jQuery, it's a bit of a nightmare.
What I want to do is be fading a div in and out at various times during the client's viewing of my asp.net page; I fade it out using jQuery's fadeTo() before triggering an UpdatePanel update (to indicate that the data there is not fresh) and I want to fade it in again once the UpdatePanel has been updated. I've gotten as far as updating the UpdatePanel in the codebehind, and this results in the div's content changing... but how do I fade the div back in again?
The way I see it, there are 2 ways; register an event handler on page load to detect when the div's content has been changed and fade it back in, or call a function from the asp.net codebehind when I've updated the div to fade it back in.
In the first case, there doesn't seem to be any event triggered by the div's content changing, so I can't seem to do that. If anyone knows how I could get a client event to trigger when I update the div, that would be a nice solution.
In the second case, I thought that this was what ClientScriptManager was for, but it doesn't quite do what I want. I want to be able to register a particular Javascript function with ClientScriptManager and then tell ClientScriptManager to execute it in the client, from my codebehind. You can't seem to do that. ClientScriptManager.RegisterClientScriptBlock() simply inserts some <script> into the HTML output, rather than calling a function. Presumably this would work if I kept registering things like:
<script>fadeBackIn();</script>
because the Javascript would be immediately evaluated and run, but this feels messy, and that feeling is intensified by the fact that I'd have to keep randomly generating a new unique value for the key argument of ClientScriptManager.RegisterClientScriptBlock(), because it's specifically designed to stop this kind of repeated code. However, I'm struggling to see an alternative.
In my website, I want to create a seperate thread for a process which needs to constantly run in background. I want to use threading so that my website performance is not degraded.
I want to create thread for following code.
[WebMethod] public void iterativeFunction() { int count = 0; DateTime date1 = new DateTime(2011,5,31); while (System.DateTime.Compare(System.DateTime.Now,date1)<0) { downloadAndParse(); count++; } }
I want to call an action method when an textbox gets focus to get a description of the model object that field is associated with from a database.
I have this jQuery function:
[code]...
It works fine as far as getting the test text, but the problem is if I set a breakpoint in the action method, I see that it gets called over and over, not just when i change focus in the text boxes...
I'm having some trouble getting this to work. basically I got the modalpopup to show, and when it's shown i have 2 buttons (Yes and Cancel). When yes is clicked i want a function to be called. Here is my asp.net code:
Protected Sub btnDelScnYes_Click(ByVal sender As Object, ByVal e As UI.UIIterationList.IterationListEventArgs) Handles btnDelScnYes.Click Dim scn As dat.Iteration = New dat.Iteration(e.iterationID, SessUserID) scn.DeleteIteration() Response.Redirect("Calibration.aspx") End Sub
Not sure if this is useful, but just some info: My page have a list of iterations. there are several columns to this table. when the last column is clicked, the modal popup shows and asks the user if to confirm if he/she wants to delete this iteration which is this code:
Dim scn As dat.Iteration = New dat.Iteration(e.iterationID, SessUserID) scn.DeleteIteration()
so i'm trying to get the funtion to be called, but it's not working. when you click "OK" nothing happens. when i debug it and trace the logic it doesn't even go into the above VB subroutine.
I have a dropdownlist on a web form that isn't calling a routine when I click on a new item in the dropdown.Here's my code from the .aspx file
[Code].... [Code]....
My list is populated with a blank item as the 1st entry and then all the alerts that I have in my database. I originally had OnSelectedIndexChanged but that didn't work either.
I have asp.net webpage in that image div should change image when a button is clicked. I want to add fade in and out effect so I use jquery. The code is
[Code]....
But image never is changed. So I think something wrong with ChangeImage().
I added a Button and a LinkButton to same page and set same properties to both of them. LinkButton works fine but Button's PostBackURL not work after executing javascript (Clicked "OK" in message window). it posted back to same page instead of second page. following is the code:
I have a grid view in which when i enter values and press submit button , all the values were shown on the grid . I want to edit the row and after that updated it.
I have used RowEditing function but when i click on the edit button it appears to be blank page means that row editing function not called.
I want to execute code written in a dropdown selectedindexchanged event from some another user defined function.
For this i m writing:
ddlMyDropDown1_SelectedIndexChanged(sender, e);
It works when use it in page_load (means the code in ddlMyDropDown1_SelectedIndexChanged is executed) but when i write the same line in another function it gives error "The name sender doesnot exists in current context".
I am writing my first AJAX enabled page. Basically I am trying to expand out the lines of a Purchase Order (PO) using our company database. What I want to do is have a button that will that will call on a javascript to update a div field with a table for the PO lines of that PO and at the same time change the function that is called by the button to a function that will collapse the list. How would i do this?
i have gridview with linkbutton.when i click linkbutton it should call javascript function which returns value would be input for database functions. how do i capture javascript function retun value(i am using Registerclientscriptblock)? and that should be input for database function. Inshort i need to call two function from link button click - one javascript function,one ado.net function which will update value in database. output of javascript function will be input for database function.
function Getlogitudelantitude(address) { return "35.3434343,-74.334343" } Linkbutton_click(object sender,Eventargs e) { register javascript function .. which should return value string s = "35.34343,-74.334343" then call database function(s) - does database operation } }
I have developed a web application which contains aspdotnet treeview control. In this treeview control has binded with some database value.. that controls has one parent node and more than one child nodes for each parent node.
my problem is here, when the user clicks the parent node, I need to fire a javascript onclick function before the server side event(SelectedNodeChanged) called..
If I provide javascript to the parnet node when it is binding, then I could not fire the server side event(SelectedNodeChanged).
How to provide onclick javascript event for parent node in treeview control even the parent node has SelectedNodeChanged event.
I have a button within a TabPanel and i have a button click function written in Jquery that is not executing when i click the button. If i remove the tab panel and container it works, but i would like to use the tab panel/container functionality. See code below:
I need the onclick to be called twice, once for JS client side validation and once for C# serverside validation, when I try this function I got the error saying that only one onclick function maybe called. Does anyone know how I would go around checking both client and server side validation with one click? I've got no idea where to start and the search engines are only returning one of each (either server or client).
I have this import function which can be changed by the client in his desired way.Now I want to code such that if the client tries to import his own data on the page and doesnot give the tags in the order mentioned below his import function should be stopped.
It shouldn't make any changes unless the tags are in the right format because the problem now is if the tags are not in the right format when client changes then its importing over the existing files and directing to an error page which I dont want it should simply stop the import function if they are nt in the order.the code for this function is below
i followed this link [URL] and i get selected value from dropdownlist using jquery
i created 3 partial views .
i need depend's on dropdownvalue redirect to partial page , so how can i implement in jquery with conditions?? or how can i implement in this function Public Function FetchData(ByVal dropdownValue As String) As ActionResult??
<asp:LinkButton CssClass="button" ID="btnApply" runat="server" OnClick="btnApply_Click()" OnClientClick="Apply1('btnApply')" > hi ihave this functin in .vb file Protected Sub btnApply_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnApply.Click end sub
