"No Symbols Loaded For The Current Document" C# Project
Mar 30, 2011
I hate VS and this symbolic gibberish that never seem to have same solution (if it once was logic) twice. The screendump below says what it says.
As soon as I F5/Start the web project, the breakpoint going yellow. This ONLY affect the aspx.cs file that being changed. The other aspx.cs files can have breakpoints.
When I do rebuild/build all DLL and PDB files are created just fine. They have same compile time and are in same directory. Module-Windows i VS says the symbols are loaded perfectly. Well, yeah, try bite me!
I can tell, all symbolic is working just fine, until I was about doing changes inside those aspx.cs files (which was some time ago since last time). If I reset back the file, the breakpoint are working. If I try to make changes in another file, the problem appears there.
It simply appears like that the symbolic file generator don't understand changes maded in aspx.cs files..
View 3 Replies
Similar Messages:
Oct 13, 2010
nfortunately, I can't get my breakpoints to work when in debug mode in Visual Studio 2008 (ASP.NET 3.5, Windows 7, IIS7). The website compiles and opens in debug mode, but the breakpoints themselves generate the following error message:"The breakpoint will not currently be hit. No symbols have been loaded for this document."There are some recommended solutions online, but for various reasons, either they haven't applied or I haven't been able to make them work. I've been trying to find the solution for about 12 hours now, and I'm getting desperate.(Note 1: This problem is specific to this website. I do have other websites that I open in VS2008 where the breakpoints work fine.)(Note 2: There is only one website/project associated with this problem. This website does not have multiple projects.)
View 1 Replies
Oct 28, 2010
Some days ago all of my projects started working crazily - I'm using VS 2010, .NET 4.0, Silverlight 4 SDK, WP7 SDK. The previously compiled code parts can be debugged as they should be, but as soon as I make any change to the observed .cs file all symbols are ignored.
"The breakpoint will not currently be hit. The source code is different from the original version."
However, the compile is successful, moreover the changes in the code can be seen in the debug mode as well (e.g. if i add messagebox.show(...) it works as expected), but I'm unable to debug the project.
This happens to my Silverlight, WPF, WP7 solutions, Web Applications, so everything important. The most annoying thing is that I even reinstalled Visual Studio, the whole .NET Framework 4 Client Profile, but nothing changed.
I don't want to reinstall the whole OS, but this way i'm unable to work:/
View 2 Replies
Feb 25, 2011
I had an issue when I began working on my project, see this thread where I couldn't debug my DLL's. All I had to do to solve it, though it took me forevever to find this, was to hit F5. This doesn't make much sense since they are DLLs and I get a message that I can't run them directly, but whatever, it works. The output is generated as debuggable and I can copy it to my deployment directory and run and hit BPs (I attach to aspnet_wp).
My VS solution is four projects, all are DLLs, and one is called directly by my web application and it calls the others. There are two I am interested in debugging as I am enhancing them.
Maybe I jinxed myself, but I was actually musing recently that if I never figured out why I couldn't debug I'd never have progressed as much as I had in my task. Yesterday I backed up my project to a zip file - source and DLL's - because I was starting on a new piece. The only thing I did to the solution after that was move a module from App_LocalResources to App_Code, then I moved it back. And I added some code. When I tried to set BP's the next time I ran, I got "symbols not loaded". I haven't been able to debug since. I tried restoring the zip file since yesterday I could debug, but I didn't hit BPs there either. I will be researching this the rest of the day, I am sure, but I thought I would ask for specific since maybe I can tell you something that will you to know what I did wrong or you can throw out a question that will trigger to me what I am doing wrong. This is really not how I wanted to be spending a Friday.
View 2 Replies
Mar 15, 2010
I have a website that I have release onto our server. I am trying to debug an issue. I start my Site. I open VS2008 I select attach to process and all my break poins are changed to the empty circle withthe error no symbols loaded. I try to go to debug -> Windwos -> modules but I do not see my .dll on the list to load sysmbols for. I have the smae .dll and .pdb on the server as on my local machine. My build mode is Debug. the server is using IIS7. Ihave tried deleting the Windows -> Microsoft.Net -> Framework -> v2.0.50727 -> Temporary ASP.Net Files.
View 2 Replies
Apr 6, 2010
I am unable to register my control from another project in my current project. I have a commoncontrols project and a controlpanel project now how can i get the usercontrols from the commoncontrols project?
The controlname is ucReg.ascx.
View 6 Replies
Jan 7, 2010
I am trying to implement a feature where i open (suppose in iframe) a PDF file (multiple pages), Highlight a section of the document a get the page number (the one that is displayed in the PDF tool bar).Eg: if the toolbar display 2/7 which means i am right now in page 2, i need to capture the page number information.Sounds simple but i am not able to get a .dll/function that exposes this property.
View 1 Replies
Feb 16, 2011
[Code]....
i have hide the cancel button using javascript
and i wanted to display it when a listbox is visible hence i use these codes below
[Code]....
However i get a error saying The name 'document' does not exist in the current context. So how do i display the button?
View 3 Replies
Apr 9, 2010
I want to know if there is a way to set up the default document or default web page from the setup project of a web page.What I mean is that I would like my web app installer to set the default page (i.e: DefaultPage.aspx) when installing the web application. I remember I could do this in previous versions of the asp.net platform, currently I am working in ASP.NET 3.5 (Visual Studio 2008).
View 2 Replies
Apr 21, 2010
I am using Theme and skin to my current project.
I would like to know, can
1) Theme applied to asp:panel ?
2) Theme applied to AJAX update panel ?
View 7 Replies
Jan 21, 2010
in my current project I was developing the application using MVC.. but the problem is I am new to this asp.net MVC..
I am tryhing to work out same look and feel in my current application ..
View 6 Replies
Jun 10, 2010
We are using nested master page the master page is seperate class library project and all the other projects refer to them. We wanted to have a basepage class which load title, meta tags and keywords dynamically. It was working fine till it was inside the main project. We wanted the basepage class to be more generic and to have it reside in a single place. So i tried created a seperate class library project but i getting error "Could not load type" ..
How to have the basepage class outside the project?
View 3 Replies
Mar 11, 2010
This useful effect seems not to happen anymore. I'm in VS2008. If I have several files open as tabs, when clicking on each of them, VS used to highlight that file in Project Explorer, which is very useful to quickly see where in the Solution that file is, even if it's not in the Web Project.
View 1 Replies
Jan 26, 2011
I wasn't sure which subforum to post this in as it appears to be a complex widespread issue. I have a WebApplication that was mostly coded in VB but had two C# classes and everything was working fine and it was created in VisualStudio 2005 as a Website. I finally finished converting the existing WebApplication as it was to C# and everything compiled fine. Trying to organize and such I created new Classes, DAL and BLL and migrated the existing classes into the appropriate location. Still compiled fine. Here's where the problems started.
Wanting to move from a Website to a Project, I created a new project WebApplication and migrated all the files from the Website into the Project. I re-added the references to the classes and .Net components and updated all the project settings to mirror what was in place before. Now when I try to compile. BAM. 171 Errors, mostly "The name '' does not exist in the current context." It appears most of them are in regard to Profile or accessing page components (Labels, Textboxes, etc) I can provide more detail about specific errors if needed but I was hoping maybe I just didn't do something incorrectly when moving to a Project from a website.
View 4 Replies
Sep 13, 2010
I have use Nhibernate in my MVC Project by me known, Nhibernate have cache on Session and Object. now, I want use HttpContext.Current.Cache (system.web) for cache data something in project. my code same that have problem, haven't it. and that's right or wrong.
View 2 Replies
May 24, 2010
I have an ASP.Net MVC app, and i have some xsl files inside of the Content directory.I've try a few methods to get directory dynamically buy keep on coming short.So how do i get the directory to point to the Content/xsl folder?the closest that i came to was with this:this.GetType().Assembly.CodeBase
which only returns the project DLL, but i can't figure out how to move up a few levels from there or what .net library to use to navigate around the path.there's no ../.. :(Basically i want to navigate to the Content/xsl folder which is at the same level of the Bin directory.
View 1 Replies
Jan 24, 2014
<iframe src="http://docs.google.com/viewer?url=filename&embedded=true" style="width:600px; height:600px;margin-left:20px;" frameborder="0"></iframe>
I am using above code to show our document online.
But when we inspect element it is showing url of file which we dont't want.
it is possible to hide this url or any other alternate to show our document to user without exposing our physical file path.
View 1 Replies
Apr 15, 2010
I recently upgraded to Windows 7 64 on my development machine. I am trying to setup my development environment. I have discovered something strange. When trying to set breakpoints in my ASP.Net application the breakpoints will only work if they are in the root folder. My ASP.Net project has various sub folders and any breakpoints in code that is stored in the sub folders turns yellow when debugging starts and states breakpoints will be missed.
I have deleted the temporary folder in c:windowsmicrosoft.netframework .... etc. etc. etc. I have checked the folder permissions in the root and all sub folders (they are the same). I have deleted and rebuilt the subfolders. I have right clicked VS2008 and said to run as administrator. Nothing seems to fix it. I can debug root level code behind pages but anything stored in a subfolder will not debug.
View 20 Replies
Jan 10, 2011
IS it possible to use mathematical symbols in asp.net application.
I am developing a online assessment web application. In that I need to use mathematical sysmbols as question and the user also should be able to use that symbols.
Is it possible? Is any other third party editor is required?
Can I store that symbols into MS SQL database?
View 2 Replies
Aug 16, 2010
I have xml document and wanting to pass it through wcf restfull service, i am able to do that by using string format i mean i can pass the xml as string param in the restful service and it worked but now my xml document becomes huge so if i pass it as string then it gives URI long error. any way i can pass the huge xml document through the WCF RESTFul service.
View 1 Replies
Jan 24, 2010
Quesion 1:
How to check if a string str1 has at least one of such symbols: ~#$%^&*()[]{}@
Is it possible to solve this quesion using Regex? Any smarter way than this:
If InStr (str1,"~") or InStr (str1,"#") or Then End If
Question 2:
How to check if a string str1 consists of any combination of such symbols without any other symbol: ~#$%^&*()[]{}@
View 10 Replies
Jan 19, 2010
I have created a website in ASP.NET 3.5 that takes some input in text format and saves it in a SQL Server 2005 database.
The database field is varcahar(50).
But I can't do it if data in text box contains special symbols like <,>,#,@,.
It generates a client script error showing security error.
For scripting I am using JavaScript.
View 2 Replies
Jun 24, 2010
Special symbols are a real pain to learn about because you can't Google for them (try doing a Google search for "<%#" and you's get nothing).
I've been a programmer for many years, and I'm trying to get my head around ASP.net, and especially the "special symbols"; what they mean, where to find out more information about them. Because they're impossible to search for, it'd be wonderful if there were special resources in place to help newbies learn about these.
Specifically, I'm looking for detailed instructions on the porpose for, and use, of the following constructs:
<%@ %>
<%$ %>
<%# %>
<%= %>
What is expected in each, what is allowable in each, and what "gotchas" would a newbie have to be careful for when employing each.
For example, I want to do some coding in a <%# %> block, like:
Text="<%# if (Eval("InUse")) {Eval("ProductName")} else {"Not In Use"} %>"
-- would this be allowable, and if not, what are reasonable alternatives?
View 1 Replies
May 9, 2012
I want when user upload a doc file it convert into pdf. How can i do this. I read that itextsharp convert it.
View 1 Replies
Aug 5, 2010
I get following code (no server error, no html tags nothing... what I am copy pasting is FULL source code).
[Code]....
This goes on in several lines, no eed to repeat it all. There are no html tags, no server error... nothing. It happens on 3 pages, and only common things they have is a texbox TextMode="Multiline"... on first 2 it helped if that text area was empty or without any strange characters.But on 3rd one, I am simply raising postback from a checkbox to display or hide a corresponding textbox... so no data is being sent nothing..... I am totally baffled with this...
Edit: This happens on 2 IIS server (my local machine and other remote IIS that I use) but Cassini actually gives me a message error!
View 2 Replies
