I am using vs2008 sp1. I am building web site with aspx. I am also using an ajax control. My Site was working normally. I could run it from f5 and it would stop at a debug point. I added an additional aspx page. Then I got a strange error. When I pressed f5 a message box appeared saying that I had not made this version with the debug option. Then from reading an internect post I disabled only my code. That got rid of the message box error but now the debugger does not stop at any break point? Of course this happen when I need to go live with this project in a day.
I have a problem with Visual Studio Debugging. I use some Skin for my Web Application, e when I debug it, the debug controls stops on the skin. I press F10 multiple times, but I've never reached the end of the skin file in this way. It's a problem for me, since some times I don't know where the control goes after the skin. And pressing F5, I lose the control on the debug flow. Does someone know how to avoid the Skin debug (o better, the debug of certain file extensions) in Visual Studio 2008?
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
I have a vs2005 web application project,I upgraded my machine from xp to Windows 7, the web application project not working in vs2005 anymore, does anybody know why windows 7 not support web application project for vs2005? if i upgrade vs2005 web application project to vs2008, will that work in windows 7? and after upgrade, will the original web application project still a web application project or it upgrade to website project?
I have been working on this project for a few months in VS2008.. now that we are getting closer to the end, one of the other programmers has been working and doing his in VS2010, so when i try to open his projects in VS2008 it just shows up as XML.. so i have to open in VS2010.. thats fine..
But if i try to open my project in 2010, it prompts to use the conversion wizard.. Should i be concerned or are there any issues with doing the conversion? Being the end of the project, i dont want to cause issues at this point.. So would like to know if converting the project file at this stage in our project a good idea? Will there be any issues using his code with mine since they were developed in 2 different versions..
I just upgraded to Windows 7. On Win XP, I could set breakpoints in an ASP.Net project and those breakpoints would hit from any browser/tab on my machine. Using Windows 7, that doesn't work. The browser that launches when I hit F5 does, but no other instances/tabs do. If I try to explicitly attach to process to attach to another browser instance, it still doesn't hit.I need to debug this way because an error is occuring only when I enter the application by following an external link.
Some days ago all of my projects started working crazily - I'm using VS 2010, .NET 4.0, Silverlight 4 SDK, WP7 SDK. The previously compiled code parts can be debugged as they should be, but as soon as I make any change to the observed .cs file all symbols are ignored.
"The breakpoint will not currently be hit. The source code is different from the original version."
However, the compile is successful, moreover the changes in the code can be seen in the debug mode as well (e.g. if i add messagebox.show(...) it works as expected), but I'm unable to debug the project.
This happens to my Silverlight, WPF, WP7 solutions, Web Applications, so everything important. The most annoying thing is that I even reinstalled Visual Studio, the whole .NET Framework 4 Client Profile, but nothing changed.
I don't want to reinstall the whole OS, but this way i'm unable to work:/
I have web project and window project.Web project reference from window project and I want to debug from web project to source code in window project. Where do I setup to look for debug source code in window project.
I copied all source code from another computer. but on another computer can debug just fine.All that different is where the source file is located. so I think it should have some config in studio that tell where the source file is.
I am not able to debug a Remote web project (Where the project files are located in another server which is in the same network). I am getting the below error message:
Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData) at Excel.Range.get__Default(Object RowIndex, Object ColumnIndex) at InventoryADD.Button1_Click(Object sender, EventArgs e) in \10.38.23.228q1uatassettrackInventoryADD.aspx.cs:line 670
It works fine when i try to access the website through IIS. Shud i do some setting changes on VS 2005?
I have an ASP.Net project created by a team member on another computer. The project references a virtual directory that exists on my computer but under a different localhost location.Currently, the following error occurs when I try to open the project:
The local IIS URL http://localhost/foo/default.aspx specified for Web project foobar has not been configured. In order to open this project the virtual directory needs to be configured. Would you like to create the virtual directory now?[Yes] [No]
So, there are two options: select yes: It creates the virtual directory that it thinks I need, which I don't want to do. I already have a virtual directory somewhere else.
select no: This isn't an option, as the project opens, but without all the bells and whistles I know and love.
Where is the virtual directory location (in my case http://localhost/foo/default.aspx) specified within the project? Can I change this manually, say in a configuration file within the project, either before or after I open it? A configuration change seems more ideal than manually opening IIS to override a virtual directory path.
EDIT (solution): Buried in the comments below is the following answer (Thanks @Thyamine)This can be configured in the foo.csproj file for the project. Look for the lines:
I have copied my asmx hello webservice to a remote server where I tried to open the project I have this message. That I answer yes or no it cannot open the project VS stays blank.Originally I think I have clicked on associate this project with IIS Express. Now I don't know how to revert this.
I started working on an Asp.net MVC website using Visual Web Developer Express 2008 a while ago. Just recently, I managed to get my hands on a copy of Visual Studio 2008 Professional (through DreamSpark ). I installed the Service Pack, and also the MVC2 files for Visual Studio.
However, now I can't open my project anymore. When I try to open the solution in Visual Studio, it tells me that the project type is not supported. Does this mean that I have to resort to using VWD Express again? Is there perhaps some way that I can edit the project file so that it will load and compile correctly?
Note: I installed MVC2 through the Web Platform Installer, and it says that it installed successfully. However, I notice that MVC references in my unit-test project don't seem to be resolved either - is this perhaps because MVC2 isn't actually installed properly?
Im newbie to Visual Studio 2010 and asp.net. Have been working on a asp.net webpage project as home for some days now, and want to bring with me all project files to my office to continue work there. Using Visual Studio 2010 at home and at office.What is the easy way to do this in Visual Studio 2010?(Have been using Dreamweaver earlier, and then I just used FTP to upload my files to a webserver and download them at my office. Is this the "solution" in Visual Studio as well?
downloaded a project from a site,the project was built by vs2005.I only have web developer express 2008, when I load the project,it converted the project and opened it but there is nothing in the project. the project is a MVC project, all folders/files are not in the converted project.can I open the project (built by vs2005) using exppress 2008 for MVC? if yes,how?
I just created my first MVC2 project using the standard template. I need to be able to change the default browser for my project to test in IE (I use chrome as the default on my OS). Unfortunately, the right click on default.aspx suggestion which worked in MVC1 can't work with these new projects as they don't have that file.
Im working on a website project with Visual Studio 2010 from 2 different computers (home & work). In Dreamweaver Im used to FTP to upload/download files to/from a webserver to syncronice my files on the current computer Im working on.What is best option in Visual Studio 2010 to sync project files between home & work computers? I have seen there is a built in FTP, but seems only it can upload files, limited functionality?
when i opened my Visual Studio 2010 i noticed that my ajax tab was missing from my toolbox and ajax control kit too.Then i noticed even that when i create new website, there is no web.config in it and it should be.WHAT IS GOIN ON???? :/