Conditionally Return Web.config Entry?
Jan 31, 2010How do I return web.config entry conditionally.
I.E: If the web.config folder is 'C:inetpubwwwmyTestSite' then return 'connectionString' TestDB else return 'ProdDB'
Similar Messages:
MVC3 Razor - How To Conditionally Quit / End / Return Or Break A Partial View
Feb 15, 2011With Razor, how do you conditionally quit or end or return or break a partial view?
@if (Model == null)
{
return;
}
Adding Entry In Web.config Through Wsp Manifest File
Jan 7, 2011What should be the entry in the manifest file of the WSP if I want to add these 3 items in the web.config?:
[Code]....
How To Send Mail Using SMTP Settings? With Out Web.config Entry
Mar 26, 2010I want to send mail using SMTP settings. And it will not be configured in web.config. I want to set the SMTP settings at run time. How I can do this?
View 7 RepliesC# - Is It Possible To Create A HTTP Module Without Making An Entry Into The Web.config Or GAC
May 3, 2010Is it possible to create an http module without making an entry into the web.config or GAC?
View 1 RepliesWCF / ASMX :: How To Configure BasicHttpBinding Without Any Entry In Web.config File
Mar 31, 2010How to configure BasicHttpBinding without any entry in web.config file I think subject is good enough :)
View 4 RepliesConfiguration :: Programmatically Read Entry From Xml Config File
Jan 2, 2011i have a xml configuration file like below format.
<setting>
<web>
<mailid>xxxx</mailid>
</web>
<network>
<logid>sd</logid>
</network>
</setting>
i would like to programmatically read entry from xml config file which is same as asp.net webconfig file reading.
Asp.net - Web.config Entry Doesn't Work In A Specific Site
Sep 5, 2010in my web.config file i've added an entry:
<httpModules>
<add type="HDI.HTTPFilter" name="HTTPFilter"/>
but the server where i've placed the website on is not reading this entry but in other servers the site works perfectly.what the problem might be?
Error - .Net/web.config - "The Entry 'x' Has Already Been Entered" ?
Sep 26, 2010In ASP.Net when I see the error message "The entry 'x' has already been entered" I think that means a name (in this case 'x') is defined twice in Web.Config. Is that a reasonable summary of what causes that error or are there other ways it could be generated ? The 'x' in question doesn't appear twice in the web.config - any ideas of what else could be causing this error ?
View 4 RepliesC# - Passing Parameters With Conditionally?
Aug 3, 2010i have a dropdownlist with seven different optins like (date, subject, press, cia, media...) and user will select one of the item from the dropdownlist and click on search button to get the results.here is my repository class GetInquires method which accepts 7 parameters but it will pass only one prameters at a time to the storeproc and in case of Date (it will pass both from/to)
public List<Inquiry> GetInquiries(string fromDate, string toDate,
string subject, string press,
string cia, string media,
[code]...
Showing Icon Conditionally In C#?
Feb 11, 2010I am having trouble with my GridView in ASP.NET, which is listing a few rows of documents. Some of the rows (i.e. documents) are unpaid and need a shopping icon, which takes the clicker to another page completely. Other rows need no icon since they are paid.
This is what I have so far, although HyperLink is throwing an error saying that it cannot cast a HyperLinkField to a HyperLink. Is it better to create an object of the HyperLinkField through C# instead of ASP for example?
protected void getImages(Object src, GridViewRowEventArgs e)
{
if (e.Row.RowType == DataControlRowType.DataRow)
{
BusinessClasses.BusinessEntities.DocumentEntity dataRow =
[Code]....
AJAX :: How To Use ConfirmButtonExtender Conditionally
May 7, 2015I'm using ConfirmButtonExtender for confirmation. first I want to validate all the required fields then I want to show confirm message to the user. But I can see it every time. I want to use it conditional.
View 1 RepliesSQL Server :: DAL Doesn't Return The Return Value Of Stored Procedure?
Nov 8, 2010I have an update function in my data layer which is defined as:
public int UpdateRBTable(parameters ...) This calls a SQL Server Stored Procedure to perform an update function on the database.
The process does its job for updating the table. However, the stored procedure has a return value (which indicates how many rows were updated), but this return value is not returned to the application. The application always shows that a zero was returned from the stored procedure.
Removing Validation Attributes Conditionally?
Feb 28, 2011i have a panel which iam showing as pop up with few textbox controls with several validation controls and button on clicking which i am checking for validation now i want to add a checkbox on checking it it should disable some of the controls and remove the validation properties from them and on unchecking it apply the same i am able to make those controls disabled but still on clicking that button it is asking for validating those controls
on the click event of checkbox i am calling one javascript function and applying the disabled attribute to some of the controls
function disableOtherElements(e)
{
var id = e.checked;
if (id)
{
$('.dd').attr('disabled', true);
}
else
{
$('.dd').removeAttr('disabled');
}
}
dd is the class assigned to all the controls that i want to be disabled. what i have to do to remove the validation properties
Conditionally Render A Control In A Webpage?
Mar 10, 2010For example what if I am trying to hide a custom navigation control what can I place in another webcontrol to conditionally hide the label something like this
<mycontrol:hidethis id=mycontrol1 runat="server">
<mycontrol:mynavi runat="server"/>
</mycontrol:hidethis>
Conditionally Forward POST Values To Another Page
Sep 27, 2010let's say I have a page with a form on it where a user clicks Submit. This page checks the input fields when the user presses that button. If the fields contain mistakes, the appropriate fields' labels are turned red. That much is easy. Let's say if it's right, I want to POST that form to an external page written in another language. I cannot use any .NET conventions for transferring data, so it must be POST values. The postback attribute would seem to be for this, but I need the forwarding to be conditional. Eg: They're only posted to the external page IF my button handler determines that the values are good.
View 1 RepliesDisplaying Data Conditionally Within A User Control?
Feb 3, 2010Within an ASP.NET user control I have the line:
<div>Web: <a href="<%# Eval("Web") %>"><%# Eval("Web") %></a></div>
I'd like to change it so this HTML is only rendered if Web has a value.
I've tried wrapping String.IsNullOrEmpty(Eval("Web") as string) in server side script but Eval can only be used inside a "binding" tag.
What is the best way to do this?
MVC :: Setting Attributes Conditionally In Html.BeginForm
May 6, 2010I have a form that should have all html elements disabled unless a user id is present, indicating that a user has been loaded for editing. I've done this, which works:
[Code]....
This works, and all is good. I couldn't set an if statement up to control creation of the entire Html.BeginForm, which was a bit of a pain. When I tried, the View thought I was creating 2 form begin tags with only one end tag, even though it was inside a conditional statement. Whatever. The problem I now have is that I need to assign an id for the form to work with a validation plugin. I can't add the id = "someID" inside of the condition, because it won't be available when the user id is present, which completely defeats the purpose. I can't move the ternary condition to inside of the 'new' statement - I tried. I thought this would work:
[Code]....
But no dice. I get the following error: Type of conditional expression cannot be determined because there is no implicit conversion between 'AnonymousType#1' and 'AnonymousType#2'. What? Seriously? I'm not trying to convert anything. I'm either assigning a new html attributes section with one set of values or another set of values. Since I can't perform the conditional logic inside of the 'new' statement, I have to recreate the entire 'new' statement after the condition is tested, but this still doesn't work, as I get the aforementioned error. As a short-term fix, I'm going to just render an actual html form tag with the required data, but I'd like to know why it is that code executed/rendered within conditional statements doesn't understand that both true and false results aren't running, and also how to fix this issue while still using the Html.BeginForm helper.
Conditionally Make A DetailsView Field Read - Only?
Jan 26, 2011Say I have a DetailsView with a bunch of fields, and I want only certain kinds of users to edit a few of them. They're too few to split them into another DetailsView, so what I'm thinking is to find some way to only allow a user to edit them based on some code-behind logic, effectively making them read-only at will.
I feel it's important to mention that the fields are both TemplateFields, not normal BoundFields with ReadOnly properties. For some reason the required functions don't jump at me from reading the documentation. Oh and I need eveyone to see their specific values, I just want to restrict edit access to them.
Conditionally Disable A Detailsview Databound Field?
May 19, 2010I have an ASP.Net detailsview control. Its DataSourceId varies and I set it in Page_load accordingly... (based on LLBLgen sub types, but this is not too important)I guess this is a page lifecycle leaky abstraction I am not "getting".The problem is that I bind to fields that may or may no be there depending on the datasource...To "disable" a bound field under certain conditions I've tried wrapping the bound field in a panel which I set to visible or invisible in code-behind, but I still get the following error:Sys.WebForms.PageRequestManagerServerErrorException: DataBinding: Entity does not contain a property with the name 'FilePrefix'.I change the detaislview.datasourceid in pageload...might be too late in lifecycle.I don't want to bind to that field, as it doesn't exist for the new datasource, but it tries to do so none-the-less and I get the error.[Edited]: Code as requested...ASP, detailsview bound column:
<asp:TemplateField>
<ItemTemplate>
<asp:Panel ID="pnlNormalAdditionalFields" runat="server" Visible="false">
[code]...
Conditionally Set The Content Inside The Facebox Modal?
Jun 29, 2010I am working on a form where I need to conditionally set the content inside the facebox modal. I have created a sample code below where on click of each link I need to open a facebox modal(which is getting opened). Now in this modal I am having a textbox. I want the textbox to be filled automatically with the value equals to the text of anchor which opened the modal i.e On clicking the first hyperlink the textbox should be filled with "Field1" and on clicking the second the textbox should have "Field2" value. Here is the sample code:
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script>
[Code].....
Web Forms :: Hide Show TextBox Conditionally Using C#
May 13, 2013I have a page with a label and a textbox with two button edit and update. when the user clicks on edit the labels get hidden and text box appears. And when he clicks on update the textbox disappears and label appears I have achieved making the text box disappear and label appear but when I click on edit the textbox is not appearingĀ ....
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
public partial class Institute : System.Web.UI.Page {
[Code] ....
Can WebMethod Return An XmlDocument As Return Type
Jan 22, 2010Can my WebMethod return an XmlDocument as return type?
When I try to consume the web service I'm still not getting XML. It appears as though a reference to the method is being returned rather than say a string containing XML.
<WebMethod()> _
Public Function CustomerSearch(ByVal lastName As String, ByVal firstName As String, ByVal companyName As String, ByVal city As String, ByVal state As String, ByVal email As String) As XmlDocument
' Create XML doc
Dim doc As XmlDocument = New XmlDocument()
' some more code
Return doc
End Function
MVC :: How To Return 401 Error From A Method Return ActionResult
Sep 28, 2010how can i return 401 error from a method return ActionResult?
View 1 RepliesAssign A Value To the Methods Return Var before Return The Final Value?
Dec 2, 2010How can I assign a value to the methods return var BEFORE I return the final value?
Example:
public string Example()
{
[here I want to assign a value to the return var and continue this block until the end] = "TempStr"; [code].....