AJAX :: AutoCompleteExtender In Ascx Doesn't Works?
Jan 9, 2011
I've this set:
AutoCompleteExtender (4.1.4.0) in update panel in user control (ascx) and webservice under his ascx.vb and doesn't works.
So I've tested the same markup and webservice method in a simple aspx page and works, so I've some doubt:
- AutoCompleteExtender works in ascx file with webservice function under his code?
- AutoCompleteExtender works in an update panel?
I've always problem to create webservice method using wizard on the control, it return always: Cannot create page method GetCompletionList because no CodeBehind or CodeFile was found! - but I've CodeBehind file..sure!
View 1 Replies
Similar Messages:
Sep 5, 2010
I have created an autoextender & cannot seem to get it to work within my pages. So I'm missing something probably small yet important.
The webservice AutoComplete.asmx, when called by itself, does return data correctly.
The codebehind for AutoComplete.asmx is located in the App_Code folder.
AutoComplete.asmx and the page from which I am calling it are both located in the root folder.
AutoComplete.vb:
[Code]....
View 2 Replies
Aug 25, 2010
I am retrieving list of projects and project IDs using autocompleteextender. Is it possible to restrict the user to type further if the input doesn't retrieve any value from database. Though, I have found a solution by calling function through OnClientPopulated. But this function calls back the webservice "GetCompletionList" method. I don't want to recall one method two times. is there any other way?
View 1 Replies
Apr 16, 2010
I understand that probably this is not good forum for asking this question, but I'm a bit dissapointed, and I don't know where I can found answer to my question. Here is my problem. I've got a page that has dynamically loaded content with innerHTML like below:
[Code]....
Everything works fine .. since I wanted to have gif shown when page content is loading. But now I would like to after loading innerHTML content to execute javascript function to create pieChart of something. The problem is that I have to use document.getElementById()function, but it does not works with content loaded dynamically. I mean, Lets say that inside page loaded by innerHTML we've got a form which id="A" when instead pieChart() in above code i will use document.getElementById('A') it does not return my form. I've checked this in IE7 with no effect, ffox also does not seems to work. The only one browser that works at the moment is Chrome.
View 1 Replies
Jan 15, 2010
i have a problem with ToolkitScriptManager:
I have an asp web app contains ajaxtoolkit's controls. Everything is working fine on VS Development Server, but doesn't on IIS7 (win 2008).
The AjaxToolkit's scriptcombine sometimes is not working (resulted http 404 status code on browser). Maybe causes by long TSM_HiddenField query string on complex toolkit's controls.
the code:
[Code]....
View 1 Replies
May 27, 2010
I don't understand why ModalPopupExtender.show() doesn't works in AsyncFileUpload_UploadedComplete.
I seach through the forum, I'm not sure those asnwers are what I'm looking for.
here is my code
[Code]....
Code below is working on the same page
[Code]....
View 3 Replies
Oct 19, 2010
As the title of this post already mentioned, I'm using a modal popup window to edit rows in the gridview. One column in the gridview contains an URL code. When I fire the edit button a popup opens and show the URL in a textbox in this format: [URL]
When I am using the Server.HTMLDecode function, the modal popup doesn't close anymore.
I am using the following code:
[Code]....
The funny thing is, when I change it to: txtURL.Text = row.Cells[3].Text; then I can close the modal popup, but unfortunately it is not decoded.
View 3 Replies
Jan 15, 2011
I've followed the standard example of in
http://www.asp.net/ajax/ajaxcontroltoolkit/samples/autocomplete/autocomplete.aspx which demonstrates using AutoCompleteExtender. Everything works fine but the auto-complete appears with about 20 pixel distance below the bottom of its target control. I mean they are not glued to each other as they should be. I've not changed anything and also I've not applied any special styling using CSS or anything else. why this ugly distance is formed while the control is rendered.
View 1 Replies
Feb 3, 2011
I am using Ajax Validator call out extender to validate a web form. The error messages are displayed as expected. But I am able to save the form with data that should not have been entered. For ex: for a number field, I type in "sdsd" and the ajax control displays a pop up displaying the error message "Numbers only allowed"..
but at the same time, I can click on the submit button with the text in the number field... at which time, the web page displays error as I am trying to insert a text in a data type int field. I either have to clear the field on pop up error display or not let the user click submit when ajax validator is active. whats the best way?
View 2 Replies
Aug 21, 2010
Not sure which category to put this question in, so I will put it in here. Just to give you an idea of the layout of my solution, I have the main project, along with 2 class libraries, BLL and DAL. (Business Logic Layer and Data Access Layer) The BLL refers to the DAL and the main project refers to the BLL. I had a test website and the code worked fine, but the same code will not work on the real project. The only difference is that in the test project, the code was on an aspx code behind, whereas in the real project, it is an ascx code behind (Web User Control
)
The code is:
[Code]....
Dim connectionString As String = ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString").ConnectionString
View 5 Replies
Nov 3, 2010
I'm trying to make some calls to a WebService I did exactly what is described in this article [URL] Looking at the console of firebug I could see that my function was executed and returned the expected data, but my callback functions (OnComplete, OnError, OnTimeOut) are never executed. Whats wrong? Here is the code (same code of the article)
Service.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.Services;
[WebService(Namespace = "[URL]")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
[System.Web.Script.Services.ScriptService()]
public class Service : System.Web.Services.WebService
{
public Service () {
//Uncomment the following line if using designed components
//InitializeComponent();
}
[WebMethod]
public string HelloWorld(string strNoOfData)
{
return strNoOfData;
}
}
Default.aspx
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "[URL]">
<html xmlns="[URL]">
<head runat="server">
<title></title>
<script type="text/javascript" language="javascript">
function CallService() {
Service.HelloWorld(document.getElementById('Textbox1').value,
OnComplete, OnError, OnTimeOut);
}
function OnComplete(Text) {
alert(Text);
}
function OnTimeOut(arg) {
alert("timeOut has occured");
}
function OnError(arg) {
alert("error has occured: " + arg._message);
}
</script>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:ScriptManager ID="ScriptManager1" runat="server">
<Services>
<asp:ServiceReference Path="~/Service.asmx" />
</Services>
</asp:ScriptManager>
<asp:UpdatePanel ID="UpdatePanel1" UpdateMode="Conditional" runat="server">
<ContentTemplate>
<fieldset>
<asp:TextBox ID="Textbox1" runat="server"></asp:TextBox>
<br />
<asp:Button ID="Button1" runat="server" Text="Call Service" OnClientClick="CallService()" />
</fieldset>
</ContentTemplate>
</asp:UpdatePanel>
</div>
</form>
</body>
</html>
View 2 Replies
Jan 23, 2011
I don't understand because the click event doesn't fire in ascx control nested in masterpage.
The scenario is:
In Page Pre-Init i load a particular MasterPage, one of these have a ascx control with LogOff Button.
The ascx is showed correctly but doesn't fire the button click event that allow me to logoff.
I haven't load the control programmatically but directly in masterpage:
[Code]....
[Code]....
View 4 Replies
Jul 30, 2010
I have a form in aASP User Control (.ascx) file. Maxlength does not work for the multiline textboxe hence it is generated as a textarea, which has no support for this attribute. I could maybe use some asp validation, to prevent submission of too much text, but I want to prevent it to be possible to even enter too many characters, just like is possible for single line textboxes... I don't know if the control has any onload event that I could use to add attributes to the textbox from code behind and and combined with javascript fix this or anything..
View 1 Replies
Aug 2, 2010
I have an ASCX component that has a lot of javascript declared in a script tag in the ascx itself. I can set breakpoints, and the debugger stops as it should, but the text that is highlighted in the debugger as the "current line" is nowhere near the actual javascript (it is much higher in the rendered file than it should be). I can "wing it" for one or two lines with the real code side-by-side with the "false" line of execution, but I lose all the hover abilities and everything else that makes javascript debugging useful.
I have tried putting the script at the top of my ascx file, but to no avail. I've tried not setting a breakpoint until the entire page is rendered, so that I have to scroll all the way to where the actual lines of code are, and the debugger still stops somewhere way above it.
View 1 Replies
Apr 7, 2010
This is the grid
<asp:GridView ID="annonceView" runat="server" AutoGenerateColumns="False" DataKeyNames="Id" DataSourceID="dataSourceAnnoncer">
<Columns>
<asp:BoundField DataField="Productname" HeaderText="Productname" />
<asp:buttonfield buttontype="Link" commandname="Delete" text="Delete"/>
<asp:TemplateField HeaderText="Administration">
<ItemTemplate>
<asp:LinkButton ID="lnkBtnDelete" runat="server" Text="Delete" CausesValidation="False" CommandName="Delete" OnClientClick="return confirm('Delete?')" />
/ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
<asp:LinqDataSource ID="dataSourceAnnoncer" runat="server" ContextTypeName="Namespcae.TheContext"
EnableDelete="True" TableName="Annoncer">
</asp:LinqDataSource>
Clicking the buttonfield deletes the record just fine. Clicking the LinkButton doesn't work. I get a postback and the grid is shown as empty and no record is deleted. Seems like an empty databinding. I have tried to create a custom OnClick, OnCommand event for the LinkButton, but neither are fired. The OnRowCommand isn't fired either.
I don't manually DataBind in the codebehind.
View 2 Replies
Feb 14, 2011
I have a application that connects to a remote sql server. I am able to create users and they are stored in the DB. Then I can go to the login page and login. But after a while, I am unable to log in and it just sits at the login page. The user is still in the DB
<configuration>
<connectionStrings>
<add name="LoginSQL" providerName="System.Data.SqlClient"
[code]...
View 1 Replies
Sep 22, 2010
I have sitemap which looks like this:
<?xml version="1.0" encoding="utf-8" ?>
<siteMap xmlns="http://schemas.microsoft.com/AspNet/SiteMap-File-1.0" >
<siteMapNode url="~/default.aspx" title="Prva stran" roles="*" description="Shema ISEF">
<siteMapNode roles="2" title="Analize" id="Analize" description="" >
<siteMapNode url="~/karneki1.aspx" title="Karneki1" description="" />
<siteMapNode url="~/karneki2.aspx" title="Karneki2" description="" />
</siteMapNode>
</siteMapNode>
</siteMap>
if I set roles in a siteMapNode with title "Analiza" it works fine, the link is not shown in the navigation... but if I set roles on any of "karneki" siteMapNode the links are still visible...
Is it even posible to restrict access to lower links based on user role?
View 1 Replies
Apr 8, 2010
I have made a Website in Vs2008 on XP.Did the Url rewriting for this website by using Intelligencia.UrlRewriter.dll.It works fine locally.in my webconfing i did it like this ->
<rewriter>
<rewrite url="~/MstDealer/(.+).aspx" to="~/MstDealer.aspx?nTableKey=$1"/> <rewriter>
View 9 Replies
Mar 22, 2010
i have a gridview that binds data after changes were made (delete,update..) and it's all done with the c# method DataBind() and i don't know why FF shows the changes but in IE8 the grid remains the same and only if i navigate back and refresh, then i see the changes.
View 1 Replies
Mar 12, 2010
I'm making a website in ASP.NET 4.0 where I make use of the RequiredFieldValidator control to validate a wizardstep.It works perfectly with Javascript enabled, but when I turn it off (in my Firefox) it just goes to the next step.We don't do a Page.IsValid check, but we don't do much on the "next button clicked" event either.Certainly not something that is forcing it to go to the next step.
View 15 Replies
Feb 1, 2011
Have a project that was created in Visual Studio 2008 and deployed to a 64-bit Windows 2003 server. This application references a 32-bit Interop.ActiveDs.dll. The applications were originally compiled for 'Any CPU', however, explicitly compiling as 'x86' doesn't solve the problem. The project targets the 3.5 framework.
The server is running IIS 6.0 in 64-bit mode. When we deploy the version compiled in Visual Studio 2008, the app runs perfectly fine; all pages show up. In retrospect, this is actually surprising.We migrated the application to Visual Studio 2010 (we did not change the targeted framework) and redeployed. Now we get a BadImageFormatException loading Interop.ActiveDs.dll. Which actually makes more sense than the 2008 version running.To solve the problem, we set Enable32bitAppOnWin64 to true and ran aspnet_regiis.exe -i from the 32-bit folder of the 2.0 framework (as per various instructions on the web). In IIS, web service extensions, there were two versions of ASP.NET 2.0, one for 32-bit and one for 64-bit. We prohibited the 64-bit version, restarted IIS, and launched the website.
What we expected: The app to run as 32-bit, load the interop, and display
What we got: "Service Unavailable"All other web pages that were previously working displayed the same message, as did the Visual Studio 2008 version.The support page here describes the problem exactly, but tells us to do exactly what we did to resolve the problem (enable 32-bit mode).We've rolled back to 64-bit mode in IIS and deployed the Visual Studio 2008 version for now, but we really need to figure out how to make this app run and load the interop (there are also 32-bit Oracle DLLs that are referenced)Two questions:Why does the Visual Studio 2008 version work at all??
How do we get the Visual Studio 2010
View 1 Replies
Aug 10, 2010
I have to build a few ascx partial views in my MVC applications to encapsulate re-usable functionalities as well as archive SOR and SOC. However, I encountered challenge how to encapsulate the business logic that drives MVC ascx views.In webforms, the code behind of an ASCX control can handle a button click event and browser still shows the same page with only one postback. How can I archive the same thing in MVC? When ~/Address/Edit/2 includes an ascx partial view with a button on it that calls another MVC action - let's say ~/ShareController/CommonAction - what is the best way for the CmmonAction to return to the very same view that includes the ascx file?Perhaps I am missing a common pattern in MVC web development?
View 5 Replies
Sep 2, 2010
In the tutorial for autocomplete text box for static page method in c# the following lines of code is given. When i use it my website using c# it gives error 'invalid term "in" showing in line 7.
[System.Web.Services.WebMethodAttribute(), System.Web.Script.Services.ScriptMethodAttribute()]
public static string[] GetCompletionList(string prefixText, int count, string contextKey) {
// Create array of movies string[] movies = {"Star Wars", "Star Trek", "Superman", "Memento", "Shrek", "Shrek II"};
// Return matching movies return (from m in movies where m.StartsWith(prefixText,StringComparison.CurrentCultureIgnoreCase) select m).Take(count).ToArray();
}
View 2 Replies
Apr 14, 2010
I am having difficulties how to construct my question, but if I have to put it simply the situation is that I have categories of products. I have an aspx with a repeater on the left that lists the categories. And I want the products to be listed on the right. Category number is variable so I made an ascx with a DataList in it. When I try to do foreach category, ascx = new ascx(); then the DataList within this ascx control is null.
ps: what I want to do is to preload all the products (thre is not much) and hide the divs and fadein fadeout them using jQuery when a category div is clicked.
rightnow it is using jQuery.load(); and I don't like how the images load, cuz they download from top to bottom. Progressive gifs alsdo not an option. site demo is here [URL]
View 1 Replies
Aug 20, 2010
I am using autocompleteextender to receive list of projects. Is there any way that, given list of projects can hold a hidden values like a dropdownlist? I need project ID as hidden value...so that when I select a project from the list, I can retrieve the ID using C#/ASP.Net.
View 2 Replies
