AJAX :: Validator Call Out Works But Doesn't Stop Insert Or Update Form
Feb 3, 2011
I am using Ajax Validator call out extender to validate a web form. The error messages are displayed as expected. But I am able to save the form with data that should not have been entered. For ex: for a number field, I type in "sdsd" and the ajax control displays a pop up displaying the error message "Numbers only allowed"..
but at the same time, I can click on the submit button with the text in the number field... at which time, the web page displays error as I am trying to insert a text in a data type int field. I either have to clear the field on pop up error display or not let the user click submit when ajax validator is active. whats the best way?
I have a windows service that calls a class library. The call to the Class library from the windows form application works fine. But from the service I do get the desired output. The event viewer does not report any error. The service was working fine until the recently when the server got remastered. Any suggestions what might have gone wrong?
I'm using SqlDataSource and at the point of adding a record, I've called SqlDataSource_UploadNewsLetter_Inserting. In here, I'm testing a value, and if it's true, I need to stop the insert from taking place. But how can I stop the database insert at this point?
I have a detailsview which has a button for insert and edit depending on mode plus a cancel button. What I am looking to do, is to use the cancel button to stop any insert or update to the database if clicked.
I understand that probably this is not good forum for asking this question, but I'm a bit dissapointed, and I don't know where I can found answer to my question. Here is my problem. I've got a page that has dynamically loaded content with innerHTML like below:
[Code]....
Everything works fine .. since I wanted to have gif shown when page content is loading. But now I would like to after loading innerHTML content to execute javascript function to create pieChart of something. The problem is that I have to use document.getElementById()function, but it does not works with content loaded dynamically. I mean, Lets say that inside page loaded by innerHTML we've got a form which id="A" when instead pieChart() in above code i will use document.getElementById('A') it does not return my form. I've checked this in IE7 with no effect, ffox also does not seems to work. The only one browser that works at the moment is Chrome.
AutoCompleteExtender (4.1.4.0) in update panel in user control (ascx) and webservice under his ascx.vb and doesn't works.
So I've tested the same markup and webservice method in a simple aspx page and works, so I've some doubt:
- AutoCompleteExtender works in ascx file with webservice function under his code?
- AutoCompleteExtender works in an update panel?
I've always problem to create webservice method using wizard on the control, it return always: Cannot create page method GetCompletionList because no CodeBehind or CodeFile was found! - but I've CodeBehind file..sure!
I have an asp web app contains ajaxtoolkit's controls. Everything is working fine on VS Development Server, but doesn't on IIS7 (win 2008).
The AjaxToolkit's scriptcombine sometimes is not working (resulted http 404 status code on browser). Maybe causes by long TSM_HiddenField query string on complex toolkit's controls.
I have a typical gridview/formview master control setup. When I try to update or insert I don't get any errors but it also doesn't work. When I try to insert data all I get are null values and when I update, none of the values are updated. The formview looks like its working, but just doesn't. The primary key is an identity and it auto-increments by one.
What could potentially stop an AJAX call from working on the host server, when it works fine on the local host? I tried returning an error from the AJAX call, but all I get is 'undefined'. I don't think the actual page method is being called since no information is added in my log (and I've explicitly added a call).
I am using a compare validator control and also a ajax validatorcallout extender control for data check on a field.
Both of them work well...but only the ajax call out extender pop up error message should display ... right now I have both of them displaying.. it defeats the purpose of having calloutextender, if I am displaying the comparevalidatror message anyway on the webpage.
How do make it so that only the pop up calloutextender ajax is triggered and not the comparevalidator error message.
I've a Detailsview that contains an updatepanel.A button is pressed within the panel and a window is displayed containing a gridview list.The user selects an item from the list, the window closes and the selected gridview item is placed in "tbResourceID" My problem however comes when the user goes to click insert the validator doesn't fire. I'm guessing this is something to do with the updatepanel isolating the validator.... my code is shown below!
As the title of this post already mentioned, I'm using a modal popup window to edit rows in the gridview. One column in the gridview contains an URL code. When I fire the edit button a popup opens and show the URL in a textbox in this format: [URL]
When I am using the Server.HTMLDecode function, the modal popup doesn't close anymore.
I am using the following code:
[Code]....
The funny thing is, when I change it to: txtURL.Text = row.Cells[3].Text; then I can close the modal popup, but unfortunately it is not decoded.
We have two update panels on our webpage. Now first update panel is having button cancel. While second update panel is having a file upload control.
Now if the user uploads a file that is going to upload in about 2 mins, and in between, say after 30 seconds the user clicks the cancel button, the upload taking place in update panel 2 should stop.
The code which shown above where the problem is javascript have not function which the certain command trigger and involved for the outer javascript which called from the ajax's update panel web control.
How to allow the javascript can be run where it's call from inner update panel, for now its will cause the errors one the update panel's web control call the outside JS/countdown.js file as well....
I've exempted the irrelevant bits of code. Essentially, I am trying to change the URL of an image control inside of an update panel inside of a custom user control from a function called inside an update panel from my main page. Using UpdatePanel.Update() isn't working: I end up waiting for the next full page POST to occur before all the updates I make to CustomControl from buttons within the main page's update panel are visible. I verified that Update() was being called via the debugger: there are no issues in that department.
Here, you can see Custom Control and the Button declared. The button is in an update panel to avoid giving a full POST and causing the whole page to reload.
This control stores images within their own seperate update panels because rerendering the images is very slow (it requires processing arrays of millions of datapoints) and the user only ever needs to modify one image at a time. I'm using Image1 as an example.
I have two update panels on my page. One of them contains a list of users which is retrieved from the database. When I click a search button (which is outside of the update panel) the users are retrieved from SQL server and displayed in a repeater inside this update panel. Each of the users has a button next to them to 'Edit'. The seconds update panel contains all of the fields for a user. Textboxes, checkboxes and what not.
My plan is to click the search button as you normally would, and then when you click the 'Edit' button on a user, the second update panel fills with their details. This works except that when I do this the first update panel is updated again and because it hasn't searched for any users it goes blank.
So what I did was set both the update panels to conditional, and then call the first panels update at the end of the search code in the search button click event. So that worked, but now the repeater inside the first update panel is not firing the Item_Command event, so I can't get the details for a user. How can I resolve this so that the repeater button works inside the conditional update panel?
I have a simple validator that should check if the the date format is incorrect. I am doing testing and enter 2/14/201... which gets passed through my validator as 2/14/0201. How do I prevent this and jump to e.IsValid = false;?
I've added routes to my asp.net 4 website so that, for example the page: "~/Main/About/Careers.aspx" is mapped to the url: [URL] I'm using jquery to make an ajax call and it simply does not work after I've added the routing, I used the following code, and it remains stuck on the spinner image:
For some reaon the black outline isn't appearing around my Validator Callout Extender's callout box. I don't have a css class set. It should display a yellow callout with a black outline. Like on the sample page:
[URL]
It shows the yellow call out with the black outline around the pointed part but not the main box.
I need to check if ANY of the checkboxes are selected from the gridview.. if atleast 1 is selected, then continue, if none are checked then return the error message so they can make a selection, below is what i have.. if i have all checkboxes checked, then everything works, but if i only have 1 then it doesnt work..
I am trying to learn the ASP.Net AJAX and as project I decided to do a basic number guessing game. It works fine the first time a guess is submited but after the second time the number of guesses made does not update properly and I can not figure out why.
I have problem when i use UpdatePanel in ContentPage. In Updatepanel, I have DataGrid. Outside, I have a textbox and Button.
When i press button, I want to insert message in texttbox to Database and Select from Database for Showing in DataGrid (includes all message in past)
My MasterPage:
<ScriptManager> <ContentPlaceHolder>
My ContentPage
<div> Have a textbox and button <updatePanel> Have Datagrid <%@ Page Title="" Language="C#" MasterPageFile="~/MasterPage.Master" AutoEventWireup="true" CodeBehind="commentForm1.aspx.cs" Inherits="ChatApplication.commentForm1" %>
I have a simple table with 5 text boxes, above that i have a dropdown where you make a selection, if there are any records of associated with the selection, then i display in the fields..
A while back this was working, you could make a selection and the fields were within a update panel and they were populated. But im revisiting the pages to make some updates and changes and noticing that the page no longer populates the fields when a selection is made..
Is there anyway to debug the updatepanel? I put a breakpoint in my selectedindexchanged event and my Db call is returning values and the textboxes .TEXT values are being assigned the right values in the code behind, but the fields never show up..
This page hasnt been touched since it was wworking last, so need to see how i can test / debug the update panel to determine what coudl be causing it..
