I am begier in AJAX.
I taken one Accordian Cotrol.
In side that I have taken Accordion Pen Control.
Inside that I taken a button.
But when I click the buton page is get post back but Button Click event is not getting called.
how should I do so the button click event is get called?
Button click event from inside the accordion pane is not firing. Accordion pane contains tab container inside one of its panes (5th pane) to read data from user and to save that data into database. I have used a button to save data when user click on that button. For this button i have written a click event in code behind.
this is my click event
<asp:Button
ID="Save"
runat="server"
Text="Save"
OnClick="Save_Click"/>
and code behind code
protected
void Save_Click(Object sender,
EventArgs e)
{
//my code
}
for this page AutoEventWireup="true"
i have one master page and the ContentPlaceHolder that are inside UpdatePanel. I have too, buttons in master page thad feed the ContentPlaceHolder e update the UpdatePanel. When i click on any master page button, it load one UserControl inside ContentPlaceHolder. But inside one of this UserControls have a Button, that when i click on, it dont fire the click event.
MasterPage code:
[Code]....
Code that load UserControl inside ContentPlaceHolder
[Code]....
Code that contains the button that dont fire:
[Code]....
Obs: I tried sign dynamically the button, but dont works. And when i click on button, the unload method of UserControl begin called.
a problem with firing click event when asp:button control is click on IE8. Its properly postedback but when i click button in IE8, it does'nt do any thing. After review on mouseover on button the the following type link showing on button pagename.aspx?vid=18 on next click it incremented pagename.aspx?vid=18&vid=18 and so on. How can i fix button problem in IE8.
View 6 RepliesI have a user control that displays some database records when I first hit the page. When I click the submit button the page load event fires again, loading the user control again. Then the button click event fires inserting a new row in the database which is not shown on the page because the user control already did its stuff. If I could get the user control to do its stuff after the button click event I could then see the newly inserted row. I can do this by pulling the code out of the button click event and sticking it in the page load event. However, I think that would be bad code flow. How can I get the user control to do its stuff after the button click event has fired?
View 7 Replieshow to trigger a accordion pane with a button server control click ?
View 2 RepliesI have one Button (Refresh Button), One ComboBox (containing DEV and UAT as its items) and a GridView on my asp page.
I am filling up my Grid with values from database on the ComboBox's 'TextChanged' event and Buttons's 'Click' event.
First time when page is loaded, there is no information in the grid, but when i choose DEV/UAT from the ComboBox 'TextChanged' event is fired, the grid is filled with the relevant data. That is what i want.
When i click the Refresh Button to refresh the data again, first comboBox's 'TextChanged' event and then 'btn_Click' event is fired.
I want then when a button id pressed only 'Click' event to be fired and not the ComboBox's 'TextChanged' event.
i have written an button click event in js file but the event wasnt fired the code seems below
$("#btnSearch").click(function () {
debugger; alert("search button event fired");
$("#ctl00_MaintenanceContentHolder_btnSearch").click(function
ugger; alert("searchbutton event fired");
How can I set Focus to a TextBox while Button click event is fired using Default Button when enter key is pressed. Here is my Page and code.
<%@ Page Title="" Language="C#" MasterPageFile="~/mpChat.master" AutoEventWireup="true" CodeFile="FocusTest.aspx.cs" Inherits="FocusTest" %>
<asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Panel ID="Panel1" runat="server" DefaultButton="Button1">
<asp:TextBox ID="TextBox1" runat="server">
</asp:TextBox>
<asp:Button ID="Button1"
runat="server" Text="Button" onclick="Button1_Click" />
</asp:Panel>
</ContentTemplate>
</asp:UpdatePanel>
</asp:Content>
using System;
public partial class FocusTest : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
TextBox1.Focus();
}
protected void Button1_Click(object sender, EventArgs e)
{
TextBox1.Text = "";
TextBox1.Focus();
}
}
i am using jquery flexi gride in web page and it is working fine .But now the problem is ocured when i click button to call server side event.I am not able to find out. My button is as fallows and i am
[Code]....
In asp.net web form the button click event is not getting fired, the following code is the cause for this issue.
function Showsearch()
{
document.writeln("<form id='s'>");
document.writeln("</form>");
}
explaination for the cause of this issue. Source code..
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm2.aspx.cs" Inherits="Samples.WebForm2" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"[URL]
<html xmlns="[URL]
<head runat="server">
<title>Untitled Page</title>
<script language="javascript">
function Showsearch()
{
document.writeln("<form id='s'>");
document.writeln("</form>");
}
</script>
</head>
<body>
<form id="form1" runat="server">
<div id="as">
<script>javascript:Showsearch();</script>
</div>
<div>
<asp:button ID="Button1" runat="server" text="Button" onclick="Button1_Click" />
</div>
<asp:Label ID="Label1" runat="server" Text="Label"></asp:Label>
<asp:Button ID="Button2" runat="server" Text="Button" />
</form>
</body>
</html>
My page contains a button [Button1].I've dynamically created a new button [Button2] in the Button1_Click event and and assigned event handler also.But when clicking on Button2, Button2_Click event is not fired.I think its because the page looses dynamically created Button2 after post back, since it is created in Button1_Click event.Is there any way to maintain Button2 on page and raise Button2_Click event ?
View 5 RepliesI have update panel in which i have a label and a textbox and a button
I havwe a Radiobutton list which i am using In the asynchoronous postback trigger of the update panel.
In the Control Id of the trigger I have passed Radiobutton List Id and in the event name I am passing SelectedIndexChanged
But when I click the button no event is firing rest all is working fine.
After deploying application on web server sometime button click event don't get fired
View 3 RepliesImageButton inside Datalist inside update panel is not firing in my asp.net web page. what should i proceed??
View 1 RepliesI got a strange issue with Gridview in ModalPopupExtender. The OnRowCommand event of the GridView control does not get fired on the first clicking on the button. It will get fired on and after the second clicking.
Code is below.
I got a little problem that is... well... quite frustrating. I have dynamically created a button, outside the UpdatePanel, just like that:
[Code]....
This is working... no problem with that... The problem is this button, that I add into an UpdatePanel:
[Code]....
I just can't catch the click event of the button.
I have an accordion control with header and content templates. I am binding this control at pageload but, due to the page load time i want to bind the headers only to the accordion in the pageload and when the user click on the header after pageload i want to bind the content to the accordion. I have succeded to add an event to the header but when i clicked on the header page postback is happening even the entire accordion in the updatepanel. Here is the code to ref.
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Accordion ID="Accordion1" runat="server" Width="800px">
<HeaderTemplate>
<asp:LinkButton ID="LinkButton1" runat="server" Width="97%" CommandName='<%#Eval("name")%>' OnCommand="getdata"><%#Eval("name")%>
<asp:Label ID="Label1" runat="server" Text='<%#Eval("name")%>'></asp:Label>
</asp:LinkButton>
</HeaderTemplate>
<ContentTemplate>
<asp:Label ID="Label2" runat="server" Text=""></asp:Label>
</ContentTemplate>
</asp:Accordion>
</ContentTemplate>
</asp:UpdatePanel>
The getdata method is executing when i clicked on the headerhere is the cs code
public partial class WebForm1 : System.Web.UI.Page
{
string[] names = { "Brand", "Success", "Navigation" };
int[] value = { 10, 20, 30 };
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
DataTable dt = new DataTable();
DataColumn dc1 = new DataColumn("name");
DataColumn dc2 = new DataColumn("value");
dt.Columns.Add(dc1);
dt.Columns.Add(dc2);
for (int i = 0; i < 3; i++)
{
DataRow dr = dt.NewRow();
dr["name"] = names[i].ToString();
dr["value"] = value[i].ToString();
dt.Rows.Add(dr);
}
Accordion1.DataSource = dt.DefaultView;
Accordion1.DataBind();
}
}
protected void getdata(object sender, CommandEventArgs e)
{
if (e.CommandName == "Brand")
{
((Label)Accordion1.Panes[0].FindControl("Label2")).Text = value[0].ToString();
}
if (e.CommandName == "Success")
{
((Label)Accordion1.Panes[1].FindControl("Label2")).Text = value[1].ToString();
}
if (e.CommandName == "Navigation")
{
((Label)Accordion1.Panes[2].FindControl("Label2")).Text = value[2].ToString();
}
}
}
I need to eliminate the postback from this page. I tried it only accordion on the page then it is working fine(with out postback) but when integrated it with the other code in which again am having some ajax functionality then the post back is occurring.
I am creating nested accordion using the object model and have created buttons in the inner accordion's accordion pane. The buttons look great but issue is that the buttons does not fire thier click event. They just do the postback of the page and ignore the event.
I want to show a pop-upextender on the pre_init event but all my panes are added dynamically so it does not give any rows.
My code
[Code]....
how i can find this button inside accordion?
<cc1:Accordion ID="Accordion1" runat="server" AutoSize="Fill"
BorderColor="#CCCCCC" BorderWidth="1px" EnableTheming="True"
FadeTransitions="True" Font-Bold="True"
Font-Size="Small" Width="130px" Height="300px"
style="margin-right: 23px; margin-bottom: 217px;"
RequireOpenedPane="False" EnableViewState="False">
[Code]....
I have a page with some search fields, and a grid that displays the search results after clicking the 'search' button.I've placed the search fields in one accordion pane and the result grid in a second pane and the accordion works.But what I'm trying to achieve is that after clicking the search button, the results pane becomes the active pane so that you see only the results and not the search fields.But somehow the SelectedIndex is completely ignored. If I set the index for example to 25 still nothing happens, even though I only have 2 panes.I've also tried to use javascript, but I keep getting null reference errors.The search button is wrapped in an UpdatePanel, and the results grid is wrapped in another UpdatePanel, I think that may cause the problem, because if I created a page with an accordion and 2 panes, the second pane becomes active after clicking on a button
in pane1 using SelectIndex = 1;
[code]...
I have a reorder list with edit and delete buttons.
i need to click twice to get the event fired.
As per my need I want to dynamically load accordion pane and inside that I want to load an ascx control. I am attaching my code for reference. But when I run my code it does not create separate pane.
Sample Code part:
protected void Button1_Click(object sender, EventArgs e)
[Code]....
A breakpoint is set on FillForm() and this method is called two times but I can't explain myself why this happens. I have client side javascript code, when the form is being send, the onsubmit method is also called twice... Where do I have to search?! Is it a (known) bug? Think I could get it to work with this Thread: [URL] But why is the event fired within the onblur-event when it's fired anyway??
I am sending you the code. It Has two PArts First is CLIENT SECTION and Anpother is STATION Section
1) CLIENT SECTION : It has a dropdownlist binded to SQLDataSource and with this it has an imagebutton bAddClient
bAddClient will open the ModalPopup which will ask user to Add new client. And After Adding the New client when User
will close the ModalPopup MY DropDownList is not getting Populated with the New Client. I have Used UpdatePanels Also
2) STATION SECTION : It has a DropDownList, an Image BUtton , And Grid View. In Grid View it shows station details
On particular client selcted above.
I have given the delete station command on deleting the station that particular entry doesnot goes away.
It Should not be visible after it get deleted
Now when i click on imagebutton a modalpopup will open.
Now In modalpopup i have given dropdownlist , image button(to add new station), Some station Info and save button
Now when i click on dropdownlist it used to close the modalpopup then i seet the autopostback = false. Then it works fine. Is it correct way?
Now when i click on imagebutton it asks user to add new station with a textbox , save station button. When users click on savestation button then it adds station to the DB and it should update the dropDownList of ModalPoup without closing it.
But when I am clicking on imagebutton it is closing the modalpoup.
And When user clicks on ModalPoup SSave Button in end it should update GridView of STATAION SECTION too.
<%-- ************** CLIENT SECTION START HERE*******************--%>
<p class="heading">CLIENTS</p>
<br />
<asp:ScriptManager ID="smClientMgmt" runat="server" />
<asp:UpdatePanel ID="upCMClientInfo" ChildrenAsTriggers = "true" UpdateMode="Conditional" runat ="server" >
<ContentTemplate>
[Code] ....