AJAX :: How To Update Progress Control Not Working Properly
Apr 6, 2010
I am experiencing problems with the Ajax Update Progress control.
My application is about writing some comments and uploading a picture and when the picture is the process of being uploaded I would like to show an update progress. This is my code:
[Code]....
- when the button is clicked I see the update progress message for a couple of seconds but the picture and the text are not uploaded- I need to click the button again in order to see my picture and text uploaded but in this instance I don't see the update progress message.
I developed my application form in aspx page its such a huge form(6000 lines), I used update progress there for that updatepanel, But i cant able to see the update progress icon when i rendering the page.
I have a wierd issue with the update progress control in ie8. I have a modal popup that loads a pdf in an iframe, then i have a button click that navigates away from the pdf and shows a form in the same modal. All this is wrapped in an update panel, which i have an update progress control associated with. The control shows correctly in ie7, firefox, safari, and chrome. But in ie8 when the async post back is complete the progress indicator does not hide, until I click on the screen or scroll the page, then it hides and the form shows.
I have one button on my page. On click of this I need to run four methods parallely in four saperate thead and need to show the progress bar for each method. Also need to update the label controls form those threaded methods.
Also I need to user Update panel of AJAX control tool kit to avoid post back to user.
I have used the read pool for that. When I remove the update panel the code works fine and update four labels but when I put the update panel it is not updating the labels.
I have a user control, that has an update panel and update progress control in it.
I use this user control in more than 1 location on the same page.... problem is, when ucA posts back, I see the update progress control for both ucA and ucB. I assume this is because it is a user control and the update panel and progress are named the same?
Either way - how do I make it so that the update progress only displays for the proper user control?
I have a question about using the update progress control. I gasp the basic use of the control - basically you can associate it to an update panel, and whenever that update panel is updated, this update progress control is displayed on the page.
I do have a couple of questions though:
1. My project uses a lot of user controls. I would like to display an update progress control that "disables" or "whitewashes" the contents of the user control - which for this example - lets say it is a gridview and a drop down list - when the user changes the selected value of the drop down list, the grid rebinds. I want the update progress control to shadow or whitewash only that grid while it rebinds. The rest of the page should be accessible.
2. I have certain pages that I want to be locked while an update panel is updating - in otherwords, the entire page is whitewashed or shadowed out and a ajax loader gif is shown. I currently have this working with an update progress control that does not have the AssociatedUpdatePanelID property set. This appears to fire every time any update panel is updated. If I were to have one of the user controls that has an update progress control that only applies to itself - and those update panels update - which update progress would be shown?
I am using a master page which has a table that is used for layout. In one of the cells I have a Accordion control which holds links in each panel to navigate to the various pages. I have a few pages that take some time to load so I was trying to use the update panel progress control, however it seems that you cannot use a hyperlink or a link button as triggers for the update panel or if you can you cannot if it is in an accordion control.
So I am seeking advice on how to show a loading message when the pages load in the content panes.
I have a update panel and Update progress inside an Wizard control's Wizard Step.
But the update progress is not shown when i click on the 'Finish' (in which the ajax controls are placed) button inside the Wizard step
Note : I am using the FinishNavigationTemplate to define the 'Finish button and OnClick Event of the Button, i am setting the Updateprogress control location using DomElement
Ajax calendar control not working properly with content place holder of Master Page.Most of time Calender Control hides when mouseover with out changing date in content place holder of Master Page.same code works in normal aspx pages.
I'm new to the world of Update Panels and i'm having a hard time figuring out how to use them properly.
I have a form that has a table(TABLE1)...and inside TABLE1 i am linking to a sql data source....at the bottom of the table i have a 'Add' button.
When the user clicks the add button...a modal popup appears (POPUP1) and inside the POPUP1 the user can click a link that can add a user...when the link button is clicked...a panel within POPUP1 is set to visible = true.
I have one update panel around the whole table and the add button...when i click add and then click the link to add a user....the modal popup disappears.
I'm working on a simple demo project so that I can learn some things about ASP.NET's AJAX capabilities. My problem is that I can't seem to get an UpdatePanel to work properly with a CheckBox inside of it. Here is the markup I'm using in my .aspx file:
I have update panel , in update panel i have one button control which exposes onlientClick event ( it dosent have click event to do postback to server).
and i have one updateprogress panel. So my problem is though i'm performing operation on client side , internally the async event is firing and making updateprogress panel to act (having rotation gif image) which i dont want , as it rotates for 10-15 sec more even after the operation at client side is done !
I have the below code in my project..however its giving me an error on the update(bolded line)..please help me on this..
Private Sub ChangePassword1_ChangedPassword(ByVal sender As Object, ByVal e As System.EventArgs) Handles ChangePassword1.ChangedPassword lblTempPassword.Text = ChangePassword1.NewPassword.ToString CustomerName.Text = CType(Session("UserName"), String) Dim FV1Updobjconn As Data.SqlClient.SqlConnection FV1Updobjconn = New Data.SqlClient.SqlConnection() FV1Updobjconn.ConnectionString = ConfigurationManager.ConnectionStrings("ASPNETDBconnectionString1").ConnectionString FV1Updobjconn.Open() Dim dtUpdating As New Data.DataTable() Dim sqlUpdating As String = "UPDATE [SuperAdmin] SET [TempPasswd]= @SU2TempPasswd, [TempPwd]=@CU2TempPwd WHERE ([CustomerName] = [@CU2CustomerName])" Dim cmdUpdating As New Data.SqlClient.SqlCommand(sqlUpdating, FV1Updobjconn) cmdUpdating.Parameters.AddWithValue("@SU2UserId", UserIDValue.Text) cmdUpdating.Parameters.AddWithValue("@SU2TempPasswd", lblTempPassword.Text) cmdUpdating.Parameters.AddWithValue("@CU2TempPwd", False) cmdUpdating.ExecuteNonQuery().... I get an error here saying..INVALID COLUMN "CU2CustomerName" ' Dim adUpdating As New Data.SqlClient.SqlDataAdapter(cmdUpdating) ' adUpdating.Fill(dtUpdating) ' Get the values needed to be passed on ' CtSUCompanyName.Text = dtUpdating.Rows(0)("CompanyName").ToString() ' CtSUCatPurch.Text = dtUpdating.Rows(0)("CategoriesPurchases").ToString() FV1Updobjconn.Close() End Sub
I have written a Crystal reports web application, that prompts ths user for parameters and then apply them and exports the report to a folder as .rpt and then display the report.
I prompt the parameters on one screen and then display the report on another page. I have the AJAX update panel and update progress controls in the parameter page. When the user enters the parameters and click on ok, I export the report and then loads the report to a session report document and transfer the user to the second page where the report is displayed. I use the following code to do transfer to the seconds page.
I have excluded the report load and parameter assign code here.
[Code]....
In the second page I have the following:
rptViewer.reportsource = Session("rpt")
My problem is this works one time and then stops working the second. What I found out was it comes to the statement:
Response.Redirect("show.aspx")
But it does not even load the show.aspx page. It stays on the parameter page. There are no errors displayed. I could not see any errors when I debug the application also. And out of the blue it works sometimes. And if I remove the update panel and progress control, my report works all the time.
I am referring below url link for update progress, how can i use if i have multiple update panel in page and how to make it working without mentioning sleep time, like it works update hides when processing complete else it works till execution
I want to use a progress update and have the code, but it won't let me put it on the screen where I want to. How can I control where it is on the screen?using asp.net; vb web developer 2008; access db
I'm using a an Ifram that switches between several pages, each page contain a report viewer and takes time to load (about five seconds) since I'm using an Ifram the end user will not notice the loading of the page behind the seen (report pages) he will only notice a quick loading of the Ifram page ! so I tried to use the update panel and the update progress to show a waiting or loading progress image when the page loads or post back . but this doesn't work in Ajax since Ajax is not compatable with the report viewer .is there any way to show a progress waiting message during the page load using Javascript ?I Found many scripts like this that show a waiting message or image BUT the script starts after the page loads completely (a silly loop for 3 seconds maybe then hide the message )
There is a nice video on progressbar at [URL] where the URL is: [URL] But the progressbar is not displayed modally. It only gives an illusion of being modal based on the CSS. If I put another button either within the Updatepanel or outside, I am able to click it, and it post backs. Is ther any other settings needed to be added or it will never be modal? I have included the code downloaded from the site along with my extra button.
Problem is, within datalist 2, I have some linkbutton's and I'd like to show a progress "gif" (update progress) when the button is clicked. I can create the update progress, but when you click the button, you get the "gif" shown for every item in the nested datalist. Anyone know how I can identify where I am in the datalist (which linkbutton) and only show the progress "gif" for that button?
