AJAX :: ModalPopupExtender Warning On DropDownList Selection?
Nov 12, 2010
Is there a way that if certain items are selected in a DropDownList to fire up a ModalPopupBox. Basically if any value except for one value is selected, I want a popup warning them, are you sure?
I have the Popup Frame, I have the Popup Extender. I just don't know how to wire the two together using the TargetControlID. I don't want the popup to just automatically come up when the dropdownlist is selected but only if its not value "X".
I figured instead of doing this in parallel, I could check it after the fact when the form is posted using the extender.show() command but my program is crashing because the targetcontrolid for my modalpopupextender is null. I don't have a targetcontrolID in that case?
How can I fire a ModalPopupExtender on the SelectIndexChanged event of a dropdownlist?
I only want it to fire when a particular value is chosen in the list.
I tried leaving the PopupControlID value out and calling .Show() on my extender in the onselectchanged event, but it would not allow me to have a blank PopupControlID. If I set the PopupControlID to the ID of my dropdownlist, the popup fires as soon as I click on the dropdownlist control.
I have a form in which I have a gridview with a LinkButton culumn in which when the user clciks a modal popup extender shows up. In the modalpopup I have a dropdownlist which is filled from DB in code behind. but when the user clicks on Add button in modalpopup panel, the selected value of the dropdownliast is always its default value.
[Code]....
here is my code behind:
[Code]....
I traced my code behind, the fillData() which fills up dropDownList is called only once in page load's first time.
PS. I understood the problem exists only when the modal is poped up by linkbutton click of gridview. when It is poped up by a button outside the grid it workes fine.
I have a modalpopup extender that is brought up if the user presses a button. This is fine and the user can enter the data. There are a number of textboxes and dropdownlists. However, I have a gridview which I want to bring up modalpopupextender so the user can edit an entery. How can I set the data to the controls? A dynamicpopulate extender will repopulate the modalpopupextender with all the data. It doesn't make sense for me. Is there anyway I can populate the data with c#? Also can I assign two buttons to call the modalpopupextender?
I'm trying to put a updateprogress into a webpage where selection from the dropdownlist causes postback. Works out well except that on the first postback, the gif image shows on the leftside rather than on the center. On succeeding postback, it will show on the centre where I intend it to be. Below is my code:
I have an application whereby a user browses to an Ajax enabled page, sets up some filters, and then clicks on download report. When the user clicks on this button, they are redirected to a Download.aspx page, which builds up the report and appends it to the response as binary (the file may either be zip/pdf or excel). The issue I am having is that everytime the user goes to the page and hits the download button the warning message from IE pops up "To help protect your security internet explorer has blocked this site from download files to your computer". This is not a huge issue, but the problem is that when the user clicks this warning to accept the file, it reloads the page, and all my filters are lost, so the user has to set up all the filters to filter out the data they dont want and then re-download the file.
The interesting thing is that I thought I could track the filters using session variables, so that when the page reloads after accepting the warning message it could be restored, but IE for some reason is not loading the page in the way it should, and so the Page_Load method is never fired when IE reloads it after the user accepting the warning, so I cannot restore the filter settings on the page because I have no event to do it from!
I have searched and searched for a solution.. I have tried changing the mime headers - I am using content-disposition tag set to "attachment; filename=report.zip", I have tried changing the mime type descriptions to different things to see if I can avoid the warning but to no avail. I have tried using an iframe but couldnt quite get it to do what I want it to do, the page was still being refreshed..
I have a dropdown list which has states retrieved from a table. I want to have an option to add new states.. I have added a list item NEW in the dropdown. When I click on NEW i should get a pop up to add a new state and goes in the table.
I have used jquery plugin for multiselect dropdown from the [URL] .... and when I submit the page It show nothing selected when post back from server What should I do ?
like to display infowindow as it is in google maps on selection of Dropdownlist with data dynamically binded using VB.net can anybody provide me the code.
I have dynamically popute the data in Dropdownlist(Countries) and the On selected index event of Dropdownlist there is noeed to bind /populate the Checkbox list from database depending on the selections made from the Dropdownlist.
For example If I select Gujrata then all the cities of Gujrat should be visible and bounded to the check box list.
2) Once the checkbox list is bounded with data from the database, We need to select the checkbox from the checkboxlist and pass tyhe selected text of all the selected checkboxes fro the checkbox list as comma seperated values to database and then I need to Display in the Grid.
Below is my code for Dynamically populated/Bind DropDown list and get the States:
I would really appreciate if someone can find out what's wrong with this code.
Here is my question. I have textboxes in a modal popup extender (City, state, zip) and there is an image button search for searching the address from the database. All this functionality is within a control (.ascx file). This control is added to the page where it needs to be displayed and is being displayed when a user click the Address button (the code for it is not shown here). The method ShowAddressSearch() in the control is being called from the page and it displays the popup.
When the user enters any of the 3 values and hits search a server event is fired up and the result should be displayed in a grid. What is happening is, when the user hits the search button the server call is made and the data fetched from the db but the modal popup closes itself here is the code for this. I would really appreciate if someone can find out where and how popup is getting closed.
I am having two dropdownlist in my project,one dropdownlist for empid, another dropdownlist for month, if the user select the empid, the values are retrieved in the textbox.
In the second dropdownlist, if the user select the month in the dropdownlist it will display the leave details, its all working fine, if the user again select the first dropdownlist that means empid, I want to show the second dropdownlist as select month, how can do this.....
I have a dropdownlist on my page with dates such as 1/1/2013, 2/1/2013, etc.
Then there is a second ddl.
If the date in ddl #1 is before 1/10/2013 I want to enable ddl #2. If the date in ddl #1 is on or after 1/10/2013 I want to either disable ddl #2 or hide it (whichever's easier).
Disabling ddl #2 based on the selected date is a new requirement so I am enhancing the existing code. Obviously I want to do this without a postback, but I don't know what is the best way. I am trying to understand what an AsyncPostBackTrigger is because this is the existing code:
I have a modal popup extender with one control (ascx) this control has a label that on onclic method call other popup extender.
It's has other ascx, it's has a button for a search. When I do Click in this button in first time, the event click not fired and there are a javascript error that say "this._activeDRagVisual is null reference".
In the other hand, If a use de second popup inside an asp page the event and control work correctly. The problem is with the popup inside popup.
I have 2 dropdownlist, one is to dropdown department, and another dropdown staffnames. the secong dropdownlist will based on the selection of department as each department has different staffs i have 2 tables department and staff in my database , in my department table i have departmentid as PK and departmentname, in my staff table i have staffname and departmentid as FK. So my ques is how am i going to populate staffname in the dropdownlist according to the selection of department.
I have one table which contains branch codes(primary key), Branch name and bank name columns. I have 3 dropdownlist boxes. the first dropdownlist is for the branch codes. When i select the a branch code i need the second dropdownlist box to populate with the appropriate branch name and the third dropdownlist box to populate the bank name at the same time.
Is it possible to have one table like mine and acheive this, if so how do i go about doing this?
I did read up on this but only came across ones with 3 tables.
I have an asp.net webpage with an modalpopupextender inside of an updatepanel. When I click Ok on the popup, I can get the textbox values from the popup just fine, but the DropDownLists have the old/default value, not the new value I have selected for them.
All the controls on the popup are set to enableviewstate = true, and autopostback = false (I just want to make the trip to the server when I click the ok button, not every time I change the value of the popups).
I have a TextBox1 and a Search button in my application with this following code: protected void Button1_Click(object sender, EventArgs e) { Response.Redirect("~\searchpage.aspx?PatientNRIC=" + TextBox1.Text); }
Which means, if the user type ONLY IC NO:S1234567D, then when click it will show the patient detailview. So I now I'm doing almost the same thing but now I have a TextBox2 and a DropDownList1. Inside DropDownList1, I have "Name", "IC No", "Test_Date". So for an example, I type "S1234567D" in the textbox1, and I choose "IC No" in DropDownList1 it should redirect me to a page of the S1234567D's patient detailview. How could I do my code?
